Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image LAN Cable Certifiers Small Arrow Ideal Wavetek Certifiers Small Arrow SignalTek Small Arrow Signaltek

  Click Here
To View Our Return Policy
Corner Image Corner Image

1I01 - Ideal SignalTek Cable Qualification Tester

IDEAL SignalTek Gigabit Ethernet Cable Qualification Tester

Offers service detection to verify true 10/100/1000 Mbps Ethernet operation

Provides comprehensive cable testing for voice, data, and video applications

Includes Carrying Case & Accessories As Listed

Signal Tek

IDEAL SignalTek Cable Qualification Tester Signal-Tek Cable Qualification Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 6491A 6491B

Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
Condition Refurbished / Calibrated
  • IDEAL SignalTek Cable Qualification Tester (BC# 6491A)
  • IDEAL SignalTek Cable Qualification Remote (BC# 6491B)
  • (2) RJ45 To Dual Clip Cables
  • (4) RT45 To Coax Cables
  • (2) Ethernet Cables
  • (2) RJ11 Patch Cables
  • (2) Coax Adapters
  • (2) RJ11 Adapters
  • Signaltek Training Video
  • (2) AC Adapter/Chargers
  • USB PC Interface Cables
  • User Manual On CD-ROM
  • (2) Straps For Units
  • Carrying Case
Corner Image Table Bottom Corner Image
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
 SignalTek Cable Performance Tester

Document Performance of Twisted Pair Voice and Data Cabling
SIGNALTEKâ?¢ provides a technically innovative method to test and document the performance of voice, data, and video applications for cabling installers and network technicians.

A technically innovative performance, monitoring and network troubleshooting tool
In addition to cable performance qualification, SIGNALTEKâ?¢ can be configured to run for several minutes or hours at a time. While stress testing critical network links, SIGNALTEKâ?¢ transmits hundreds of Gigabits of information across the network while looking for dropped packets. This monitoring mode allows SIGNALTEKâ?¢ to be used to isolate intermittent network problems that are difficult to detect. Adopting the latest generation of Gigabit Ethernet technology, IDEALâ??s innovation brings the best performance to this new class of affordable testers.
  • Offers service detection to verify true 10/100/1000 Mbps Ethernet operation
  • Provides Bit Error Rate test for VoIP, data, and video-over-IP applications
  • User-defined data logging and network monitoring to detect problems that may cause network outages
  • Selectable test modes to qualify cabling support of Data, Voice over IP, and IP Video transmissions
High-Performance Gigabit Ethernet Testing
SIGNALTEKâ?¢ is the most cost-effective Gigabit Ethernet cable performance tester in the world. It tests the linkâ??s ability to support applications by transmitting Ethernet packets on the link and measuring performance according to the IEEE 802.3ab Gigabit Ethernet standard, the ultimate performance indicator for any network.
  • Provides comprehensive cable testing for voice, data, and video applications 
  • Performs complete wiremap and length tests of: 1, 3, and 4 pair UTP/STP, and series 6/59 coaxial cable to TIA-568 A/B and TIA-570 standards 
  • Performs a full IEEE 802.3ab compliant Gigabit Ethernet packet test in about 35 seconds with 97% performance certainty
  • Includes a TDR (Time Domain Reflectometer) for accurate length measurements and to aide in locating cabling faults by providing distance to short/open information
  • Alligator clips allow testing of speaker, alarm, thermostat, home automation devices, and nearly any other type of control wire
A flexible tool to test any IP device
Internet Protocol (IP) is fast becoming the standard communications protocol for every type of network and home technology device. SIGNALTEKâ?¢ leverages its tri-speed (10/100/1000) Ethernet processor to provide performance and activity testing of any addressable IP device in the network.
  • IP pinging can be used to verify the communication of many devices including IP cameras, home automation, and A/V control panels
  • Offers network diagnostic tools such as link establishment, port LED blink, and ping
  • Supports static and dynamic (DHCP) IP configuration
  • Allows multiple target IP and web addresses for pinging several network devices and confirming operation of network switches and routers
SIGNALTEKâ?¢ makes reporting and data storage easy
The SIGNALTEKâ?¢ reporting and data storage system is designed for installers and network technicians with ease-of-use and flexibility in mind.
  • Generates easy pass/fail reports of link performance in accordance with IEEE 802.3ab standards
  • Stores 20,000+ records on internal memory
  • Accepts USB memory drives for unlimited storage
  • Direct printing to supported USB printers
  • No special software required, view reports with any web browser
  • Gigabit Performance Qualification
    • Test to IEEE 802.3 standards
  • Selectable Performance Testing
    • Qualify performance of Data, Voice over IP, and IP Video applications
  • Performs Gigabit Ethernet link establishment test in 10 seconds 
  • Data Monitoring
    • To detect intermittent network problems
  • Smart Autotest Function
    • detects the presence of the SIGNALTEK remote, active network device or open ended cable and automatically runs the appropriate test suite
  • Intuitive Graphical User Interface 
    • for fast and easy operation
  • Internal and USB Data Storage
    • store 20,000 tests internally or unlimited on USB drive
  • Prints Easy-to-Read Pass/Fail Qualification Reports

Cable Types
Voice/phone cable USOC/RJ11/RJ12 interface
Data cable (STP/UTP) RJ45 for CAT 3/5e/6/6a/7 cabling
Coax cable via RJ45-to-F patchcord, series 58, 59, 6 cabling (75 ohm)
Cable Length Measurement Exceeds IEEE 802.3 specifications
Battery Life: Standard AA Alkaline Batteries
Standby 90 days
Cable testing 30 hours
Network monitoring 4 hours
RJ45 test interface port
Mini-USB â??Aâ?? device port
Standard USB â??Bâ?? host port
DC power input for long-term network monitoring
Physical Dimensions
Display Handset: 7.9L × 3.6W × 1.5D (20.1cm × 9.1cm × 3.8cm)
Remote Handset: 6.8L × 3.5W × 1.5D (17.3cm × 8.9cm × 3.8cm)
Near-end Weight: 12.5 oz. (354g) Weight without batteries
Remote-end Weight: 9 oz. (255g) Weight without batteries

For full Ideal Signaltek product specifications, please click here: Ideal Signaltek
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter