INNO View 500 SM Fiber Optic OTDR w/ V20 Fiberscope
$4,800.00
Availability:
Out of stock
SKU
INN32
Condition: Brand New / Calibrated
Warranty: 3 YEAR WARRANTY
Request a Quote for
INNO Instruments View 500 SM Fiber Optic OTDR
The VIEW500 OTDR is used in the installation and maintenance of fiber optic cables. Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The VIEW500 offers accurate and fast test results and creates a report automatically. The VIEW500 is equipped with an industrial grade CPU for creating and storing test results.
Features:
OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.
VFL
VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.
OPM
OPM is used for measuring the absolute optical power meter or relative optical power loss through the span of the optical fiber.
SOLA
SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.
FIBER MICROSCOPE
Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.
LIGHT SOURCE
Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.
ULTRA-HIGH CAPACITY BATTERY
VIEW500 offers the ultra-high battery capacity of 7800mAh.
Specifications:
Inno V20 Fiber Optic Microscope
Fiber Microscope is mainly used in checking whether the fiber end face is clean or not. With the ability of displaying a clear image and function of double amplification, S8 is able to analyze the cleanliness of the fiber end face.
Importance of a clean connector end interface
It is an essential procedure and a best choice to utilize auto analysis software to test the connector and assess the quality of the connector during the commissioning and installation of the fiber. It is very important to save the verification records of the connector for future reference. The end- to- end verification can be achieved by combining the test to the connector with the fiber verification. Follows are the test images displayed.
Equipped with PC testing software specially
By USB connection, the software can be installed on PC conveniently and the results can be analyzed only by such procedures: connecting the optical fiber to the device, adjusting the sharpness and then tapping “screenshot”.
Features:
Specifications:
For full INNO View 500 specifications, please click here: INNO View 500
The VIEW500 OTDR is used in the installation and maintenance of fiber optic cables. Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The VIEW500 offers accurate and fast test results and creates a report automatically. The VIEW500 is equipped with an industrial grade CPU for creating and storing test results.
Features:
- SOLA (Smart Optical Link Analyzer)
- 7” Touch Screen with Smart GUI
- 8GB Internal Storage with Internal SD Card & External USB Memory
- Built-In VFL, Light Source and OPM
- Fast Booting Time
- Ultra-High Capacity Battery
OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.
VFL
VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.
OPM
OPM is used for measuring the absolute optical power meter or relative optical power loss through the span of the optical fiber.
SOLA
SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.
FIBER MICROSCOPE
Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.
LIGHT SOURCE
Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.
ULTRA-HIGH CAPACITY BATTERY
VIEW500 offers the ultra-high battery capacity of 7800mAh.
Specifications:
| Display | 7 inches, High Brightness TFT LCD, resolution of 800×480 |
| Distance unit | m / km / mile / ft |
| Dynamic range | 35dB / 33dB (1310nm / 1550nm) |
| Measurement range (km) | 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360km |
| Measurement range (mile) | 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7 mile |
| Pulse width | 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs |
| Event dead zone | 0.8m |
| Attenuation dead zone | 4m |
| PON dead zone | 40m |
| Distance accuracy | ±(1m+Distance×2.5×10-5 +Sampling resolution) |
| Loss scale linearity | ±0.1dB or ±0.05dB / dB |
| Sampling points | 160,000 points |
| Splitting ratio | Up to 1:64 splitter |
| Resolution | 0.04m ~ 10.24m |
| Battery capacity | Operating Time : Up to 12hours |
| File format | SOR(Telcordia), BMP, JPG |
| External connection | USB 2.0 |
| Compatible connector | APC(FC, SC, LC), UPC(FC, SC, LC, ST) |
| Power supply | AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A |
| VFL Distance | Up to 15km |
| VFL Module | Operating wavelength: 650nm ±10nm, Universal interface: 2.5mm |
| VFL Output power | 20mW |
| Light source | Operating wavelength: 1310nm / 1550 nm ±10nm |
| Light source output power | -5dBm |
| Optical power meter | Wavelength calibration: 850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650nm |
| Power range (OPM) | -70 to +6dBm |
| Accuracy (OPM) | 0.01dB |
| Unit display for OPM | dB, dBm, uW |
| PACKAGE | |
| OTDR | VIEW500 |
| Power cable / AC Adapter | ACC-25 / JS-180300 |
| GENERAL SPECIFICATIONS | |
| Dimension | 7.08H x 10.70W x 2.44D inches (180H x 272W x 62D mm, excluding rubber bumper |
| Weight | 4.19pounds (1.90kg with battery) |
| Operating conditions | -10~50? |
| Storage conditions | -20~60?, |
| Relative humidity | 0~95% (Noncondensing) |
Inno V20 Fiber Optic Microscope
Fiber Microscope is mainly used in checking whether the fiber end face is clean or not. With the ability of displaying a clear image and function of double amplification, S8 is able to analyze the cleanliness of the fiber end face.
Importance of a clean connector end interface
It is an essential procedure and a best choice to utilize auto analysis software to test the connector and assess the quality of the connector during the commissioning and installation of the fiber. It is very important to save the verification records of the connector for future reference. The end- to- end verification can be achieved by combining the test to the connector with the fiber verification. Follows are the test images displayed.
Equipped with PC testing software specially
By USB connection, the software can be installed on PC conveniently and the results can be analyzed only by such procedures: connecting the optical fiber to the device, adjusting the sharpness and then tapping “screenshot”.
Features:
- Detecting fiber connection
- Centering the image
- Image magnification
- Adjust the focus
- Analyze data to judge whether passed of failed
- Testing report
Specifications:
| Resolution | 3.2μm |
| Image sensor | 640 x 480 (VGA) |
| Visual test | < 5μm |
| View angle | 200μm*200μm of high magnification 360μm*360μm of low magnification |
| Light source | Blue LED |
| luminance technique | Coaxial |
| Digital zoom | 3 Grades |
| Connector | USB 2.0 |
| Operating temperature | -10°C to 50°C |
| Storage temperature | -40°C to 70°C |
For full INNO View 500 specifications, please click here: INNO View 500
Inno View 500 SingleMode 1310 / 1550nm Fiber OTDR w/ Power Meter, VFL & Light Source
&
INNO V20 Fiber Optic Microscope
Choose between APC or UPC Connector Polish Style
|
|
This Is A Brand New, Never Before Used Kit!
Dynamic Range:
1310 / 1550 nm : 35 / 33 dB
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
Source:
- 1310nm
- 1550nm
Visual Fault Locator
Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation
Includes Hard Carrying Case & Accessories As Listed
View500 View-500
INNO View 500 View500 OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 33768 33769
- INNO View 500 SM Fiber OTDR (BC# 33678)
- SM OTDR Source:
- 1310nm
- 1550nm
- Light Source:
- 1310nm
- 1550nm
- SC Connector For Source
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 1650nm
- LC Connector For Power Meter
- FC Connector For Power Meter
- Visual Fault Locator
- SM OTDR Source:
- INNO V20 Fiber Optic Microscope (BC# 33769)
- 2.5mm & 2.5mm Angled Tip For Scope
- 1.25mm & 1.25mm Angled Tip For Scope w/ Case
- (4) Fiber Wipes
- Stylus
- AC Adapter/Charger
- Power Cord
- Case For Unit
- User Manual On CD-ROM
- Hard Carrying Case w/ Strap