Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image DSL / T1 / Copper / TDR Small Arrow JDSU Acterna Small Arrow SmartClass Series Small Arrow SmartClass T1

  Click Here
To View Our Return Policy
Corner Image Corner Image

2A09 - JDSU SmartClass T1 Network Service Tester

JDSU SmartClass T1 Network Service Tester

Offers Thorough T1 testing including BERT, Loopcodes, and NIU/ CSU emulation

Includes Carrying Case & Accessories as Listed

JDSU CSC-T1 SmartClass T1 Service Tester CSCT1 SmartClass T1 Service Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 29319-L/T*

Price: $895.00 / Each

Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
Condition Refurbished / Calibrated
  • JDSU SmartClass T1 Network Service Tester (BC# 29319-L/T*)
  • RJ45 To Dual Bantam Cable
  • Ethernet Cable
  • AC Adapter/Charger
  • RS232 PC Interface Cable
  • Carrying Case w/ Strap
Corner Image Table Bottom Corner Image
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
JDSU SmartClass T1 Tester
The JDSU SmartClasss T1 is a handheld field tester for the installation and commissioning of T1 services. An economical and easy to use pointsolution, the SmartClass has a Smart Auto Configure (AutoConfig) feature and large, easy to read color display that make the lightweight, rugged, tester ideal for both service provider and contractor field technicians. It also meetsthe needs of mobile operators in the construction of T1 backhaul infrastructure. The SmartClass T1 can be used in theCentral office, in the field, and at the point of demarcation.

  • Thorough T1 testing including BERT, Loopcodes, and NIU/ CSU emulation
  • VT100 Emulation for access to T1, HDSL, HDSL2, HDSL4 wire performance statistics
  • T-Berd advanced stress patterns, intelligent repeater loop codes, and built in BERT patterns included
  • Supports JDSU Hand Held Manager for result download and configuration management
  • Lightweight, rugged, water resistant, and battery powered handheld test instrument.

  • Terminate, Monitor, bridge, and local loopback modes of operation
  • Full or Fractional (NX64,NX56) T1 Bert testing
  • Perform VF level, frequency and VF Channel drop
  • DS1 Frequency and level Measurements
  • Timing Slips Analysis
  • Round-Trip delay
  • Pulse shape
  • Jitter

Overall dimensions (H x W x D) 9.05 x 4.72 x 1.97 in 230 x 120 x 50 mm
Weight Less than 2 lbs
Display 320x240 color display
Storage Temperature -40 to 167 F (-10 to 60C)
Operating Temperature 32 to 122 F (0 to 50 C)
Humidity 10 to 90% relative humidity, noncondensing
AC adapter 100-220 at 60Hz or 200-240 at 50 Hz VAC to 12 VDC, 1.25 amps
Battery AA Rechargeable NiMH
Charging time Maximum of 5 hours from full
Transmitter Specification
Line Build Out (LBO) Level LBO of 0, 7.5, 15.0, and 22.5 dB of cable loss at 772 kHz
LBO Accuracy +/- 2 dB at 772 kHz relative to an LBO of 0dBsx
Timing Internal reference clock: ± 5 ppm ± 1 ppm/year accuracy Recovered from Primary Recovered from Secondary
Line Codes AMI or B8ZS
Error Insert Type Bit, BPV, CRC, or Frame
Pulse Shape With output terminated at 100 ohms resistive load and 0 dB LBO selected, the product shall meet the following: ITU-T Recommendation G.703, ITU-T Recommendation G.704, T1.102-1993
Output Jitter T1.102 - 1993 Table 9
T1 Connector Two [2] RJ48 and 4 Bantam
Receiver Specifications
Bridge Impedance: > 1000 Ohms
Input Range: - 6 to –35.0 dBdsx
Terminate Impedance: 100 Ohms +/- 5%
Input Range: + 6 to –35.0 dBdsx
DSX-MON Impedance: 100 Ohms +/- 5%
Input Range: -20 to -30 dBdsx of resistive loss plus 0 to -6 dB of cable loss

For full JDSU SmartClass T1 product specifications, please click here: JDSU SmartClass T1
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter