JDSU Acterna DSAM-2610B xt Digital CATV Meter
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
| DSAM-2610 Features | * = Factory Installed N/A = Not Available OPT = Optional |
| Channel Bandwidth | * |
| Standby Mode | * |
| Analog Video - Signal Leve, Mini-scan, Full Scan, Tilt | * |
| Digital Video - Same as analog plus QAM, MER/BER | * |
| 2-Way Upstream test (DOCSIS Ranging) and Upstream Spectrum | * |
| Dynamic DOCSIS Range/Register, Packet Loss, Throughput & Ping | * |
| Web Access Test | * |
| BER For Deep Interleave (128,4) | * |
| Full Downstream Spectrum | N/A |
| Constellation | N/A |
| IP Test via Ethernet Jack | N/A |
| Open Web Browser | OPT |
| PathTrack Field View with RSG | OPT |
| VoIP Test Package | OPT |
| Closeout Test | OPT |
| NOTE: The DSAM-2610 & DSAM-3610 have the Digital Quality Index (DQI) Option Removed | |
The Acterna DSAM is a high-speed data installer meter that increases the number of cable modem installs per day. Using exclusive digital signal processing and integrated DOCSIS chipset technology, the meter communicates with the network CMTS to verify suitable conditions for cable modem installation from the subscriber's location. The DSAM is also equipped with signal level meter capabilities, including spectrum scanning for ingress assessment and mini-scan analysis of up to twelve analog and/or digital channels. The meter's AutoTest capability makes installations easier and more reliabe than ever before.
Highlights
- All-in-one meter includes DOCSIS service testing and SLM features.
- Autotest capability with administration security.
- Environmental resilience and robustness.
- Extensive help system directly linked to meter capabilities.
- Multiple language support.
Specifications
- Frequency
- Range: 4 to 1,000 MHz
- Accuracy: ±10 ppm at 77°F (25°C)
- Tuning Resolution:
- Analog: 10 KHz
- Digital: 50 KHz
- Channel Bandwidth: 6 MHz
- Analog Level Measurements
- Signal Types: CW, video and audio (NTSC, PAL, and SECAM)
- Range: -40 to +60 dBmV
- Resolution: 0.1 dB
- Resolution Bandwidth: 330 KHz
- Accuracy: ±1.5 dB typical @ 25°C
- Digital Level Measurements
- Modulation Types: QPR, QPSK, QAM (DVB/ACTS)
- Range: -40 to +60 dBmV
- Resolution: 0.1 dB
- Resolution Bandwidth: 330 kHz
- Accuracy: ±2.0 dB typical @ 25°C
- Upstream Spectrum
- Spans: 4 to 45 MHz
- Sweep Rate: 1.8 seconds or faster
- Display Scaling & Range: 5 and 10 dB/division; 6 vertical divisions
- Sensitivity: -35 to 60 dBmV
- DOCSIS compatibility: 5 to 42 MHz 42/88 MHz (min. downstream DOCSIS center freq. 100 MHz
JDSU Acterna DSAM 2610Bxt Digital Service Activation Meter
Installed Options:
- Browser
- Field View
- Close-Out
- VoIP Check
- Secure Sync
- CableLabs BPI+ Cert 3
- CableLabs BPI+ Cert 5
- Home Certification
- Docsis 2.0
DSAM2610 DSAM2610B DSAM 2610 2610 XT
JDSU DSAM-2610B xt DSAM2610B xt Docsis 2.0 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 24338
- JDSU Acterna DSAM-2610Bxt Digital Service Activation Meter (BC# 24338)
- Browser
- Field View
- Close-Out
- VoIP Check
- Secure Sync
- CableLabs BPI+ Cert 3
- CableLabs BPI+ Cert 5
- Home Certification
- Docsis 2.0
- Battery Pack
- DSAM Power / Charging Module
- AC Power Cord
- User Manual On CD-ROM
- Carrying Case (G)