JDSU FI-11 Optical Fiber Identifier
$1,495.00
Availability:
Out of stock
SKU
4P214
Condition: Refurbished
Warranty: 90 Day Exchange
Request a Quote for
JDSU FI-11 Fiber Identifier
JDSU’s handheld optical fiber identifier FI-11 probe is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a single mode fiber. By utilizing local detection technology (non-destructive macro-bend detection), it eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service. Signals detected include continuous wave (CW), live optical transmission, and lowfrequency modulated tones at 270, 1000, and 2000 Hz.
When traffic is present on the fiber tested, the direction of transmission is indicated by LEDs illuminating on the probe.When modulated tones are present on the fiber under test, the unit will detect and illuminate the corresponding LED for 270, 1000 or 2000 Hz. The relative core power in the fiber is measured and displayed on a two-digit, sevensegment LED display. This allows for the measurement of power loss through a splice or connector.
The FI-11 has the widest environmental operating range of any optical fiber identifier on the market today.
Benefits:
Featres:
Specifications:
For full JDSU FI-11 product specifications, please click here: JDSU FI-11
JDSU’s handheld optical fiber identifier FI-11 probe is a rugged, easy-to-use installation and maintenance instrument which identifies optical fibers by detecting the optical signals being transmitted through a single mode fiber. By utilizing local detection technology (non-destructive macro-bend detection), it eliminates the need to open the fiber at the splice point for identification; eliminating the probability of interrupting service. Signals detected include continuous wave (CW), live optical transmission, and lowfrequency modulated tones at 270, 1000, and 2000 Hz.
When traffic is present on the fiber tested, the direction of transmission is indicated by LEDs illuminating on the probe.When modulated tones are present on the fiber under test, the unit will detect and illuminate the corresponding LED for 270, 1000 or 2000 Hz. The relative core power in the fiber is measured and displayed on a two-digit, sevensegment LED display. This allows for the measurement of power loss through a splice or connector.
The FI-11 has the widest environmental operating range of any optical fiber identifier on the market today.
Benefits:
- Easy identification of a specific fiber without disrupting the service for your customers
- Non-destructive macro-band detection prevent damage or overstress of the fiber
- Only one unit for single-mode and multimode application
- No need to open the fiber at the splice point for identification; eliminating the probability of interrupting service
Featres:
- Handheld, lightweight, rugged, battery-powered
- Interchangeable adapter heads for: jacketed, coated or ribbon fiber
- Attaches to belt or tool pouch
- Relative zero power reading
- Operates with one hand
- Live fiber identifier
- Operates from 850 nm to 1700 nm
- Compatible with most AT&T and Corning optical fiber
- Easy-to-use
- Core power measurement
- Bidirectional traffic indication
- High-intensity LED indication of active signal transmission
- Detects presence of 270 Hz, 1000 Hz, and 2000 Hz modulated tones
Specifications:
Optical characteristics (using Corning 1528) |
|
Detection technique | non-destructive macro-bending |
Typical loss | <0.6 dB @ 1310 nm typical |
Spectral response | 850 nm to 1700 nm |
Detector sensitivity (MDSP) | -40 dBm typical (equivalent core power) |
Optical tone receiver | 270 Hz, 1 kHz, 2 kHz |
Minimum fiber slack | 0.75 inches/19 mm required for detection |
Core power-reading | 0 to -40 dBm |
Fiber compatibility | |
Dual window single mode | 8 to 10 µm core diameter |
Coating diameter | 250 µm diameter |
Coating | High refractive index acrylate |
Electrical characteristics | |
Power | one 9 V Alkaline battery |
Operation | approx. 10,000 readings |
Environmental conditions | |
Operating temperature | -20 to +50°C |
Storage temperature | -40 to +60°C |
Humidity | 0 to 90% non-condensing |
Physical length | 7.5 inches/190 mm |
Width | 11/4 inches/32 mm |
Depth | 1 inch/25 mm |
Weight | 7.5 oz/213 grams |
For full JDSU FI-11 product specifications, please click here: JDSU FI-11
JDSU FI-11 Live Fiber Identifier
Easy identification of a specific fiber without disrupting the service for your customers
Compatible with most AT&T and Corning Optical Fiber
Includes Carrying Case & Accessories As Listed
FI 11 FI11
JDSU FI-11 FI11 Optical Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 28391
- JDSU FI-11 Live Fiber Identifier (BC# 28391)
- 3MM Fiber Adapter
- 250/RIB Fiber Adapter
- 900 Fiber Adapter
- User Manual On CD-ROM
- Carrying Case