JDSU DSAM-2300 xt kit with accessories

JDSU Viavi DSAM-2300 xt Digital Meter DSAM2300xt

Acterna FST-2310 module with accessories

Acterna FST-2310 Module For FST-2000 TestPad

JDSU Acterna HST-3000C T1 Copper Tester HST-3000

$0.00
Availability: Out of stock
SKU
1L165

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

Acterna HST-3000 Handheld Consumer Services Tester

Improving the installation, maintenance and troubleshooting of DSL services
With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In todayメs market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operatorメs entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.


The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment.

For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing.

Highlights

  • A combined tester for Copper and DSL testing
  • Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
  • Modular hardware and software architecture is flexible and easily upgraded
  • Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
  • Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

  • Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm モmini-bananaヤ jacks
  • ADSL: 8-pin modular
  • 10/100 BT Ethernet jack: 8-pin modular
  • Serial port: DB9 female via cable (DCE)
  • USB Host
  • USB Device
  • Bluetooth short-range wireless

ADSL Standards

  • ANSI T1.413
  • ITU G.992.
  • 1 Annex A
  • ADSL over POTS
  • (G.DMT)
  • G.992.2 (G.Lite)
  • Cisco CAP

General Specifications

  • Ruggedness: Survives 3-ft drop to concrete on all sides
  • Water-resistance: Splash proof: may be used in heavy rain
  • Language: English
  • Keypad: Typical 12-button keyboard

Physical Specifications

  • Size (H x W x D): 9.5 x 4.5 x 2.75 in
  • Weight: 2.7 lb with battery
  • Operating temperature: 22°F to 122°F
  • Storage temperature: ヨ40°F to 150°F
  • Battery life: 10 hrs. typical usage
  • Charging time: 7 hours from full discharge to full charge
  • Operating humidity: 10% to 80% relative humidity
  • Storage humidity: 10% to 95% relative humidity
  • Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

HST-3000 SIM T1 / CU T1 Service Interface Module

Key Features

  • Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation
  • VT100 emulation for access to T1,HDSL,HDSL2, HDSL2-4 wire performance statistics
  • Copper option adds in-depth copper measurements including DVOM, graphical TDR, RFA/RFL, and load coil counter
  • Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures
  • Modular hardware and software architecture allows easy upgrades and enhancements
  • T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included
  • NetAnalyst control of Data Network Analyzer test devices


The JDSU HST-3000 is the ideal instrument for testing T1 services with built-in functionality that reduces repeat rates, failures, and kickbacks and ensures that all tests are performed the same way, every time.


Reduced budgets, smaller workforces, and untrained technicians can limit a carrierメs ability to promptly provision T1 service. Overcoming these obstacles requires resources that facilitate the efficient and rapid deployment of T1 services regardless of whether the T1 line uses traditional repeaters, HDSL, HDSL2, or HDSL2 4-wire circuits.


Technicians use the HST-3000 optional copper test features to qualify and troubleshoot the circuit, and the T1 test features to bit-error-rate test (BERT) the line and verify the service. With the VT100 emulation feature, the HST-3000 provides instant access to HDSL/2/4 performance statistics. There is no need for technicians to switch instruments or modules; the HST-3000 combines all the tests into one tool with one common interface. The HST-3000 custom scripting feature automates the testing process, ensuring that tests are done completely and thoroughly every time and helps reduce repeat rates and failures by ensuring that the processes used to test are consistent. With the HST-3000, technicians can complete faster service turn-ups, reduce failure rates, and lower costs, which are all key components to surviving in todayメs competitive environment.
 

Loopback Testing

Preprogrammed HTU-C, HTU-R, doubler, T1 CSU, T1 NIU, and repeater loopcodes enable the HST-3000 to quickly sectionalize transmission problems. In addition, Pairgain, Teltrend, Adtran, Westell, and ADC equipment specific loopcodes, as well as user configurable loopcodes, are supported. The test set can also emulate T1 customer premises equipment, simulating a CSU or NIU. CSU/NIU emulation allows the test set to be looped up from the central office to verify T1 service across the entire length of the span.

Dual T1 Transmit and Receive

The HST-3000 dual T1 transmit and receive capabilities give the ability to measure timing slips, passively monitor T1 circuits in both directions, and perform drop and insert testing. Using the split screen view in dual monitor mode, a span is easily sectionalized to quickly determine the location of a fault. Drop and insert testing allows the user to BERT single DS0s within a T1, without taking the entire T1 out of service.

HDSL/2/4

Through the test instrumentメs VT100 emulation feature, technicians can access HDSL and T1 network equipment for equipment configuration, specific performance data measurements, and loop up capabilities, without having to carry a laptop into the field. With JDSUメs repeater extender, technicians can also gain access to the circuit at T1 repeaters.

Fractional T1

The HST-3000 performs fractional T1 (FT1) BER tests on selected channels to verify transmission on contiguous and noncontiguous FT1 bandwidth. This allows the technician to verify circuit performance with VF and 577 Hz ID tones at various output levels. In addition, the HST-3000 uses a variety of advanced stress patterns such as 55 octet, T1-DALY, and other long user patterns as recommended by the ANSI T1.403 standard to stress repeatered T1/FT1 circuits. With its enhanced T1 features and functions, the HST-3000 is the ideal test instrument for technicians to troubleshoot and qualify the line swiftly and effortlessly.

Flexible and Rugged Design

The HST-3000 incorporates a rugged, weather-resistant design and long battery life that are ideally suited for use in the field and its modularity allows for field upgrades to support new testing requirements. The HST-3000 is easily upgradeable with technologies and advanced options that support the changing needs of service installers and its dynamic configurability allows it to be used by different technicians with different responsibilities to perform a wide number of tests. Standard Ethernet, USB, and serial connections offer flexibility to easily download software and offload captured test data.

Overview

Beginning with the construction of the circuit, and throughout the life cycle of the service, operators must verify that customers are receiving the quality they ordered. Whether qualifying the copper before handing the circuit over to an installation and maintenance crew, a technician must run a bit-error-rate test (BERT) to prequalify the circuit to ensure that it will run T1 service error free.


DS1 BERT

To verify proper T1 transmission over a traditional repeatered T1 or an HDSL circuit, a technician needs to test the entire span from the central office to the customer premises. A true end-to-end service test requires stressing the span and verifying the error tolerance of the copper plant and network equipment. The HST-3000 includes the advanced stress patterns of the T-BERD to properly stress the network.


For full JDSU HST-3000C T1 product specifications, please click here: JDSU HST-3000C T1

JDSU HST-3000C HandHeld Consumer Services Tester With HST-3000 SIM T1 / CU T1 Service Interface Module With Copper Testing Option Installed

Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation

Installed Options:
- ISDN PRI
- PCM TIMS
- Pulse Shape
- Resistive Fault Locator
- User Scripting
- Spectral Analysis
- T1 Signaling
- Time Domain Reflectometer
- Transmission Impairment Analysis
- VT100 Emulation
- Wide-Band TIMS

Includes Carrying Case & Accessories As Listed

HST3000C HST3000 HST 3000 3000C

JDSU HST-3000C T1 / CU Consumer Services Tester HST3000C T1 / CU Consumer Services Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 22916 22917

  • JDSU HST-3000C HandHeld Consumer Services Tester w/ Options: (BC# 22916)
    • ISDN PRI
    • PCM TIMS
    • Pulse Shape
    • Resistive Fault Locator
    • User Scripting
    • Spectral Analysis
    • T1 Signaling
    • Time Domain Reflectometer
    • Transmission Impairment Analysis
    • VT100 Emulation
    • Wide-Band TIMS
  • JDSU HST-3000 SIM T1/CU Module (BC# 22917) 
  • Test Leads Set
  • RJ45 To Multiple Clip Cable P/N: 21118326001
  • JDSU Serial Cable P/N: 21103806
  • Ethernet Cable
  • (2) BNC Cables
  • DC Car Charger
  • Battery Pack
  • AC Adapter/Charger
  • Power Cord
  • Case For Unit
  • Carrying Case (G)