Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
DSL / T1 / Copper / TDR JDSU Acterna HST Series



  Click Here
To View Our Return Policy

1L87 - JDSU HST-3000 Tester w/ E1 / Datacom Module

JDSU Acterna HST-3000 HandHeld Consumer Services Tester

Installed Options:
- User Scripting

- JDSU HST-3000 SIM E1/Datacom (Datacom & E1 Circuit Tesing)

Includes Carrying Case & Accessories As Listed

HST 3000 3000C

JDSU HST-3000 E1 / Datacom Consumer Services Tester HST3000 Consumer Services Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 21848 21849

Price: $1,895.00 / Each

Condition Refurbished / Calibrated
Warranty 90 Day Exchange
  • JDSU HST-3000 HandHeld Consumer Services Tester w/ Option: (BC# 21848)
    • User Scripting
  • JDSU HST-3000 SIM E1 / Datacom Module (BC# 21849)
  • (2) Ethernet Cables
  • AC Adapter/Charger
  • Power Cord
  • User Manual On CD-ROM
  • Carrying Case (G)

JDSU HST-3000 Handheld Consumer Services Tester

Improving the installation, maintenance and troubleshooting of DSL services
With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.

The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment.

For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing.


  • A combined tester for Copper and DSL testing
  • Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
  • Modular hardware and software architecture is flexible and easily upgraded
  • Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
  • Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

  • Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks
  • ADSL: 8-pin modular
  • 10/100 BT Ethernet jack: 8-pin modular
  • Serial port: DB9 female via cable (DCE)
  • USB Host
  • USB Device
  • Bluetooth short-range wireless

ADSL Standards

  • ANSI T1.413
  • ITU G.992.
  • 1 Annex A
  • ADSL over POTS
  • (G.DMT)
  • G.992.2 (G.Lite)
  • Cisco CAP

General Specifications

  • Ruggedness: Survives 3-ft drop to concrete on all sides
  • Water-resistance: Splash proof: may be used in heavy rain
  • Language: English
  • Keypad: Typical 12-button keyboard

Physical Specifications

  • Size (H x W x D): 9.5 x 4.5 x 2.75 in
  • Weight: 2.7 lb with battery
  • Operating temperature: 22°F to 122°F
  • Storage temperature: –40°F to 150°F
  • Battery life: 10 hrs. typical usage
  • Charging time: 7 hours from full discharge to full charge
  • Operating humidity: 10% to 80% relative humidity
  • Storage humidity: 10% to 95% relative humidity
  • Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

E1/Datacom Service Interface Module (SIM)

•Datacom (X.21, V.24 (RS-232), V.35, V.36 (RS-449), EIA-530)
•G.703: 2 Mbit/s Testing
• 2 RX/2 TX: E1 Interfaces
• Bulk, n x 64 kbit/s BERT
•G.821, G.826, M.2100
• Audio Monitor
• Signal Level and Frequency
• Round Trip Delay
• Event Log and Histograms
• Pulse Shape
• Frame Relay

The JDSU HST-3000 E1/Datacom Service Interface Module (SIM) delivers the full functionality required for technicians tasked with ensuring and delivering high quality of service (QoS) for E1/Datacom. Part of a comprehensive catalog of modules for the HST-3000 platform, the E1/Datacom SIM provides the complete range of installation, maintenance, and troubleshooting features needed for E1/ Datacom circuits and network elements.

Copyright © 2003-2011 | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On FacebookFind Us On Twitter