Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image DSL / T1 / Copper / TDR Small Arrow JDSU Acterna Small Arrow HST Series
 



Share
 
  Click Here
To View Our Return Policy
 
Corner Image Corner Image
 

1L127 - JDSU HST-3000 Tester w/ E1 Module

JDSU Acterna HST-3000 HandHeld Consumer Services Tester

Installed Options:
- Frame Relay
- Pulse Shape
- Remote Operation

INCLUDED MODULES:
- JDSU HST-3000 SIM E1 (E1 Circuit Tesing)

Includes Carrying Case & Accessories As Listed

HST 3000 3000C

JDSU HST-3000 E1 HST3000 E1 Consumer Services Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 16732 16733




 
 
Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
 
Condition Refurbished / Calibrated
Warranty 90 Day Exchange
Included
  • JDSU HST-3000 HandHeld Consumer Services Tester (BC# 16732) w/ Option:
    • Frame Relay
    • Pulse Shape
    • Remote Operation
  • JDSU HST-3000 SIM E1 Module (BC# 16733)
  • (2) Ethernet Cables
  • Battery Pack
  • AC Adapter/Charger
  • Power Cord
  • User Manual On CD-ROM
  • Carrying Case (G)
 
Corner Image Table Bottom Corner Image
Back
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image

JDSU HST-3000 Handheld Consumer Services Tester

Improving the installation, maintenance and troubleshooting of DSL services
With a market primed for broadband, operators are rapidly deploying DSL in their networks to deliver multimedia services over the existing copper wire in the local loop. Traditionally, one set of technicians performed individualized tests that qualified the copper while another set conducted DSL services testing and verification. In today’s market, however, operators can no longer afford the time, capital expense, and labor costs to conduct tests separately and incrementally. Furthermore, test solutions must generate results that have a strategic impact throughout an operator’s entire organization. This may include building customer loyalty by locating and fixing problems quickly, improving profitability by performing more tests with less staff, or leveraging workforce productivity by automating processes, methods, and procedures.


The Acterna HST-3000 is a modular handheld tester that can be built to order, to test the copper, test the DSL service and improve the process. Technicians use the HST-3000 copper base instrumentand the copper service interface module (SIM) to qualify, maintain, and troubleshoot the local loop. This same base instrument, with a second SIM that tests both ADSL and the copper, enables one technician to perform tests thatwere previously conducted by two technicians using different equipment.

For those technicians who only need to test ADSL, the instrument can be configured for ADSL functionality only. Any HST-3000 module equipped to perform ADSL service tests can also verify ISP and Internet connectivity with the Acterna Advanced IP Suite software option. With the HST-3000 minimize the time and reduce the capital expense and labor cost associated with ADSL and copper testing.

Highlights

  • A combined tester for Copper and DSL testing
  • Lower repeat rates with automated close out tests, scripting/pass-fail tests, and back office integration
  • Modular hardware and software architecture is flexible and easily upgraded
  • Laptop/PC integration via RS-232, USB, or wireless for easy results transfer
  • Intuitive, easy-to-use GUI, lightweight, rugged and water resistant

Instrument Interface Specifications

  • Dual TIP/RING and Ground POTS/Copper: Color-coded, shrouded 2mm “mini-banana” jacks
  • ADSL: 8-pin modular
  • 10/100 BT Ethernet jack: 8-pin modular
  • Serial port: DB9 female via cable (DCE)
  • USB Host
  • USB Device
  • Bluetooth short-range wireless

ADSL Standards

  • ANSI T1.413
  • ITU G.992.
  • 1 Annex A
  • ADSL over POTS
  • (G.DMT)
  • G.992.2 (G.Lite)
  • Cisco CAP

General Specifications

  • Ruggedness: Survives 3-ft drop to concrete on all sides
  • Water-resistance: Splash proof: may be used in heavy rain
  • Language: English
  • Keypad: Typical 12-button keyboard

Physical Specifications

  • Size (H x W x D): 9.5 x 4.5 x 2.75 in
  • Weight: 2.7 lb with battery
  • Operating temperature: 22°F to 122°F
  • Storage temperature: –40°F to 150°F
  • Battery life: 10 hrs. typical usage
  • Charging time: 7 hours from full discharge to full charge
  • Operating humidity: 10% to 80% relative humidity
  • Storage humidity: 10% to 95% relative humidity
  • Display: 1/4 VGA monochrome transflective, 3.8-in diagonal (readable in direct sunlight)

JDSU HST-3000 E1 SIM Module

Dual E1RX/TX

Two separate receivers (RX) and transmitters (TX) allow for the simultaneous monitoring and evaluation of a wide range of alarms and errors. Different test modes with clock preferences support all of the requirements for ITU-T G.703 frame analysis, BERT, ITU-T G.821, ITU-T G.826, and ITU-T M.2100. This enables operators to validate connectivity and QoS quickly and efficiently.

E1 Pulse Shape Option
Incorrect pulse shape, due to jitter or incorrectly terminated interfaces, causes poor network performance. The Pulse Shape software option quickly assists in identifying network problems during installation, commissioning, or troubleshooting by comparing the pulsewith the ITU-T G.703 pulse mask.The software averages the received E1 pulse and automatically displays the result against the ITU-T mask.

FrameRelay Option
With the Frame Relay software option, technicians can verify that frame relay service is functioning properly by testing LMI activity, PVC/DLCI status, congestion, and lost framesto validate committed information rates(CIR).

Bidirectional Monitoring
The HST-3000 can monitor transmission passively in both directions to confirm physical layer and service level results on E1 Circuits.

Specifications:

 
Transmitters To G.703
Outputs 2x balanced RJ-48 jacks
Impedance 120ohms
Unbalanced / 75ohms via adapter cables
Bit Rate 2048 kbit/s , +/- 3 ppm, +1 ppm per year aging
Line Code HDB3 or AMI
Frequency Offset +/- 100ppm in 1ppm intervals
Slip Reference Opposite RX, External E1 Reference Clock
Clock Source Internal, Recovered from RX1 or RX2, External E1 Reference Clock (via optional cable)
Receivers To G.703
Inputs 2x balanced RJ-48 jacks
Impedance 120ohms or bridged (hi-Z)
Unbalanced / 75ohms via adapter cables
PMP Compensation 20 to 31dB gain
Bit Rate 2048 kbit/s
Level Measurement +3 to -37dB nom
Slip Reference Opposite RX, External E1 Reference Clock
External E1 Reference Clock 0.5 to 3V square or sine wave, 2,048MHz, unbalanced / 75ohms (at adapter cable input)
E1 Circuit Testing
Framed and unframed test signal generation
Bulk, n x64kbit/s BERT
G.821, G.826, M.2100 analysis
Error and alarm and generation and analysis
Round Trip Delay
Signal Level and Frequency
Audio Monitor
Si, Sa, A-bit, and E-Bit (REBE) monitoring and generation
Test Modes Terminate, Monitor, Drop and Insert, Line Loopback
Performance Measurement G.821, G.826, M.2100
Test Patterns 2^6-1 (ITU), 2^9-1 (ITU), 2^11-1 (ITU), 2^15-1
(ITU & ITU INV), 2^20-1(ITU & ITU INV), 2^23-1 (ITU & ITU INV), QRSS, QBF
Mark (All Ones), Space (All Zeros), 1:1, 1:3, 1:4, 1:7
User Bit Patterns 3 to 32 bits
User Byte Patterns 1 to 64 bytes
Live
Delay
Auto (via Auto Configure)
Anomaly (Error) Injection
Bit (TSE) Single, rate, multiple
Code, CRC, Pattern Slip, E-Bit (REBE) Simple
FAS Single, 2, 3, 4
MFAS Single, 2
Defect (Alarm) Generation LOS, LOF, AIS, RDI/FAS distant, MF AIS (TS-16), MF RDI/MFAS distant
Anomaly (Errors) Counts Bit(TSE), Code, FAS, MFAS, CRC, E-Bit
Frame Data Sa4, Sa5, Sa6, Sa7, Sa8, NFAS A-Bit, NMFA
Signal Results Signal loss (seconds), bit slips, RX level, TX and RX bit rate
BERT Results Bit errors (TSE), bit errorrate, errored seconds, error-free seconds, percentage error-free seconds, pattern slip, roundtrip delay, pattern loss seconds (LFF)
Audio Monitor From RX1, RX2, or RX1 and RX2
Round Trip Delay
Range 0-10 s
Resolution 100 µs
Result Categories Summary, LED, Signal, Frame Data, Timeslot, BERT, Performance (G.821, G.826ISM, G.826 OOS, M.2100ISM, M.2100 OOS), Time, Event Table, Event Log, Event Histogram




For full JDSU HST-3000 E1 product specifications, please click here: JDSU HST-3000 E1
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright © 2003- AAATesters.com | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter