Acterna HST-2500/3000 CU module

Acterna JDSU HST-2500/3000 SIM CU Copper Module

Acterna HST-3000 ADSL2-TX module

Acterna JDSU HST-3000 SIM ADSL2-TX ANX A Module

Acterna JDSU HST-3000 T1 / CU Copper SIM Module

$445.00
Availability: In stock
SKU
1L51

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

Key Features

  • Thorough T1 testing including BERT, loopcodes, and NIU/CSU emulation
  • VT100 emulation for access to T1,HDSL,HDSL2, HDSL2-4 wire performance statistics
  • Copper option adds in-depth copper measurements including DVOM, graphical TDR, RFA/RFL, and load coil counter
  • Lower repeat rates with automated close out tests, scripting, and pass/fail tests loaded with operator specific thresholds for methods and procedures
  • Modular hardware and software architecture allows easy upgrades and enhancements
  • T-BERD® advanced stress patterns, intelligent repeater loop codes, and BERT patterns included
  • NetAnalyst control of Data Network Analyzer test devices


The JDSU HST-3000 is the ideal instrument for testing T1 services with built-in functionality that reduces repeat rates, failures, and kickbacks and ensures that all tests are performed the same way, every time.


Reduced budgets, smaller workforces, and untrained technicians can limit a carrierメs ability to promptly provision T1 service. Overcoming these obstacles requires resources that facilitate the efficient and rapid deployment of T1 services regardless of whether the T1 line uses traditional repeaters, HDSL, HDSL2, or HDSL2 4-wire circuits.


Technicians use the HST-3000 optional copper test features to qualify and troubleshoot the circuit, and the T1 test features to bit-error-rate test (BERT) the line and verify the service. With the VT100 emulation feature, the HST-3000 provides instant access to HDSL/2/4 performance statistics. There is no need for technicians to switch instruments or modules; the HST-3000 combines all the tests into one tool with one common interface. The HST-3000 custom scripting feature automates the testing process, ensuring that tests are done completely and thoroughly every time and helps reduce repeat rates and failures by ensuring that the processes used to test are consistent. With the HST-3000, technicians can complete faster service turn-ups, reduce failure rates, and lower costs, which are all key components to surviving in todayメs competitive environment.

Loopback Testing

Preprogrammed HTU-C, HTU-R, doubler, T1 CSU, T1 NIU, and repeater loopcodes enable the HST-3000 to quickly sectionalize transmission problems. In addition, Pairgain, Teltrend, Adtran, Westell, and ADC equipment specific loopcodes, as well as user configurable loopcodes, are supported. The test set can also emulate T1 customer premises equipment, simulating a CSU or NIU. CSU/NIU emulation allows the test set to be looped up from the central office to verify T1 service across the entire length of the span.

Dual T1 Transmit and Receive

The HST-3000 dual T1 transmit and receive capabilities give the ability to measure timing slips, passively monitor T1 circuits in both directions, and perform drop and insert testing. Using the split screen view in dual monitor mode, a span is easily sectionalized to quickly determine the location of a fault. Drop and insert testing allows the user to BERT single DS0s within a T1, without taking the entire T1 out of service.

HDSL/2/4

Through the test instrumentメs VT100 emulation feature, technicians can access HDSL and T1 network equipment for equipment configuration, specific performance data measurements, and loop up capabilities, without having to carry a laptop into the field. With JDSUメs repeater extender, technicians can also gain access to the circuit at T1 repeaters.

Fractional T1

The HST-3000 performs fractional T1 (FT1) BER tests on selected channels to verify transmission on contiguous and noncontiguous FT1 bandwidth. This allows the technician to verify circuit performance with VF and 577 Hz ID tones at various output levels. In addition, the HST-3000 uses a variety of advanced stress patterns such as 55 octet, T1-DALY, and other long user patterns as recommended by the ANSI T1.403 standard to stress repeatered T1/FT1 circuits. With its enhanced T1 features and functions, the HST-3000 is the ideal test instrument for technicians to troubleshoot and qualify the line swiftly and effortlessly.

Flexible and Rugged Design

The HST-3000 incorporates a rugged, weather-resistant design and long battery life that are ideally suited for use in the field and its modularity allows for field upgrades to support new testing requirements. The HST-3000 is easily upgradeable with technologies and advanced options that support the changing needs of service installers and its dynamic configurability allows it to be used by different technicians with different responsibilities to perform a wide number of tests. Standard Ethernet, USB, and serial connections offer flexibility to easily download software and offload captured test data.

Overview

Beginning with the construction of the circuit, and throughout the life cycle of the service, operators must verify that customers are receiving the quality they ordered. Whether qualifying the copper before handing the circuit over to an installation and maintenance crew, a technician must run a bit-error-rate test (BERT) to prequalify the circuit to ensure that it will run T1 service error free.


DS1 BERT

To verify proper T1 transmission over a traditional repeatered T1 or an HDSL circuit, a technician needs to test the entire span from the central office to the customer premises. A true end-to-end service test requires stressing the span and verifying the error tolerance of the copper plant and network equipment. The HST-3000 includes the advanced stress patterns of the T-BERD to properly stress the network.


For full JDSU HST-3000 SIM T1 product specifications, please click here: JDSU HST-3000 Sim T1

Acterna HST-3000 SIM T1 / CU T1 Service Interface Module With Copper Testing Option Installed

Requires An HST-3000C Mainframe To Operate. Will Not Operate Without A HST-3000C Mainframe.
(HST-3000C Mainframe Not Included In Sale!)

JDSU HST-3000 T1 / CU Service Interface Module T1 CU Service Interface Module Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 21071M-L/T*

  • JDSU HST-3000 SIM T1 / CU Service Interface Module (BC# 21071M-L/T*)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!