Rohde & Schwarz FSH8 kit with accessories

Rohde & Schwarz FSH8 8.08 Handheld Spectrum Analyzer

Anritsu S332E kit with accessories

Anritsu Site Master S332E Cable & Antenna Analyzer

JDSU JD724C CellAdvisor Cable & Antenna Analyzer

$1,699.00
Availability: Out of stock
SKU
6C134

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

 JDSU JD724C CellAdvisor Cable & Antenna Analyzer
The majority of problems in mobile networks occur in the base station?s infrastructure, consisting of the antenna system, RF and fiber cables, and connectors. Properly servicing and installing cell sites requires suitable test equipment. JDSU CellAdvisor JD720C analyzers are the optimal test solutions for characterizing cell-site infrastructure due to their handheld design, ease of use, and rich functionality.

JD720C analyzers have all of necessary measurement functions to characterize cell-site cable and antenna system, including VSWR or return loss reflection tests, distance to fault (DTF), and cable loss. It also can perform RF component measurements, including insertion gain/loss, antenna isolation, TMA performance, and verification of devices such as duplexers and combiners.

The instrument?s 7-inch color touch-screen display simplifies its operation and clearly displays measurement results. Its connectivity to JDSU application software allows for easier measurement analysis and report generation.

In addition, JD720 analyzers are capable of fiber inspection using the JDSU fiber microscope and optical power measurement using JDSU optical power meters. This single integrated solution with RF and fiber capabilities provides all the physical layer tests needed for the installation and maintenance of cell sites.

Key measurements include:
  • Reflection ? VSWR/Return Loss
  • DTF ? VSWR/Return Loss
  • 1-Port Cable Loss
  • 1-Port Phase
  • Smith Chart
  • RF and Optical Power Meter
  • Fiber Inspection
Key Measurements

Reflection measures the cell-site transmission line impedance performance across the selected frequency range in VSWR or Return Loss.
  • The instrument?s database includes over 80 wireless frequency bands with the ability to add more.
  • A user-definable limit line automatically indicates pass/fail status.
  • Users can set up to six markers for trace analysis
Distance to Fault (DTF) identifies fault locations in the cell-site transmission system indicating signal discontinuities using VSWR or Return Loss.
  • Cable length up to 1,500 m (4,921 ft)
  • High-resolution mode with 2001 data points.
  • The instrument?s database includes over 95 cable types with the ability to add more.
  • A user-definable limit line automatically indicates pass/fail status
  • Users can set up to six markers for trace analysis.
1-Port Cable Loss measures the signal loss through cables or other devices over a defined frequency range.
  • A user-definable limit line automatically indicates pass/fail status
  • Users can set up to six markers for trace analysis
1-Port Phase measures S11 phase to tune antennas and to phase-match cables.
  • Users can set up to six markers for trace analysis.
Smith Chart displays impedance matching characteristics in cable and antenna systems as well RF devices.
  • Users can set up to six markers for trace analysis
Power Meter functions easily and comprehensively measure power using external power sensors and meters.
  • JD72450551/2: economic RF power sensors via serial connection
  • JD730 series: high-precision RF power sensors via USB connection
  • MP-60/MP-80: optical power meters via USB connection
The power meter displays either the RF/optical power level in two formats: as a real-time power level value in an analog meter and as a power level trend through time in a histogram chart. Its configurable settings include display range, maximum and minimum limits, and power units in dBm or watts. Users can set minimum and maximum power limits for pass/fail status.

Fiber Inspection eliminates the most common fiber link problems by verifying that connectors are not contaminated. Interfacing with a JDSU fiber microscope, fiber connectors can be quickly inspected with a clear pass/fail indication. The FiberChekPRO? application can be used on a PC/laptop with the fiber microscope to perform the same fiber analysis in parallel using the instrument to test RF and using the PC/laptop to test fiber. Users also can inspect, test, and certify any fiber connector and instantly generate comprehensive pass/fail summary reports with the optical power meter?s results.

Key Benefits

Designed for Field Use
Compact, lightweight JD720C analyzers are especially convenient for performing measurements in the field. The analyzers weigh less than 2.35 kg (fully loaded) and include a lithium ion (LiON) battery that lasts more than 7.5 hours.

Its transflective display can be set to an outdoor mode for viewing measurements in direct sunlight. Also, its backlit key panel with Night Display mode makes it easy to use in the dark.

JD720C analyzers operate in ?10 to +55°C temperatures; and its rugged bumper design protects it for filed use, such as drop and vibration, complying with MIL-PRF-28800F class 2 specification.

Quickly Sweeps
It can perform measurements in less than 0.8 ms/point, making these the fastest cable and antenna analyzers on the market with uncompromising fast sweep speed in Dual Display mode.

Multilanguage User Interface
The instruments? architecture can incorporate different languages into the menu structure.

Easy to Use
Users can create favorite keys to conveniently access repeatedly used measurements rather than configuring them each time, reducing steps and completing tasks quicker and more efficiently. They can add editable key words to quickly create unique file names and can generate a PDF report directly from the instrument.


Key Features

Trace Overlay
Allows users to compare and analyze up to four traces by superimposing them into one measurement display. Additionally, up to six markers can be set on any trace independently

Zoom Zones
User-definable frequency zones can be set to visually identify sub-band regions such as uplink and downlink frequencies to verify compliance within a single measurement and independent view for closer analysis of each zone.

Alternate Sweep in DTF
Allows users to perform two independent sweeps and to display the measurements, such as a reflection and a DTF, in the same window.

Dual Display
Provides the ability to display two measurements simultaneously, reducing test time.

Peak and Valley All Zones
Allows users to easily and automatically set markers to identify the trace peaks and valleys in each zone.

Limit Lines
Limit lines let users set variable testing thresholds with automatic pass/fail indication.

Standard Limit Line
The standard limit line extends over the full measurement frequency range and can be configured to indicate a fail when measurements exceed it. Users can also set a limit line for only specific sections.

Multisegment Limit Line(MSL)
Multisegment limits let users set upper- and lower-level thresholds for greater flexibility than single limit lines. Measurements falling within the mutisegment limit line boundaries are indicated as pass, while measurements outside the boundaries are indicated as fail.

Window Limit
Window limit lets users define a measurement area in which to apply the test criteria. Measurements within the configured area are compared to the defined threshold and are indicated as pass/fail based on whether they fall within or outside the threshold. This capability is useful for tuning devices or antennas in real time.

Help Function
The Help function gives users task-based information related to instrument operation or the test performed. Users can then easily browse or search topics to get specific information.

Specifications:
Frequency
Range
5 MHz – 4 GHz
Resolution 10 kHz
Accuracy  ±25 ppm at 25°C
Aging ± 5 ppm
Data Points 126, 251, 501, 1001, 2001
Measurement Speed
Reflection < 0.7 ms/point
DTF < 0.8 ms/point
Measurement Accuracy
Corrected directivity 42 dB (typical)
Reflection uncertainty ±(0.3 + |20log (1 + 10-EP/20)|) (typical)
EP = directivity – measured return loss
Output Power
High 0 dBm (nominal)
Maximum Input Level
Average continuous power
+25 dBm (nominal)
DC voltage ±50 V DC
Interference Immunity
On channel +15 dBm (nominal)
On frequency +5 dBm (nominal)
RF Power Meter (Standard)
Display range –80 to +120 dBm
Offset range 0 to 60 dB
Resolution 0.01 dB or 0.1 x W (x = m, u, p)
Optical Power Meter (standard)
Display range
–100 to +100 dBm
Offset range
0 to 60 dB
Resolution 0.01 dB or 0.1 mW
Measurements
Reflection (VSWR)
VSWR range 1 to 65
Return loss range
0 to 60 dB
Resolution 0.01
Distance to Fault (DTF)
Vertical VSWR range 1 to 65
Vertical return loss range 0 to 60 dB
Vertical resolution 0.01
Horizontal range 0 to (# of data points – 1) x horizontal resolution
Maximum = 1500 m (4921 ft)
Horizontal resolution (1.5 x 108) x (VP)/delta
VP = propagation velocity
delta = stop frequency – start frequency (Hz)
1-Port Cable Loss
Range 0 to –30 dB
Resolution 0.01 dB
1-Port Phase
Resolution –180 to +180°
Smith Chart
Resolution
0.01
General Information
Reflection/RF Out
Connector Type‐N, female
Impedance 50 Ω (nominal)
Damage level
> +40 dBm, > ±50 V DC (nominal)
Connectivity
USB host Type A, 2 ports
USB client Mini B, 1 port
LAN RJ45, 10/100Base-T
Serial 9-pin D-SUB male
Display
Type Resistive touch screen
Size 7-inch, LED backlight, transflective LCD
Resolution 800 x 480
Speaker
Built-in speaker
Power
External DC input 12 to 15 VDC
Power consumption 12 W 34.5 W maximum (when charging battery)
External AC Power Adapter
Input 100 to 250 V (50 to 60 Hz, 1.2 A)
Output 15 V DC, 4 A
Battery
Type
10.8 V, 7800 mA/hr (LiON)
Operation time >7.5 hr (typical)
Charge time 3 hr (80%), 5 hr (100%)
Charging temperature 0 to 45°C (32 to 104°F) ≤85% RH
Discharging temperature –20 to +55°C (4 to 131°F) ≤85% RH
Storage temperature 0 to 25°C (32 to 77°F) ≤95% RH (noncondensing)
Data Storage
Internal
Minimum 130 MB
External Limited by size of USB flash drive
Environmental
AC power 0 to 40°C (32 to 104°F) with no derating
Battery 0 to 40°C (32 to 104°F) at charging
–10 to +55°C (14 to 131°F) at discharging
Maximum humidity 95% RH (noncondensing)
Storage temperature –40 to +80°C (–40 to +176°F)
Shock and vibration MIL-PRF-28800F Class 2

JDSU JD724C CellAdvisor 5 MHz To 4 GHz Cable & Antenna Analyzer

Installed Options:
- 003: Bluetooth Connectivity (Using UD100A USB Adapter)

CellAdvisor JD720C analyzers are the optimal test solutions for characterizing cell-site infrastructure due to their handheld design, ease of use, and rich functionality.

Has all of the necessary measurement functions to characterize cell-site cable and antenna systems, including VSWR or return loss reflection tests, distance to fault (DTF), and cable loss.

Includes JDSU JD724-50509 Open/Short/Load, Hard Carrying Case & Accessories As Listed

JD724C JD 724C JD-724C

JDSU JD724C JD 724C Cable Antenna Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 27017

  • JDSU JD724C CellAdvisor Cable & Antenna Analyzer w/ Options (BC# 27017-L/T*)
    • 003: Bluetooth Connectivity (Using UD100A USB Adapter)
  • JDSU JD724-50509 Open/Short/Load
  • Parani UD100-G04 Bluetooth USB Adapter
  • Windi 4GB memory Stick
  • Ethernet Cable
  • (2) Antennas
  • 7/17 DIN Male To 7/16 DIN male Adapter
  • 7/16 DIN Male To N Female Adapter
  • 7/16 DIN Female To N Male Adapter
  • 7/16 DIN Male To N Male Adapter
  • 7/16 DIN Female To 7/16 DIN Female Adapter
  • Stylus
  • AC Adapter/Charger
  • Power Cord
  • RS232 PC Interface Cable
  • USB PC Interface Cable
  • Case For Unit w/ Strap
  • Hard Carrying Case