JDSU NT1055 Validator Pro Cu Copper Ethernet Network / LAN Tester

JDSU Validator Pro NT 1055 Ethernet Network Management Tool
The ValidatorPRO-NT, Cu offers a complete solution for front-line IT technicians that manage daily moves, adds, changes (MACs) and troubleshoot user connectivity issues in a wired Ethernet environment. The ValidatorPRO-NT, Cu performs tests to determine the data-carrying capabilities of copper Ethernet network cables up to 1 Gbps (1000Base-T) by detecting faults in the cabling wiring, testing for noise in the network, and ensuring that cables can support the speed capabilities of active equipment with bit error rate tests. Distance to opens and shorts help isolate the location of cable faults.

The ValidatorPRO-NT, Cu includes a comprehensive set of features for testing a network’s active network capabilities: measure Power over Ethernet (PoE) to ensure the maximum power is available on the correct pins, use port discovery to ensure the correct speed and duplex capability are advertised by the switch; connect at gigabit Ethernet and run ping tests to verify connectivity to IP hosts; discover network devices using Cisco Discovery Protocol (CDP) or Link Layer Discovery Protocol (LLDP).

ValidatorPRO-NT, Cu includes the powerful Plan-Um planning and reporting software used to plan network architectures, organize cable information, estimate cable length requirements, and document test results. Plan-Um helps set up each job, defines the scope of the job, aids in testing cable runs, and produces reports for the installer and customer. The Network Tools feature provides a quick view of the network architecture and lets users document moves, adds, and changes.

Features:

• Conducts BER testing to speed certify Ethernet data transmission speed up to 1000Base-T (1 Gbps)
• Measures SNR and skew to uncover impairments to electrical Ethernet data transmission
• Tests for opens, shorts, split pairs, miswires, and reversals and measures distance to opens and shorts—supports all copper network, telco, and coax cables
• Performs PoE load test to ensure maximum power is available from PoE source
• Performs port discovery to detect advertised Ethernet speed and displays capabilities of network devices
• Pings network devices to verify connectivity to active equipment

Applications:

• Certify speed capability of electrical Ethernet cable runs to support 10/100/1000 Mbps Ethernet applications
• Ensure configuration and connectivity with active network devices, including PoE
• Document network topology including moves, adds, and changes

Specifications:

General
Display	Color back-lit FSTN liquid crystal display (LCD)
Operating System	Linux
Keypad	Full navigations set with alphanumeric data entry and soft-key functions
Memory	Non-volatile Internal NAND flash memory Volatile 128 MByte DDR2 SDRAM memory
Languages supported (GUI)	English, French, Italian, German, Spanish, Portuguese, Korean, and Simplified Chinese
Interfaces	USB 2.0 host port (for external memory sticks)
Test Connectors	– 8-position shielded modular jack (data) – 6-position modular jack (telephone) – F-coax (video) Male connector w/sacrificial adapter
Cable Types	– Shielded or unshielded twisted pair network cable – Telephone – Coax
Cable Length
Maximum cable length	2,000 ft (600 m)
Maximum cable length for testing of split pairs	Up to 100 m (327 ft), depending upon cable type
Cable length accuracy	±5% (after performing both unit and cable calibration)
Electrical
Power sources	AC adapter; auto cigarette lighter power adapter; lithium-ion rechargeable, removable batteries
Environmental
Operating temperature	0 to 50°C (32 to 122°F) (normal operation, not charging battery) 0 to 45°C (32 to 113°F) (charging battery)
Storage temperature	–20 to 60°C (–4 to 140°F)
Operating humidity	10 to 85% RH, non-condensing
Shock and Vibration minimum	2 ft drop (free fall from stationary) on concrete
Safety	EN 61010-1
EMI/EMC	EN 61326-1:2006
Altitude	4000 m
Agency Certifications and Compliance
Main and Remote units	CE
Battery	CE
AC wall adapter	CE, PSE, UL
Auto cigarette lighter power	CE
Physical
Main Unit Size	22.9 x 11.4 x 5.3 cm (9 x 4.5 x 1.8 in)
Weight with battery	671 gm (1 lb 7.7 oz)
Remote
Size	14.2 x 11.2 x 4.4 cm (5.6 x 4.4 x 1.8 in)
Weight with battery	341 gm (12 oz)

For full JDSU Validator NT1055 product specifications, please click here: FJDSU Validator NT1055

JDSU Validator Pro-NT Cu NT1055 Copper Ethernet Network / LAN Cable Tester

This Is A Brand NEW Kit In Perfect Condition, Never Used. All Manufacturer Packaging Is Intact

Conducts BER testing to speed certify Ethernet data transmission speed up to 1000Base-T (1 Gbps)

Includes Carrying Case & Accessories As Listed

NT-1055 Validator-NT Cu 1055 NT1055 NT-1055

JDSU NT1055 NT-1055 Copper Ethernet Network Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 5987A-L/T* 5987B-L/T*

• JDSU NT1055 Validator Pro Cu Main Unit (B# 5987A-L/T*)
• JDSU NT1055 Validator Pro Cu Remote Unit (BC# 5987B-L/T*)
• JDSU Remote ID's # 1-8
• (2) Ethernet Cables
• (2) TP74 Sacraficial Cables
• Validator Pro 21146579 REV 004 Software
• (2) Battery Packs
• (2) AC Adapter/Chargers w/ (8) Adapters
• DC Car Charger
• Carrying Case w/ Strap

Having trouble viewing this file? Click this link to download