Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image Network Testers Small Arrow JDSU Small Arrow LANScaper Series Small Arrow NT750

  Click Here
To View Our Return Policy
Corner Image Corner Image

1N08 - JDSU Test-Um NT700 LanScaper Network Cable Tester

Test-Um JDSU LanScaper NT700  Network & Cable Tester Kit

 The LanScaper provides full cabling testing, displaying wire map, ID, and faults, including shorts, opens, miswires, split pairs, and reverses

Includes Original Factory Box & Accessories As Listed

NT-700 NT 700

JDSU NT700 NT-700 LanScaper Network And Cable Tester Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.


Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
Condition Brand NEW
Warranty 90 Day Exchange
  • JDSU NT700 LanScaper Network & Cable Tester
  • JDSU Cable Test Remote
  • (2) JDSU One Foot Patch Cables
  • (2) JDSU RJ45 To Alligator Clip Cables
  • (2) JDSU No Fault RJ12 Cables
  • JDSU LanScaper Network Tester User's Guide
  • Case For Unit
  • Original Factory Box
Corner Image Table Bottom Corner Image
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image
 JDSU LanScaper NT700 Kit

The LanScaper™ is a jack identifier, cable tester, length measurement device, and ping tester in one unit.

The easy-to-use LanScaper enables quick identification at unknown RJ45 jacks for active Ethernet, POTS, Token Ring, or other devices. It pings network devices to verify connections and IP addresses, automatically accessing DHCP hosts to obtain network information.The LanScaper can quickly identify hubs, NICs, or auto MDI/MDI-X devices and conduct link tests to identify speed and capabilities of network drops.

For cable testing, the LanScaper provides full cabling testing, displaying wire map, ID, and faults, including shorts, opens,miswires, split pairs, and reverses.The fullfeatured LanScaper also measures cable length and generates tone levels for signal tracing and cable identification on all pairs, a selected pair, or a selected pin.

  • Detects and reports speed and capabilities for active Ethernet and other devices up to 100 Mb/s
  • Pinging function verifies connectivity to network devices
  • Blinks link indicator to identify cable termination on active ports
  • Identifies hubs, NICs or auto MDI/MDI-x devices
  • Tests cabling configuration and verifies connectivity while conducting tests for opens, shorts, miswires, split pairs, and reverses
  • Displays length measurement for each pair in feet or meters
  • Generates selectable tones on selected pins for use with tone tracers

Battery life Times are for the full capacity of the battery used continuously
 in one of the following modes
Standby mode 2.5 Years
Cable testing mode 50 hrs(nobacklight)
14 hrs(50% backlight)
Network testing mode 15 hrs(no backlight)
14 hrs(50% backlight)
Cable types
Shielded or unshielded, CAT3,CAT4,CAT5,CAT5E, and coax
Minimum cable length
for testing for split pairs

1m (3ft)
Minimum cable length
for single-ended cable test
1.25m (4ft)
Length measurement range

0 to 457m (0 to 1,500 ft)
Operating temperature 0 to 50°C  (32 to 122°F)
Storage temperature 30 to 80°C (20 to 176°F)
Humidity 10 to 90%, non-condensing
Length 15cm (5.9in)
Width 7.4cm (2.9in)
Height 3.2cm (1.25in)
Weight(with battery) 200g (7oz)

For full JDSU Validator NT700 product specifications, please click here: JDSU Validator NT700
Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright 2003- | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter