JDSU OLS-35 SM Source w/ FBP Fiberscope & MP-60 PM
Condition: Refurbished
Warranty: 90 Day Exchange
The JDSU OLS-3x series is the new generation of small and rugged optical light sources for quick, easy and convenient field insertion loss measurement and continuity check.
All JDSU sources are equipped with Auto- ? and Multi- ? functions compatible with any JDSU power meters. This one button operation provides a quick, simple and error-free testing solution, which makes SmartPocket? sources the ideal tool for daily field testing.
The optical light sources (OLS-3x) of the SmartPocket? series provide the ideal complement tools to the OLP-3x for insertion loss and continuity testing in both multimode and singlemode optical fiber networks. They offer a dedicated and costoptimized solution for testing and troubleshooting optical fibers in the field.
- The OLS-35 covers all standard singlemode telecommunication network applications with 1310/1550 nm
Features:
- Cost-effective, rugged and compact solution
- Interchangeable connectors for maximum flexibility available
- Auto ? and TwinTest transmission modes
Applications:
- Link insertion loss measurements and continuity check
- Standard singlemode wavelengths for any telecom, CATV and military applications.
Specifications:
Source Type | Laser |
Laser Safety | IEC 60825-1: 2007 |
Fiber Type | SM (9/125 µm) |
Optical Interface Type | PC/ 1 single port for all wavelengths |
Optical Interface Connectors | Fixed: LC, FC, SC Interchangeable LC, FC, SC, ST, DIN |
Central Wavelength | 1310 nm (± 20 nm) 1550 nm (± 20 nm) |
Spectral Width *1* | <5 nm |
Output Power | -7 dBm |
Stability Short Term (15 Min) *3* | ± 0.02 dB |
Stability Long Term (8h) *3* | ± 0.05 dB |
Tone Generation | 270 Hz, 1 kHz, 2 kHz |
Auto ? mode *4* | Yes |
Multi ? mode *4* | Yes (2 ?s) |
*2.* Into a 50/125 µm fiber
*3.* After 20 minutes warm-up time, at ambient tempeature range -10°C to +55°C, ?T = ± 0.3 K
*4.* With JDSU Power meters
Power supply | |
Dry batteries | 2x Mignon (AA) 1.5 V |
Rechargeable batteries | 2x Mignon (AA) NiMH 1.2 V |
AC operation | via micro USB and SNT-505 |
Battery life (CW) | 30 h (MM)/80 h (SM) Automatic power off after 20 minutes |
Environmental conditions | |
EMI/ESD | CE compliance |
Electrical safety | EN 61010-1: 2002 |
Recommended calibration interval | 3 years |
Operating temperature | -10 to +60°C / +14 to +140°F |
Storage temperature | -40 to +70°C/ -40 to +158 °F |
Dimensions (H x W x D) | 30 x 80 x 150 mm / 1.2 x 3.1 x 5.9? |
Weight | 200 g / 0.45 lb |
JDSU Westover FBP Probe Microscope
The JDSU Westover FBP-series video probe microscopes provide the ultimate fiber inspection tool. The key components of the probe include an integrated light source, a 1/3-inch complementary metal oxide semiconductor (CMOS) video camera, a focusing mechanism, a single- or dual-magnification (200/400X) control, and an image capture button. It is powered through the universal serial bus (USB) port and uses a blue coaxial light emitting diode (LED) light source with an advanced camera system to produce the highest resolution possible. It fits and operates comfortably and easily in-hand, letting users inspect hard-to-reach connectors that are installed on backside of patch panels or inside optical devices. The focus control is conveniently located on the probe to easily adjust the focus of the fiber image, while the dualmagnification control lets users quickly change between high- and low-magnification views. The probe offers a built-in QuickCapture? button to instantly capture the fiber end face image on the display, which complements its use with JDSU optical test units.
FBPT Inspection Tips and Adapters
The JDSU interchangeable precision stainless-steel inspection tips enable inspection of every connector type located in bulkheads and patch cords. Their careful design and engineering enables consistent and accurate inspection of fiber, and their unique optics architecture provides true versatility and adaptability for inspecting every connector and application in your network. With over 250 individual tips and adapters specifically engineered for the FBP probe line, JDSU offers the industry?s most comprehensive fiber inspection solutions.
The patented JDSU RibbonDrive specialty tips let users inspect high-density, mult-fiber array connectors mounted within a bulkhead adapter. A precision-keyed mating adapter interface secures each mated tip with its connector. The patented panning knobs let users view each fiber individually in both the X- and Y-AXIS.
Features:
- Ergonomic design and controls for easy one-hand operation
- Unique optics architecture and comprehensive selection of precision inspection tips and adapters for inspecting every connector and application
- Patented RibbonDrive inspection tips for inspecting both X- and Y-axis of multi-fiber/ribbon array
- Compatible with a full range of display devices or USB analog-to-digital converter for use with T-BERD/MTS platforms or PC/laptop
- Coaxial illumination provides crisp, clear view of fiber end face conditions
Applications:
- Inspect both the bulkhead (female) and patch cord (male) sides of fiber interconnect as well as optical devices located in hard-to-reach places (transceivers)
- Inspect both simplex and ribbon (multi-fiber) connectors
- Use with a comprehensive selection of precision FBPT tips and adapters to inspect every connector and application
Specifications:
Dimensions | 46 x 43 x 140 mm (1.8 x 1.7 x 5.5 in) |
Weight | 180 g (6.35 oz) |
Optical magnification | 200X, 400X or 200/400X |
Connector type | 4- or 6-pin Hirose |
Camera type | 1/3-in CMOS |
Light source | Blue LED, internal to probe, 100,000+ hours |
Lighting technique | Coaxial |
Focus control | Adjustable, in-probe |
Power source | Display device, USB port |
Horizontal field-of-view (FOV) (200X) | 550 µm |
Horizontal FOV (400X) | 350 µm |
JDSU MP-60 Mini Power Meter
Miniature USB Power Meter
The new MP-series power meter is a miniature device that measures optical power via a USB 2.0 connection to a PC/laptop. This unique device makes digital processing of optical power measurements possible and integrates directly with JDSU FiberChek Pro software, the industry-leading automated fiber inspection and analysis program. Its size, functionality, and ease-of-use makes it an extremely useful and practical tool when testing optical power levels. The simple, straightforward, and intuitive software interface offers a well-organized digital solution to both fiber inspection and test procedures.
Features:
- Lightweight, small form-factor design for ultimate portability
- Generates measurements in dB, mW, and dBm with auto-voice readout option
- Compatible with FiberChek Pro fiber inspection and analysis software; integrated reporting capabilities within FiberChek Pro
- Simple, accurate, and instant push-button measurement results can be electronically archived, logged, and printed
- Dedicated for all single-mode and multimode applications including LAN, telecom, CATV, and DWDM testing
- Automated data-logging capabilities
- Automatic wavelength detection
Applications:
- Takes power measurements for all single-mode and multimode connectors via a USB 2.0 connection to a PC/laptop
- Measures optical power with multiple pre-calibrated wavelengths: 850, 1300, 1310, 1490, and 1550 nm
- Integrates digital power measurements, fiber inspection, and analysis into a single, unified work sequence
Specifications:
Dimensions | 86 x 25 x 19 mm (3.4 x 1.0 x 0.8 in) |
Weight | 14 g (0.5 oz) |
USB type | USB 2.0 |
Connector input | Universal 2.5 and 1.25 mm connectors |
Measurement types | dB, mW, dBm |
Detector type | Germanium |
Power source | USB port on PC or laptop |
Display range | ?65 to +10 dBm |
Max. permitted input level | +13 dBm |
Intrinsic uncertainty | ±0.20 dB (±5%) |
Linearity (?50 to +5 dBm) | ±0.06 dB |
Standard wavelength settings | 850, 980, 1300, 1310, 1490, 1550, 1625 nm |
Wavelength range | 780 to 1650 nm |
Wavelength and modulation | 270 Hz, 330 Hz, 1 kHz, 2 kHz |
1300, 1310, 1490, 1550, 1625 nm | ?50 to +10 dBm |
850, 980 nm | ?45 to +10 dBm |
For full JDSU OLS-35 product specifications, please click here: JDSU OLS-35 For full JDSU MP-60 product specifications, please click here: JDSU MP-60
JDSU OLS-35 Smartpocket SingleMode 1310 / 1550nm Fiber Optic Laser Light Source w/
Westover USB FBP Fiberscope Probe w/ FiberChek Pro Software & MP-60 USB Power Meter
Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
The OLS-35 covers all standard singlemode telecommunication network applications with 1310 / 1550 nm
Includes Carrying Case & Accessories As Listed
MP 60 MP60 OLS 35 OLS35
JDSU OLS-35 OLS35 SM Fiber Light Source Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 18187 15764M 15765M
- JDSU OLS-35 SingleMode Fiber Optic Laser Light Source (BC# 18187)
- SM Source:
- 1310nm
- 1550nm
- LC Connector For Source
- SM Source:
- JDSU Westover FBP Fiberscope Probe (BC# 15765M)
- JDSU MP-60 USB Power Meter (BC# 15764M)
- Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1490nm
- 1550nm
- Power Meter:
- JDSU USB Extension
- FBPT-U12-A6 Probe Connector
- FBPT-LC Probe Connector
- FBPT-U12M Probe Connector
- FBPT-SC Probe Connector
- FBPT-U25M Connector
- Connector Case
- (2) FIS LC Loopback Modules
- (2) SM LC-LC Fiber Cables
- FiberChek Pro Software
- Hard Copy User Manual
- Case For OLS-35 Unit
- Carrying Case