JDSU Test-Um TP650 Testifier PRO All Cable Tester
Condition: Refurbished
Warranty: 90 Day Exchange
TestifierPRO
Key Features
- Identifies cable termination on active ports by blinking port LED
- Measures cable length using patented cable capacitance method
- Displays single-ended test results in wiremap format for opens, shorts, and split pairs
- Tests and displays in wiremap format shorts, opens, miswires, reversals, and split pairs with remotes
- Two-line, 16-character, back-lit, full alphanumeric LCD with icon flags
- Auto-off and timed backlight in any mode for low power consumption and long battery life
The TestifierPROル Cable Tester provides telecom, datacom, and cable installers and technicians with cable test, length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO cable tester requires one-button operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax. An integrated remote bay houses a detachable test remote with built-in jacks for testing twisted pair cable terminated with RJ11 or RJ45 connectors.
The field-proven TestifierPRO performs detailed analysis to detect miswire, no connection, short, high-resistance fault, and split pair conditions when used with remote identifiers. It also tests and reports on shorts, opens, and split pairs conducted without a remote. The MAP ID function identifies multiple cables by displaying ID numbers of map-only remotes. TestifierPRO cable tester measures cable length and displays PASS icon for correctly wired T568A/B and six-pin cable. Tone generator mode sends any of four user-selectable tones on all pin and pair combinations.
Applications
- Installation, troubleshooting, and maintenance on telco, network, or coax cable
- Identify switch port LED where network cable is terminated
- Measure cable length
- Determine wiring condition
- Identify up to 20 telco, network, or coax cable runs at a time
- Find and fix position of exposed or hidden cable
Specifications
Physical | |
Size | |
Excluding F-connector | 3.3 x 6.7 x 15.7 cm (1.3 x 2.6 x 6.2 in) |
Including F-connector | 3.3 x 6.7 x 16.8 cm (1.3 x 2.6 x 6.6 in) |
Weight | 235.3 g (8.3 oz) with battery and remote |
Environmental | |
Operating temperature | 0 to 50° C (32 to 122° F) |
Storage temperature | ヨ10 to 60° C (14 to 140° F) |
Humidity | 10 to 90%, non-condensing |
Electrical | Battery life (based on a typical 9 V Alkaline battery) is for the full capacity of the battery used continuously in one of the following modes (battery not included): ヨ Standby 2.5 yrs ヨ Cable testing 80 hrs (with backlight off) |
General | |
Cable Types | Shielded or unshielded twisted pair and coax |
MinimumCable Length for Testing for Split Pairs | 0.91 m (3 ft) |
MinimumCable Length for PRETEST | 1.22 m (4 ft) |
LengthMeasurement Range | CAT5/6 0 to 610 meters (0 to 2,000 feet) |
Coax Cable | 100Omaximum DC resistance, center conductor plus shield |
For full JDSU TP650 product specifications, please click here: JDSU TP650
JDSU Testifier PRO TP-650 All-Cable Tester
Ideal for installation, troubleshooting, and maintenance on telco, network, or coax cable!
Identify up to 20 telco, network, or coax cable runs at a time
Cable test, length measurement, and hub blink functions in one unit.
Includes Original Factory Case And Accessories As Listed!
TP 650
JDSU TP650 TP-650 Testifier Pro All Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- JDSU Testifier PRO TP650 Cable Tester (BC# 11371)
- JDSU Testifier PRO Remote
- (2) Cat 5e Patch Cables
- RJ45 To Dual Clip Cable
- Cable Identifier
- Hard Copy User Manual
- Case For Unit
- Original Factory Case