Wavetek SDA-5000 CLI-1450 kit with accessories

Wavetek JDSU Acterna SDA-5000 & 3 CLI-1450 Meters

Wavetek JDSU Acterna SDA-5000 & CLI-1750 Meters

$1,795.00
Availability: In stock
SKU
1A68

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

SDA-5000

Installed Options:
  • Reverse Sweep


The SDA-5000 is used for HFC network testing and deployment of digital video, data, and traditional analog services. It is part of a system sweep solution. The SDA-5000 is a small, lightweight hand-held field CATV Sweep Analyzer for diagnosing and eliminating problems quickly in CATV system equipment. Ideal for aligning amplifiers, testing performance of both forward and reverse path networks, finding and fixing sources of reverse path ingress, measuring signal quality, and fulfilling FCC and CENELEC proof-of-performance requirements.



  Highlights:
  • Qualifies the network for today's high-growth subscriber services.
  • Reduces technician time for the most labor intensive maintenance and troubleshooting.
  • Advanced QAM analysis for 64, 128, and 256 QAM (optional).
  • Spectrum display from 5 to 1,000 MHz with cable modem analysis (Zero Span mode).
  • Totally non-interfering sweep, specifically for 64, 128, and 256 QAM digital channels.

  Applications:
  • Non-interfering, continuously referenced sweep.
  • Cable modem analysis using Zero Span mode.
  • Full in-service, proof-of-performance analyzer.
  • QAM View option provides complete analysis of digital TV and forward cable modem signals.
  • Find ingress fast with Field View option. Cable technicians working in the field can see the reverse path at the headend.
  Key Features:
  • Forward and reverse sweep in one handheld instrument.
  • QAM View includes BER, MER, and constellation.
  • Equalizer stress and microreflections.
  • QAM ingress (noise-under-carrier).
  • New graphical test point compensation for easier setup.

CLI-1750

Extensive testing shows that one of the main challenges to successfully offering new, digitally based services is the existing wiring in the customers home. Digital services, including audio, video, Internet, and telephony are less tolerant than traditional analog services of frequency response problems, reflections, group delay, and ingress caused by inferior componetry or poor craftsmanship. Will the existing wiring deliver the quality the customer demands? Should the network provider or homeowner plan to rewire when digital services are activated? You need tools to help answer these questions quickly and accurately because replacing wiring makes new service activation costs high, often limiting the acceptance of new services.

The Acterna CLI-1750, used in conjunction with the Model LST-1700 Signal Transmitter, helps identify and locate potential problems with the distribution network and home wiring prior to activating these new services. The Wavetek / Acterna CLI-1750 and Acterna / JDSU LST-1700 are compact home wiring testers capable of measuring not only routine power levels, but also digital average power, leakage,frequency domain reflectometry (FDR), and sweep, which can be useful for a wide range of trouble shooting from installation to characterizing existing wire. The instruments superior user interface and performance can reduce the installation time and repair cost.

Highlights:

  • Complete solution for installers eliminating the need for multiple meters or testers.
  • Combination signal level meter, leakage meter, and home wiring tester.
  • Easy-to-use, portable, and economical.
  • Comprehensive tests to verify the quality of an installation.
  • Icon-based user interface for ease of operation in all languages.

Applications:

  • Signal levels are checked to verify proper levels arriving at the tap and at the house.
  • Frequency response is measured to verify proper losses and to uncover any roll-off or sharp changes in response.
  • Frequency Domain Reflectometry test (FDR) reveals precise location of sources of reflections and degree of severity.
  • Reverse Ingress Scan test shows the presence of noise, or ingress, generated in the house that hampers reverse communication for all customers sharing the node.
  • Leakage test finds potential points of ingress, as the source may not be in operation while the installer is at the house.

Features:

  • Signal Scan mode shows all channel levels at once.
  • DigiCheck(TM) digital signal average power measurement option.
  • Sweep and FDR mode finds cable, component, and craftsmanship-related faults.
  • Frequency agile leakage detection and measurement.
  • Pass/fail check ensures FCC compliance and reduces subscriber call-backs.

CLI-1750 Specifications

Frequency

Range 5 to 890 MHz
Accuracy 10 ppm @ 25C (77F)
20 ppm over temp
Tuning Resolution 25 kHz

Level Measurement

Range -20 to +50 dBmV
Resolution 0.1 dB
Accuracy 0.75 dB Flatness,
0.75 dB Linearity @ 25C (77F)
Digital Average Power (optional) 2.0 dB (typical)

Scan Mode

Number of Channels 120
Scan Rate

Approximately 6 carriers/second


Leakage Mode

Level Measurement
Input Sensitivity (with HD-1 dipole or VMA-3 mag mount)
Video Detection From 1 V with LT1000
Leakage Tagger activated
(121 to 133.2625 MHz).
CW Detection From 0.5 V typical with LT1000
Leakage Tagger activated
(121 to 133.2625 MHz).
Measurement From 1.4 V (115 to 140 MHz).
Range 0.5 to 2,000 V (at input connector)
Accuracy
Measurement 1.5 dB @ 25C (77F)
Find & Fix 2.25 dB @ 25C (77F)
Tuning Carrier
Frequency Range 115 to 140 MHz range (Video)
Accuracy 10 ppm @ 25C (77F);
20 ppm over temp
Resolution 25 kHz
Tagger modulation for leakage Modulation frequency
5 to 25 Hz

Operating

Temp. Range -10 to +50C (14 to 122F);
3 dB drift, -10 to +50C
Water Resistance Meets or exceeds MIL-STD-810D
(Method 506.2)



For full Wavetek SDA-5000 CLI-1750 product specifications, please click here: Wavetek SDA-5000 CLI-1750

WAVETEK SDA-5000 Digital Analyzer
&
WAVETEK CLI-1750 Combination Signal Level / Leakage Meter

SDA-5000 Installed Options:
Reverse Sweep

Acterna CLI-1750 & SDA-5000 CLI1750 SDA5000 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

  • Wavetek JDSU Acterna SDA-5000 CATV Meter
    • Option 1: Reverse Sweep
  • SDA-5000 Battery Pack
  • SDA-5000 AC Adapter/Charger
  • SDA-5000 Power Cord
  • SDA-5000 User Manual On CD-ROM
  • SDA-5000 Getting Started Guide On CD-ROM
  • Carrying Case For SDA-5000 w/ Strap

 

  • Wavetek CLI-1750
  • CLI-1750 Battery Pack
  • CLI-1750 AC Adapter/Charger
  • CLI-1750 User Manual On CD-ROM
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!