Jilong KL-195 Fiber Fusion Splicer w/ Cleaver
$0.00
Availability:
Out of stock
SKU
2J11
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Request a Quote for
The Jilong KL-195 is a single fiber fixed v-groove cladding alignment fusion splicer capable of splicing singlemode & multimode fibers.
Specifications
Applicable Fibers |
SM MM DS NZDS |
Fiber Cleaved Lengtd | 8-16mm (Coating Diameter: 250µm) |
Fiber Diameter | Cladding Diameter: 80~150µm Coating Diameter: 100~1000µm |
Fiber Count | Single |
Splicing Mode | Auto |
Fiber Alignment Metdod | Cladding Alignment With Fixed V-groove |
Image Processing Metdod | Digital |
Actual Average Fiber Splice Loss | 0.05dB(SM), 0.03dB(MM) 0.08dB(DS), 0.08dB(NZDS) |
Typical Splicing Time | 9 Sec (Standard SM Fiber) |
Splicing Mode | 53(Templet), 40(User) |
Splice Loss Estimate | Available |
Return Loss | >60dB |
Storage Of Splice Result | 4000 Results, 20 Parameter Per Result |
Fiber Magnification | 125X (X And Y View) |
Tube TypicalHeating Time | 30 Sec |
Tube Heating Time | 9(Templet), 24(User) |
Tube Heating Temperature | Can Be Adjusted |
Applicable Protections Sleeve Length | 60mm, 40mm And A Series Of Micro Sleeves |
Tension Test | 2N |
Electrode Life | 2500 |
No. Of Splice/Heating With Battery | Typical 160 Cycles (Splice/Tube Heat With Inner Li-Battery) |
Viewing Method | 5.6 Inch TFT Color Monitor Two CMOS Cameras |
Image Change Over | The Fiber Image Is Turned Upside Down |
Terminals | USB 1.1 And VGA Software Upgrade Via USB |
Operating Condition | 0~5000m Above Sea Level 0-95%RH and 10~50° Respectively Max Wind Velocity of 15M/s |
Power Supply | AC100~240V With AC Adapter Inner Li-Battery (6600mAH) |
Dimensions | 150mm(L)x150mm(W)x150mm(H) |
Weight | 2.6Kg Excluding Battery 3.1Kg Including Battery |
Splicing Mode | Auto, Calibrate, Normal, Special |
Fiber Cleaved Angel Threshold Set | 0.1 ~ 10.0°, 0.1° Step |
Display Fiber Cleaved Angel | Available |
Display Fiber Offset Angel | Available |
Auto Detect Cleaved Endface Fault | Available |
Display Core Offset | Available |
Display Clad Offset | Available |
Arc Strength Automatic Adjustment | Available |
Display Inside Temperature | Available |
Display Ambient Temerature |
Available |
Display Heater Temperature | Available |
Display Air Pressure | Available |
Display Battery Voltage | Available |
Sleep | Available |
Auto Shut Down | Available |
Jilong KL-195 Singlemode & Multimode Fiber Fusion Splicer
This Unit Is In Like New Condition And Has A Low Splice Count Of Only 128!!
Includes Attached Heat Shrink Oven, KL-21B High Precision Fiber Cleaver, Hard Carrying Case w/ Strap & Accessories As Listed!!
Jilong KL195 KL-195 Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Jilong KL-195 Fusion Splicer
- KL-21B High Precision Fiber Cleaver w/ Hard Case
- Clauss CFS-2?Fiber Optic Stripper
- 250 Single Fiber Holder Set
- V-Groove?Brush
- Tweezers
- (20) Fiber Protection Sleeves?
- Spare Electrode Set
- Cooling Tray
- Protective Screen Cover??
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- User Manual On CD-ROM
- Hard Carrying Case w/ Strap