Jilong KL-300T Fusion Splicer Tool Kit Cleaver New
Condition: New / Calibrated
Warranty: 1 Year Exchange
The KL-300T Core Alignment fiber optic fusion splicer made by Jilong Communication is a solid reliable addition to any Technicianﾒs tooling. In side by side specification comparisons the KL comes up first in more categories than the big three, Fujikura, Sumitomo or Fitel. The 300 triumphs in attributes like a 39 second splice/shrink cycle time, the second highest magnification on the market and lighter weight than all other standard fusion splicers.
But the KL-300T stands out even more with features that canﾒt be weighed & measured and put into a chart. Each and every time you interact with this machine you will appreciate features like a lighted fusion area, the largest screen on the market, a high resolution graphical user interface, easy to interpret universal buttons and frustration free menu navigation. Additionally when you see the video from the high resolution cameras youﾒll know youﾒve got a machine that will spoil you.
Features:
- Core to core alignment by PAS technology
- ( PAS:Profile Alignment System)
- Digital fusion splicer with automatic focus function
- Fiber core can be display clearly
- Single X or Y view and X & Y view simultaneously
- Auto detect cleaved endface fault
- Display fiber cleaved and offset angle
- Display core and clad offset
- 5.6 inch TFT color LCD monitor with clear digital image display
- USB & VGA interface
- Software upgrade via USB interface
Specifications:
| Applicable fibers | SM MM DS NZDS |
| Fiber diameter | Cladding diameter:80-150µm; Coating diameter:100-1000µm |
| Fiber count | Single |
| Fiber cleaved length | 12-16mm (Coating diameter:250µm) |
| Actual average splice loss | 0.02dB(SM), 0.01dB(MM), 0.04dB(DS), 0.04dB(NZDS) |
| Typical splicing time | Typical 9 sec (standard SM fiber) |
| Return loss | >60dB |
| Splicing mode | Auto Calibrate Normal Special |
| Fiber aligning method | Meticulous?Core?Clad?Manual |
| Splicing program | 53 (templet), 40(user) |
| Tube heating program | 9 (templet),24(user) |
| Tube typical heating time | Typical 30 sec |
| Protection sleeve length | 60mm, 40mm |
| Storage of splice result | 4000 results, 20 parameter per result |
| Fiber image magnification | 300X (X or Y view),150X (X and Y view) |
| Battery capacity | Typical 160 cycles (splice/tube heat with inner Li-battery) |
| Monitor | 5.7 inch color LCD monitor |
| Tension test | 2N |
| Electrode life | 2500 |
| Terminal | USB |
| Power supply | AC 100-240V with AC adapter Inner Li-battery (7800mAH) DC 13.5V |
| Operating condition | 0-5000m above sea level, -10-50? Max wind velocity of 15m/s |
| Dimension | 150mm(L)×150mm(W)×150mm(H) |
| Weight | 2.55Kg excluding battery,3.05Kg including battery |
| Display fiber cleaved angle | ﾕ |
| Display fiber offset angle | ﾕ |
| Display core & clad offset | ﾕ |
| Fiber angle limit | ﾕ |
| Air pressure auto compensation | - |
| Real-time arc calibration | - |
| Display inside temperature | ﾕ |
| Display ambient temperature | ﾕ |
| Display heater temperature | ﾕ |
| Display air pressure | ﾕ |
| Display battery voltage | ﾕ |
| Image turn over | ﾕ |
| Taper splice | ﾕ |
| Sleep | ﾕ |
| Auto shut down | ﾕ |
| Software upgrade via USB | ﾕ |
Jilong KL-08C Fiber Optical Tool Kit
- Fiber coat stripper For Peeling the coat of fiber
- Transverse fiber reamer For Transverse peeling fiber cable
- Assembled screwdriver For Tightening the bolts
- Mini screwdriver For Tightening the screws
- Monkey wrench For Tightening the bolts
- Paper knife For Cutting
- Piano wire clamp For Cutting powerful core of fiber cable
- Steel wire clamp For Accessorial tool for peeling cable
- Diabonal cutting pliers For Accessorial tool for peeling cable
- Acuate clamp For Accessorial tool for peeling cable
- Alcohol pump bottle For Store alcohol
- Bundle clamp For Peeling the bundle
- Head lamp For Using at night
- Tapeline For Counting the length of cable
- Nipper For Coiling fiber
- Scissors For Cutting fiber
- Mark pen For Marking
- Cleaning air ball For Cleaning the lens of fusion splicer
For full Jilong KL-300T product specifications, please click here: Jilong KL-300T
This Fusion Splicer & Tool Kit Are Brand New, Includes 1 Year Warranty!!
This Unit Is Comparable To The Fujikura FSM-50S
Includes Attached Heat Shrink Oven, Fiber Cleaver, Custom Hard Case & Accessories As Listed!
Jilong KL300T KL-08C KL-300T KL 08C Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Jilong KL-300T Fusion Splicer
- KL-21B High Precision fiber cleaver
- Fiber Cleaver Carrying Case
- CFS-2 fiber stripper
- Jilong KL-08C Fiber Optical Tool Kit
- CFS-2 Fiber coat stripper
- TC-105C Transverse fiber reamer
- FM-LH Assembled screwdriver
- 1200 Mini screwdriver
- 1208 Monkey wrench
- LC-620 Paper knife
- C-C08 Piano wire clamp
- KD-106 Steel wire clamp
- KD-426 Diabonal cutting pliers
- KD-216C Acuate clamp
- CT-40 Alcohol pump bottle
- 8PK-3002 Bundle clamp
- ZF2402 Head lamp
- L16-35 Tapeline
- TS-02 Nipper
- Scissors
- Mark pen
- Cleaning air ball
- Internal rechargeable Li battery
- AC adaptor
- AC Power cord
- USB Download Cable
- Custom Hard Carrying Case
- Spare electrodes
- Cooling tray
- Cleaning tools
- Operating manual
