Nicollet Technologies DigiSmart 4200-RT Test Set
$995.00
Availability:
Out of stock
SKU
KE06
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Request a Quote for
Nicollet Technologies DigiSmart 4200-RT Test Set
The DigiSmart™ 4100-RT is a trunk tester so versatile and so comprehensive, it has been awarded a U.S. patent recognizing its uniqueness. It packs the power to test both ends of a circuit into a handheld unit that the technician can take to every job.
Add MF digit capabilities to the 4100-RT and you have the 4200-RT model. Affordably priced, both models are an industry best buy.
Five signaling modes are available at the touch of a button:
Other features include:
For full Nicollet Technologies DigiSmart 4200-RT product specifications, please click here: Nicollet Technologies DigiSmart 4200-RT
The DigiSmart™ 4100-RT is a trunk tester so versatile and so comprehensive, it has been awarded a U.S. patent recognizing its uniqueness. It packs the power to test both ends of a circuit into a handheld unit that the technician can take to every job.
Add MF digit capabilities to the 4100-RT and you have the 4200-RT model. Affordably priced, both models are an industry best buy.
Five signaling modes are available at the touch of a button:
- C/O Immediate Start -> DOD
- C/O wink Start -> DOD
- PBX Immediate Start -> DID
- PBX Wink Start -> DID
- Normal Loop -> POTS
Other features include:
- BRIDGE OR TERMINATE CIRCUIT
- 600 OR 900 OHM IMPEDANCE
- 1004Hz TONE SOURCE
- WINK TIMING ANALYSIS DISPLAYED
- 11 STANDARD CALL PROGRESS TONES
- VISUAL DISPLAY OF STATUS MESSAGES
- BANTAM AND MODULAR TEST JACKS
- SPEAKER FOR AUDIBLE MONITORING
- RUGGED RELIABLE CONSTRUCTION
| Display | Alphanumeric LCD 4 lines, 16 char/line 32 digits maximum |
| Speaker | 1.5 inch round volume control internal mount |
| DTMF/Dual-Tone Multi-Frequency | |
| TRANSMIT (Store, Send & Repeat) | |
| Tone Duration | 50 msec |
| Interdigit Duration | 50 msec |
| Transmit Rate | 10 digits/second |
| Level: Low/High Group | -6 / -3 dBm +/- 2 dB |
| RECEIVE | |
| Tone Duration (min) | 35 msec |
| Interdigit Duration (min) | 35 msec |
| Receive Rate (max) | 14 digits/sec |
| Sensitivity Range | 0 to -30 dBm |
| Twist (maximum) | 10 dB |
| Dial Pulse | |
| TRANSMIT (Store. Send & Repeat) | |
| Pulse Rate | 10 pulses/second |
| Percent Break | 67% |
| Interdigit Period | 800 msec |
| RECEIVE | |
| Pulse Rate (min / max) | 8 to 16 pulses/sec |
| Percent Break (min / max) | 35% / 80% |
| Interdigit Period (minimum) | 160 msec |
| MF/Multi-Frequency | |
| TRANSMIT (Store, Send & Repeat) | |
| KP Tone Duration | 100 msec |
| Duration of all other tones | 70 msec |
| Interdigit Period | 70 msec |
| Tone Level (each tone) | -6 dBm +/- 1 dB |
| RECEIVE | |
| Sensitivity Range | 0 to -25 dBm |
| KP Tone Duration (min) | 60 msec |
| Duration of all other tones | 40 msec |
| Interdigit Duration (min) | 40 msec |
| Twist (maximum) | 6 dB |
| Tone Source | |
| Frequency | 1004 Hz +/- 2 Hz |
| Level into 900 ohms | 0 dBm +/- 0.2 dB |
| Level into 600 ohms | 2 dBm +/- 0.5 dB |
| Call Progress Tones | |
| Frequencies (single or dual) | 350, 440, 480, 620 Hz |
| Transmit Level (each tone) | -10 dBm nominal |
| Transmit Level (each tone) | -10 dBm nominal |
| Frequency Accuracy | +/- 0.75% |
| Timing Accuracy | +/- 2.5% of nominal |
| TONE NAME | FREQ. |
| 1 Dial Tone | FREQ. 1 350 Hz FREQ. 2 440 Hz |
| 2 Reorder | FREQ. 1 480 Hz FREQ. 2 620 Hz |
| 3 Busy | FREQ. 1 480 Hz FREQ. 2 620 Hz |
| 4 Audible Ring | FREQ. 1 440 Hz FREQ. 2 480 Hz |
| 5 Recall Dial | FREQ. 1 350 Hz FREQ. 2 440 Hz |
| 6 Special AR | FREQ. 1 440 Hz FREQ. 2 480 Hz |
| 7 Intercept | FREQ. 1 440 Hz FREQ. 2 620 Hz |
| 8 Call Waiting | FREQ. 1 440 Hz |
| 9 Busy Verification | FREQ. 1 440 Hz |
| 0 Executive Override | FREQ. 1 440 Hz |
| * Confirmation | FREQ. 1 350 Hz FREQ. 2 440 Hz |
| DID Parameters | |
| Line Resistance | 1700 ohms maximum |
| Wink Type | Reverse Battery |
| Off-Hook/Wink Delay | 100 msec nominal |
| Wink Duration | 200 msec nominal |
| Receive Inhibit Period | 30 msec nominal |
| Normal Battery Voltage | -48 VDC nominal |
| Reverse Battery Voltage | 48 VDC nominal |
| Battery Source Resistance | Balanced 220 ohms |
| Current | Current limited to 70 ma |
| Wink Timing Analysis | |
| C/O WINK START MODE | |
| Pre-Wink Interval | 10 to 999 msec |
| Wink Duration | 100 to 290 msec |
| PBX WINK START MODE | |
| Post Wink Interval | 0 to 999 msec |
| Analysis Resolution | 1 msec |
| Analysis Accuracy | +/-2 msec |
| Power Requirements | |
| AC Adapter | Class B transformer, 8 ft. cord |
| Input Voltage | 120 VAC, 60 Hz |
| Output Voltages | + 15 and -60 VDC |
| Dimensions / Weight | |
| Instrument | 2.9 x 4.2 x 8.1 inches (7.4 x 10.7 x 20.6 cm) 1.75 lb (0.8 kg) |
| Carrying Case | 4.6 x 11 x 13.5 inches (11.7 x 27.9 x 39 cm) 4 lbs (1.8 kg) |
For full Nicollet Technologies DigiSmart 4200-RT product specifications, please click here: Nicollet Technologies DigiSmart 4200-RT
Nicollet Technologies DigiSmart 4200-RT
Packs the power to test both ends of a circuit into a handheld unit that the technician can take to every job.
Includes Hard Carrying Case & Accessories As Listed
Nicollet Technologies DigiSmart 4200-RT Digi-Smart 4200-RT Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 19197
- Nicollet Technologies DigiSmart 4200-RT Test Set (BC# 19197-L/T*)
- (2) Bantam To Dual Clip Cable
- AC Adapter/Charger
- Hard Copy User Manual
- Hard Carrying Case