AFL Noyes OFI-FTTx Active ONT Fiber Identifier
$0.00
Availability:
Out of stock
SKU
4P162
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Request a Quote for
Noyes OFI-FTTx Active ONT Detector
The OFI-FTTx is a rugged, hand-held optical fiber identifier designed to identify the presence or absence of an active Optical Network Terminal (ONT) on FTTx F2 fibers at the Fiber Distribution Hub (FDH). During a test the F2 fiber does not have to be removed from service. Thus the OFI-FTTx can verify whether a splitter pigtail at the FDH is connected to an active circuit before it is disconnected for fault location or re-use. The OFI-FTTx can help verify FTTx network records and recover splitter pigtails and F2 fibers that are connected at the FDH but, in fact, are available for new customers.
When applied to a splitter pigtail at the FDH, the OFI FTTx will report either that the ONT is ムActiveメ or ムNot Detectedメ. Time to complete each test is typically one second. The OFI-FTTx is compatible with 2mm jumper cable containing standard single-mode fiber, such as SMF-28e®, or bend insensitive fiber (BIF) with a 15mm bend radius specification, such as AFL Bend Insensitive.
The OFI-FTTx is powered by two standard AA alkaline batteries, provides a low battery indication, and can typically be operated 800 times before battery replacement is necessary.
Features:
Specifications:
For full Noyes OFI-FTTx Product specifications, please click here: Noyes OFI-FTTx
The OFI-FTTx is a rugged, hand-held optical fiber identifier designed to identify the presence or absence of an active Optical Network Terminal (ONT) on FTTx F2 fibers at the Fiber Distribution Hub (FDH). During a test the F2 fiber does not have to be removed from service. Thus the OFI-FTTx can verify whether a splitter pigtail at the FDH is connected to an active circuit before it is disconnected for fault location or re-use. The OFI-FTTx can help verify FTTx network records and recover splitter pigtails and F2 fibers that are connected at the FDH but, in fact, are available for new customers.
When applied to a splitter pigtail at the FDH, the OFI FTTx will report either that the ONT is ムActiveメ or ムNot Detectedメ. Time to complete each test is typically one second. The OFI-FTTx is compatible with 2mm jumper cable containing standard single-mode fiber, such as SMF-28e®, or bend insensitive fiber (BIF) with a 15mm bend radius specification, such as AFL Bend Insensitive.
The OFI-FTTx is powered by two standard AA alkaline batteries, provides a low battery indication, and can typically be operated 800 times before battery replacement is necessary.
Features:
- Rugged, hand-held, lightweight
- In-service detection of upstream (1310 nm) activity on FTTx networks
- Determines which unparked splitter pigtails are connected to ONTs
- Does not require travel to customer (ONT) site
- Does not require disconnect of splitter pigtails
- Visual and audible indicators
- Battery operated
- Low battery indication
- FACILITY RECOVERY:
- Harvest unparked splitter legs and F2 fibers not connected to subscribers.
- TROUBLE-SHOOTING:
- Real-time confirmation of OLT to ONT connectivity at the FDH.
Specifications:
Network Types | FTTx BPON, GPON, EPON, =1:4 splitter ratio |
Network Locations | Between splitter and customer ONT |
Fiber Type | 2 mm jacketed SMF-28e®, 15mm bend radius AFL Bend Insensitive, and equivalents |
Induced Loss (typ.) | <1 dB @ 1550 nm |
Test Time (typ.) | 1 Sec |
Operating Range | Loss from ONT to FDH: 0 to 7 dB (BPON), 0 to 9 dB (GPON, EPON) |
User interface | Audio indicator and four red LEDs |
Power | 2 x AA batteries |
Battery Life | 800 tests typical |
Operating Temperature | -10 °C to 40 °C |
Storage Temperature | -20 °C to 50 °C |
Dimensions (H x W x D) | 22 x 3.8 x 3.2 cm (8.5 x 1.5 x 1.25 in) |
Weight | 0.23 kg (0.5 lbs) |
For full Noyes OFI-FTTx Product specifications, please click here: Noyes OFI-FTTx
AFL Noyes OFI-FTTx Active ONT Detector
The OFI-FTTx is a rugged, hand-held optical fiber identifier designed to identify the presence or absence of an active Optical Network Terminal (ONT) on FTTx F2 fibers at the Fiber Distribution Hub (FDH)
The OFI-FTTx is compatible with 2mm jumper cable containing standard single-mode fiber, such as SMF-28e®, or bend insensitive fiber (BIF) with a 15mm bend radius specification, such as AFL Bend Insensitive
OFI FTTx OFIFTTx
Noyes OFI-FTTx OFIFTTx Fiber Identifier Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 19560
- Noyes OFI-FTTx Active ONT Detector (BC# 19560)
- User Manual On CD-ROM
- Carrying Case