AFL Noyes OLS 2 SM Fiber Laser Light Sourc OSL2
AFL Noyes OLS 2 SM Fiber Light Source (1310nm Model)
The OLS 2 laser source series offers excellent stability and portability for accurate fiber optic testing. Four versions of the OLS 2 are offered for measurements at 1310 nm, 1550 nm, 1625 nm, and dual wavelength (1310/1550 nm). These compact units operate in either continuous wave (CW) mode or 2 kHz modulated mode.
With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters.
The OLS 2 operates on disposable batteries or AC adapter. A Low battery indication warns the user that battery replacement is necessary. The optical output is via a top panel FC, SC, or ST connector. The output may be equipped with other style connectors upon request.
When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.
For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550nm.
In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
Applications:
When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.
For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550 nm.
In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiberidentifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Noyes OLS 2 1550 Fiber Light Source
The OLS 2 laser source series offers excellent stability and portability for accurate fiber optic testing. Four versions of the OLS 2 are offered for measurements at 1310 nm, 1550 nm, 1625 nm, and dual wavelength (1310/1550 nm). These compact units operate in either continuous wave (CW) mode or 2 kHz modulated mode.
With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters.
The OLS 2 operates on disposable batteries or AC adapter. A Low battery indication warns the user that battery replacement is necessary. The optical output is via a top panel FC, SC, or ST connector. The output may be equipped with other style connectors upon request.
When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.
For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550nm.
In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiber identifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
Applications
When used with an optical power meter, the OLS 2 laser source provides an inexpensive alternative to higher priced loss test sets. The OLS 2 may be substituted for terminal equipment in the central office or head-end to provide a stable output for loss measurements.
For singlemode applications, such as Telecom or CATV, the OLS 2 may be coupled with an optical power meter as a test kit to perform optical loss tests at 1310 or 1550 nm.
In the modulation mode, the OLS 2 applies a 2 kHz tone into the fiber. This signal is detected by the OFI-200B, optical fiberidentifier, to isolate specific fibers in a bundle prior to splicing or rerouting.
Specifications:
| Optical Specifications | |
| Output Wavelength (nm) | 1550 + 20 |
| Output Power | -10 dBm |
| Laser Classification | Class 1 |
| Output Connector | FC, SC, or ST |
| Modes of Operation | CW and 2 kHz |
| Special Width | 5 nm typical |
| Stability | + 0.1 dB over 1 hours |
| General Specifications | |
| Power | 9V Battery or AC Adapter (optional) |
| Operating Temperature | 0° to 40°C |
| Storage Temperature | -10° to 50°C |
| Size (H x W x D) | 4.5 x 75 x 1.0 in (11.5 x 7.0 x 2.5 cm) |
| Weight | 1 lb. (0.45 kg) |
AFL Noyes OLS 2 SingleMode 1310nm Fiber Optical Laser Source
With an output power of -10 dBm, the OLS 2 will provide in excess of 50 dB range when used with Noyes Fiber Systems optical power meters
Includes Carrying Case & Accessories As Listed
OLS 2-1300 OLS2
Noyes OLS2 OLS-2 SM Fiber Light Source Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 33451-L/T*
- AFL Noyes OLS 2 SingleMode Fiber Optic Laser Source (BC# 33451-L/T*)
- SM Source:
- 1310nm
- ST Connector For Source
- SM Source:
- SM FC-FC Fiber Cable
- User Manual On CD-ROM
- Carrying Case (G)