Authorize.Net Secure Checkout   PayPal Logo  
Buy Now Pay Later  
Empty Image Fiber Optic Test Small Arrow ODM Small Arrow VIS Series Small Arrow VIS300

  Click Here
To View Our Return Policy
Corner Image Corner Image

DM15 - ODM VIS 300 MM Fiber Test Inspection & Cleaning Kit

ODM VIS-300 Video Fiber Connector Inspection System With
ODM DLS 350 MM Dual 850/1300nm LED Fiber Source
ODM RP 460 SM MM Fiber Optical Power Meter

Power Meter:
- 850nm
- 1310nm
- 1490nm
- 1550nm

The VIS-300 Unique external focus mechanism eliminates need for focus wheel.

The VIS-300 includes a bright 3.5 inch LCD display and precision optics to provide an unmatched FOV (field of view) of 630µm by 440µm.

Includes Hard Carrying Case & Accessories As Listed

VIS300 VIS-300 DLS 350 DLS-350 RP 460 RP460

ODM VIS300 VIS-300 MM Fiber Test Inspection & Cleaning Kit Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 23697 16314M 16312M 16313M

Corner Image Below Image Corner Image
Corner Image Table Image Corner Image
Condition Refurbished
Warranty 90 Day Exchange
  • ODM VIS 300M Video Fiber Connector Inspection Scope (BC# 23697)
  • ODM VIS 300B Video Inspection Probe (BC# 16314M)
    • SC Connector For Probe
    • LC Connector For Probe
    • 1.25mm Connector For Probe
    • 2.5mm Connector For Probe
  • ODM DLS 350 MM Dual LED Fiber Source (BC# 16313M)
    • MM Source:
      • 850nm
      • 1300nm
    • SC Connector For Source
  • ODM RP460 Optical Power Meter (BC# 16212M)
    • Power Meter:
      • 850nm
      • 1310nm
      • 1490nm
      • 1550nm
    • LC Connector For Power Meter
    • 2.5mm Adapter For Power Meter
  • IBC Brand Cleaner H125
  • (2) MM SC-SC Fiber Cables
  • SC-SC Fiber Connector
  • SC-LC Fiber Connector
  • AC Adapter/Charger
  • USB PC Interface Cable
  • User Manual On CD-ROM
  • Case For Scope w/ Strap
  • Hard Carrying Case
Corner Image Table Bottom Corner Image
Tab Image Description Tab Image
Product Tab Datasheet Product Tab
Side Image
Empty Image
Empty Image
Empty Image

VIS 300 video fiber connector inspection system

The VIS 300 is an extremely easy to use video fiber connector inspection system. The VIS 300 advances field connector inspection by a unique focus system. This development virtually eliminates the need to place the users hand in the same position each time for effective focus control. To inspect the backplane connector the user simply inserts the probe into the connector adapter. To focus simply turn the entire probe ¼ to ½ turns for complete focus range. No longer is it necessary for the user to keep one hand on the focus wheel.

The VIS 300 includes a bright 3.5 inch LCD display and precision optics to provide an unmatched FOV (field of view) of 630µm by 440µm.

Extended use Lithium Ion batteries provide 8-10 hours of continuous use. When charging is necessary the included “smart AC charger” charges the battery in 3 hours and allows the unit to continue to operate.


  • Unique external focus mechanism eliminates need for focus wheel
  • ¾ micron scratch resolution
  • Thin ergonomic probe design
  • Quick change adapter tips for all connector styles
  • 3.5 inch LCD Display
  • FOV 630µm X 440µm
  • Advanced LiIon Battery & smart technology AC charger system
  • Rugged and compact size


FOV (Field of View) FOV 630µm X 440µm
Resolution  ¾ micron
Light Source Blue LED
 Lighting Technique Coaxial
Display screen size 3.5 inch diagonal
 Battery Life  8 to 10 hours continuous
Battery charge time Three hours
 Size Probe - 7”x 1”x .75” (180mm x 25mm x 19mm)
Monitor - 4.75” x 3.5” x 1.25 (120mm x 89mm x 32mm)
Weight – (monitor, probe & case) 1.2lb ( .54kg)
 Operating Temp.  0º to 50 º C
Storage Temp - 40 º to 70 º C

ODM DLS 350 MultiMode Dual LED Source
The DLS 350 dual LED source allows stabilized power levels for accurate loss measurements on multi mode systems. Technicians can utilize each of the wavelengths included in this light source to reference and test with RP 4XX-series optical power meters and gather measurements to meet international standards.

The DLS 350 provides a 2 kHz tone output which is recognized by the RP 4XX-series power meters; the incoming 2 kHz signal is identified and an audible alert is provided by the power meter.

The dual LED source comes with a female SC adapter to allow connection to test jumpers and fiber under test. Easy removal of the adapter means that the light source ferrule can be cleaned to prevent contamination of test jumpers. Additional adapters to allow mating to other standard connectors are available.


  • 850nm/1300nm Wavelengths
  • Single output for both wavelengths
  • 2kHz tone output
  • NIST traceable
  • Long-lasting battery

Wavelength 850nm and 1300nm
Output Power -20.0 dBm Typical
Output Stability +/-0.05dB - one hour +/-0.03dB long term (15min warm up)
Spectral Width 40nm/120nm
Optical Interface Universal Connector Interface (SC, FC, ST, LC)
Tone Output 2kHz
Power Options Push Button ON, Auto Shutoff - Continuous Mode Available
Battery CR2
Dimensions 6.1x.94x.75 in. (15.5x2.38x1.90cm)
Weight 3.0 oz (8.5g)
Operating Temperature -10 to 50?C
Storage Temperature -30 to 60?C

ODM RP 460 Fiber Optic Power Meter
The RP 450, RP 455 and RP 460 Optical Power Meters measure optical power on fiber optic networks operating at 850nm, 1310nm, 1490 and 1550nm. These easy to use optical power meters provide absolute dBm or dB loss measurements on all optical networks. The RP 450 allows the user to set the incoming signal to a “zero” reference providing direct loss measurements. The RP 455 provides set ref and storage of up to 1000 measurements per wavelength. The RP 460 provides these features plus the ability to transfer data via the mini USB port to a laptop computer. The RP 455 & 460 also allows a “scroll feature” to review field measurements.

The RP 450, RP 455 and RP 460 provide an audible alert when the incoming signal is a modulated 2kHz tone. The companion TP 200, DLS 300 series LED or laser sources or any external 2kHz optical source may generate this incoming tone. This feature is very useful for quick fiber identification at the field location.

Use the RP 450, RP 455 or RP 460 to check the output at the patch panel or wall outlet in the premise, telecom or broadband market. Connection to the fiber under test is made via the universal 2.5 mm adapter. Additional male or female connector adapter styles are available. The readily available CR 2 battery provides over 1000 operations for the power meter. A LO BAT display alerts the user to replace the battery.


  • 850, 1310, 1490, 1550nm
  • Set ref, Zero function, Store and download 1000 measurements via USB to a computer
  • Audible tone alert from incoming 2kHz signal
  • Accepts all connector styles
  • NIST traceable measurements
  • Multimode or Singlemode application
  • Long battery life
  • Rugged and compact size

Wavelength range 850nm to 1625nm
Measurement range + 3 to – 60dBm
Resolution 0.01dB
Absolute accuracy +/- 0.25dB
Detector type Ge
Optical interface Universal 2.5mm
Tone identification 2kHz Incoming signal, Audible Alert
Power on Push button ON, Auto shutoff
Storage Store up to 1000 measurements per wavelength
Data transfer Mini USB Port (1000 points/wavelength)
Dimensions 6.1x.94x.75 in. (15.5x2.38x1.90cm)
Weight 3.0 oz (8.5g)

For full ODM VIS 300 MM product specifications, please click here: ODM VIS 300 MM

Empty Image
Empty Image
Side Image
Side Image Side Image Site Image

Copyright © 2003- | Phone: 419-517-6681 Toll Free: 1-800-548-2381

Find Us On Facebook Find Us On Twitter