Olympus 26MG Ultrasonic Corrosion Thickness Gage
$1,869.00
Availability:
In stock
SKU
OP01
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Olympus Panametrics 26 MG Ultrasonic Thickness Gage
The pocket-sized 26MG ultrasonic thickness gage uses dual element transducers for corrosion applications. Weighs only 8.5 oz. (0.24 kg) and offers basic features such as Automatic Probe Recognition, Fast Min mode, and long battery life.
The 26MG offers various practical measurement features such as Automatic Probe Recognition that recognizes transducer types, a Fast Min Mode that holds the minimum reading at a Fast Scan rate of 20 per second, and a Freeze Mode that freezes the display to capture critical thickness data. Its LCD with electroluminescent backlight shows thickness measurements in large, easy-to-read numerals.
The Panametrics® 26MG is a low-cost ultrasonic thickness gage designed to make accurate measurements on internally corroded or eroded materials. It weighs only 8.5 oz. (0.24 kg) and is small enough for easy, one-thumb operation. Thickness measurements are made from one side of the material with no need to cut the part. The 26MG has 250 hours of typical battery life with two easy-to-replace AA alkaline batteries. A Low Battery Indicator continuously updates battery status. You can choose from a wide array of transducers with varying frequencies, tip diameters, and temperature ranges to suit many applications (see other side). Typical applications for the 26MG include storage tanks, pipe lines, pressure vessels, boiler tubes, steam lines, ship hulls, and other structures affected by internal corrosion.
Features:
Specifications:
For full Olympus 26MG product specifications, please click here: Olympus 26MG
The pocket-sized 26MG ultrasonic thickness gage uses dual element transducers for corrosion applications. Weighs only 8.5 oz. (0.24 kg) and offers basic features such as Automatic Probe Recognition, Fast Min mode, and long battery life.
The 26MG offers various practical measurement features such as Automatic Probe Recognition that recognizes transducer types, a Fast Min Mode that holds the minimum reading at a Fast Scan rate of 20 per second, and a Freeze Mode that freezes the display to capture critical thickness data. Its LCD with electroluminescent backlight shows thickness measurements in large, easy-to-read numerals.
The Panametrics® 26MG is a low-cost ultrasonic thickness gage designed to make accurate measurements on internally corroded or eroded materials. It weighs only 8.5 oz. (0.24 kg) and is small enough for easy, one-thumb operation. Thickness measurements are made from one side of the material with no need to cut the part. The 26MG has 250 hours of typical battery life with two easy-to-replace AA alkaline batteries. A Low Battery Indicator continuously updates battery status. You can choose from a wide array of transducers with varying frequencies, tip diameters, and temperature ranges to suit many applications (see other side). Typical applications for the 26MG include storage tanks, pipe lines, pressure vessels, boiler tubes, steam lines, ship hulls, and other structures affected by internal corrosion.
Features:
- Lightweight - only 8.5 oz. (0.24 kg)
- Easy to use - pocket size
- 250 hours on two AA alkaline batteries
- Wide thickness range: 0.5 mm - 508 mm (0.20" - 19.999")
- Automatic Probe Recognition
- High Temperature capabilities
- Large backlit display
- Fast Min Mode holds thinnest reading at Fast Scan Rate
- Freeze Mode instantly captures critical thickness
- Millimeters/Inches selection
Specifications:
| Thickness Measurement Range: Note: Thickness range depends on material, transducer type, surface condition, and temperature. |
0.020 to 19.999" (0.50 to 508 mm) |
| Material Velocity Calibration Range: | 0.0300-0.5511 in/µsec (0.762- 13.999 mm/µsec) Thickness Display Resolution: LOW: 0.01" 0.1 mm STANDARD: 0.001" 0.01 mm |
| Measurement Rates: | Standard Rate: 4 per second |
| Fast Rate: | 20 per second |
| Fast Min Mode: | Rapid capture and recall of minimum thickness at Fast Rate of 20 per second. |
| Freeze Mode: | Freezes display to instantly capture critical thickness. Minmizes transducert types. Adjusts internal parameters and corrects V-path error |
| Zero Compensation mode: | Compensates for transducer temperature and zero offset |
| Display: | 4 1/2 digit (19999 counts) Liquid Crystal Display (LCD), 0.4" (10.2 mm) numerals |
| Display Hold/Blank Mode: | Display holds or blanks after measurement |
| Electroluminescent Display Back Lighting | Selectable as "on" or "Auto On" |
| Reeceiver Bandwith | Metric or English Units |
| Battery: | 2 AA Alkaline Batteries |
| Operating Time: | 250 Hours typical battery life, 30 hours continous with backlight on |
| Low Battery Indicator: | Continuously indicates battery status |
| Battery Saver | Auto Power off / Continous on |
| Case/Keypad: | Splash proof, impact-resistant Lexan Case, Sealed, color-coded keypad with tactile and audible feedback |
| Operating Temperature Range: | 10° C to +50° C, 14° F to 122° F |
| Size: | 2.55" W x 5.05" L x 1.14" H(64.8 mm x 128.7 mm x 29 mm) |
| Weight: | 8.5 oz. (0.24 kg) |
| Hazardous Area Operations: | As defined by MIL-STD-810E, method 511.3, procedure 1 |
For full Olympus 26MG product specifications, please click here: Olympus 26MG
Olympus Panametrics Model 26MG Ultrasonic Thickness Gage
The Panametrics® 26MG is a low-cost ultrasonic thickness gage designed to make accurate measurements on internally corroded or eroded materials
Typical applications for the 26MG Gauge include storage tanks, pipe lines, pressure vessels, boiler tubes, steam lines, ship hulls, and other structures affected by internal corrosion
Includes Hard Carrying Case & Accessories As listed
BC# 28596
- Olympus Panametrics-NDT Model 26MG (BC# 28596-L/T*)
- Olympus Thickness Probe LCDM-316-5B
- Olympus 1018 Steel Bar 26TBE
- Couplant B Bottle Glycerin
- Strap For Unit
- Hard Copy User Manual
- Hard Carrying Case
Request a Quote for