Fluke 700P05 with accessories

Fluke 700P05 Gauge Pressure Module

JDSU Test-Um 10 Validator NT93 Brand New Batteries

JDSU Test-Um 10 Validator NT93 Brand New Batteries

Fluke 80i-110s AC/DC Clamp-On Current Probe

$495.00
Availability: In stock
SKU
11H52

Condition: Refurbished

Warranty: 1 YEAR WARRANTY

 Fluke 80i-110s AC DC Current Probe
The Fluke 80i-110s is a clamp-on AC/DC Current Probe that reproduces current waveforms found in modern commercial and industrial power distribution systems. The probe's performance is optimized for accurate reproduction of currents at line frequency and up to the 50th harmonic waveform.

The 80i-110s is compatible with any Fluke ScopeMeter test tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features:
  • BNC input connector. A BNC-to-banana adapter (order PM9081/001 from Fluke) can also be used with standard inputs on a digital multimeter (DMM).
  • Input accuracy of 2% or better to take full advantage of the accuracy of the probe.
  • Input impedance of greater than or equal to 1 MO  in parallel with a maximum of 100 pF.
  • A passband of more than four times the frequency of the waveform to be measured.

Features:
  • Accurate AC, DC and AC+DC current measurements for Electrical, Electronic and Automotive applications.
  • Shielded for high noise immunity around electronic motor drives and ignition systems.
  • Wide measurement range from 50 milliamps to 100 amps, useful to 10 milliamps.
  • Jaw shaped for easy access to cramped spaces.
  • Safety-designed 600 volt insuIated BNC - compatible with Fluke ScopeMeter test tools, Power Harmonic analyzers, and oscilloscopes.
  • Selectable output of 10 millivolts per 1 amp for the 100 A range, and 100 millivolts per 1 amp for the 10 A range.

Electrical Specifications:
Input Current
(DC or AC peak)

100 mV/A

10 mV/A
0 to 10A <3% of reading +50 mA -
0 to 40A - <4% of reading +50 mA
40 to 80A - <12% of reading +50 mA
80 to 100A - <15% of reading

Extended Accuracy:
For other frequencies, refer to the appropriate input current range and add the error listed below to the "Basic Accuracy" error.
 
Frequency 100 mV/A 10 mV/A
1 to 5 kHz 3% 3%
5 to 20 kHz 12% 12%
>20 kHz not specified not specified

General Specifications:
Dimensions: 67 x 231 x 36 mm (2.6 x 9.1 x 1.4 inches)
Weight: 330g (11.6 oz.), battery included
Output Cable: 1.6 meters (63 inches)
Maximum Conductor Size: 11.8 mm (.46 inch)
Maximum Jaw Opening: 12.5 mm (.49 inch)
Temperature: operating: 0 to 50C (32 to 122F)
nonoperating: -30 to 70C (-22 to 158F)
Relative Humidity (Operating): 0 to 85% (0 to 35C; 32 to 95F)
0 to 45% (35 to 50C; 95 to 122F)
Altitude: operating: 0 to 2000 meters (0 to 6560 feet)
nonoperating: 0 to 12000 meters (0 to 40000 feet)
Demagnetize Probe: Open and close the probe jaws several times
Battery: 9 volt, IEC 6LR61
Consumption: 8.6 mA typical
12 mA maximum
Service life: 55 hours typical, when Alkaline IEC 6LR61 is used
40 hours minimum, when Alkaline IEC 6LR61 is used
Battery indicator (ON): Green LED dims when battery voltage is below 6.5V
Overload indicator (OL): Red LED indicates that waveform or impulse is out
of range
 

Fluke 80i-110s AC/DC Clamp-On Current Probe

The 80i-110s is compatible with any Fluke ScopeMeter test tool, Power Harmonics Analyzer, Oscilloscope Or Multimeter.
(Not Included In This Sale)

Fluke 80i-110s is a clamp-on AC/DC Current Probe that reproduces current waveforms found in modern commercial and industrial power distribution systems

The probe's performance is optimized for accurate reproduction of currents at line frequency and up to the 50th harmonic waveform.

80 110

 

BC# 23427M-L/T*

  • Fluke 80i-110s AC/DC Current Clamp(BC# 23427M-L/T*)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!