Radiodetection RD 7000 DL Locator w/ TX-3

 Radiodetection RD 7000 DL Cable and Pipe Locator

Delivering fast, accurate, reliable and repeatable locate information for all utilities
Locating specific pipes and cables in large underground networks is becoming increasingly complex. Ground distortion effects, caused by differing soil types and proximity to other conductors, make the operatorﾒs job more difficult and time-consuming. The most important requirements for a locator under these circumstances are ease of use, accuracy and reliability. Radiodetectionﾒs RD7000 addresses this need with several groundbreaking features that deliver accurate, reliable and repeatable measurements.

The new RD7000 range of locators are powerful successors to the industry standard RD4000 SL, TL, PL and DL family. RD7000 delivers exceptional performance in areas of interference.

Ergonomics:
The RD7000 is ergonomically designed to deliver a superior performing locator that provides the user with a light weight, energy efficient and exceptionally well balanced tool. The RD7000 is 28% lighter than the industry standard RD4000, which encourages extended use. Despite its weight and form, the RD7000 retains the environmental durability associated with an IP54 rating, meaning you can operate it in almost any environment. The receiver and transmitter feature a large, high contrast, backlit LCD screen that provides the user with clear information in any light conditions. The intuitive and responsive interface is designed so the operator can access any feature with ease. The keypad uses a self explanatory icon set that is consistent on both the transmitter and the receiver.

Centrosﾙ:
For 30 years Radiodetection has revolutionized cable locator design with over 50 software and hardware patents as part of our commitment to product improvement. This research has developed into a single entity called Centrosﾙ. Centrosﾙ combines new and innovative algorithms with established software on a high-performance processor core. Centrosﾙ improves the accuracy and repeatability of measurements and delivers unprecedented responsiveness in the field. Centrosﾙ delivers powerful signal filtering and analysis allowing continued operation even in the most electrically noisy environments. Centrosﾙ provides our customers with the most powerful measurement engine of any cable and pipe locator.

eCALﾙ:
is a novel Radiodetection technique that allows the operator to validate the original factory calibration of the RD7000. This means the operator has confidence that the locator continues to meet its factory calibration. eCAL can issue and print a validation certificate without needing to return the RD7000 to a service center.

Peak/Null mode:
is a tool to identify the effects of field distortion due to ground conditions or nearby utilities. Simultaneous display of Peak bar graph response and proportional Null arrows allow a quick assessment of locate conditions.

Transmitters:
Radiodetection also introduces a new transmitter range. Three models, providing 1, 3 and 10 Watt outputs, use a patented system architecture and amplifier housed in a robust case. They have programmable direct connect and induction frequencies up to 200kHz. Each Tx delivers a constant current across the entire spectrum and has a high voltage mode for high impedance environments.

RD7000DL Water and Pipeline Industry
For contract technicians working in pipe location and inspection, from sewers to maritime boilers, to petrochemical plants.

The RD7000DL locator is specifically designed to detect not only active and passive frequencies but also three different sonde signals. This makes the DL the ideal product for standard cable and pipe location and the ideal solution for locating deep, underground dirty water pipes and drains and where the pipe material does not allow the use of standard locating technology but where sondes can be deployed.

The different sonde frequencies allow the RD7000DL to locate pipes made from a wide variety of materials including: cast iron, plastic (PE), clay, fiber, concrete and brick.

Features:

RDTX-3 Transmitter
Based on a fully digital platform, the new family of Radiodetection transmitters supports the entire range of Radiodetection RD7000 and RD8000 cable and pipe locators.

The Tx-1 is a low power transmitter. The Tx-3 has a higher current and induction capability as well as Fault Find. The Tx-10 has the highest current capability with both Fault Find and CD modes as standard.

All models feature a patented three-stage phase sensitive amplifier that delivers a groundimpedance compensated, constant current across its entire bandwidth in either direct connect, clamp or inductive mode. The transmitters use less power and are ergonomically designed to deliver superior performance in a new light-weight, well-balanced case.

The transmitters are 10% lighter than the industry standard T10 yet each is IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information. The interface is intuitive and responsive, allowing the operator to access any feature with ease.

SideStepautoﾙ:
allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this information to optimize the active frequency. SideStepautoﾙ helps to improve locate accuracy and extends battery life.

All models are compatible with the complete range of RD7000 and RD8000 frequencies in both inductive and direct connect modes. The transmitters use 8 D-cell batteries and can be powered from a vehicle using a 12V cable plug (it is recommended that an approved Radiodetection isolation transformer is used).

As an additional feature, each model has a multimeter function providing measurement of output voltage, line voltage, current, impedance and power.

Features:

• Three power versions 1 Watt, 3 Watt, and 10 Watt
• 8KFF - Locates faults from short circuit up to 2MO
• 5 CD paired low frequencies
• Current delivered at 30V or high voltage mode (90V for high impedance operation)
• The transmitters have 200Hz to 200kHz active frequency range
• Selectable modes support RD7000 and RD8000 specific model locator frequency ranges
• 8 inductive frequencies
• SideStepauto
• Transient overvoltage protection
• Multimeter function

Specifications:

For full Radio Detection RD7000DL specifications, please click here: RadioDetection RD7000DL

Radiodetection SPX RD 7000 DL Cable Pipe Locator w/ Radiodetection SPX TX-3 Transmitter

For contract technicians working in pipe location and inspection, from sewers to maritime boilers, to petrochemical plants

The ideal product for standard cable and pipe location and the ideal solution for locating deep, underground dirty water pipes and drains and where the pipe material does not allow the use of standard locating technology but where sondes can be deployed

RD 7000 DL RD7000 RD-7000DL TX 3

Radio Detection RD 7000 DL TX-3 RD7000 DL TX3 Cable Pipe Fault Locator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 20326L/T* 20325-L/T*

• Radiodetection RD 7000 DL Cable Pipe Locator (BC# 20326-L/T*)
• Radiodetection TX-3 Transmitter (BC# 20325-L/T*)

Having trouble viewing this file? Click this link to download