SC8108 Network Cable Test Meter
Condition: Refurbished
Warranty: 90 Day Exchange
- One person enough to complete cable continuity check
- Checks wiring error in 5, coaxial and telephone line
- Such as open circuit, short circuit, jumper wire, reverse connection or cross-talk interference
- Locates the wiring or connection error
- Measures cable length and determines the distance of open circuit and short circuit
- Dynamically calibrates cable length and makes length measurement as accurate as 97%
- Simple and easy use, big screen to display test clear
- Portable unit with long battery life (wait-case 50 hours)
- Automatically time-delay shut off
- Measures length and pair with or without far-end recognizer
- Locates cable and there are 8 far-end passive test jacks (ID no.: ID1 - ID 8)
- Far-end recognize with prompting voice
- Self-checking function and automatically compensates any change in battery capacity or ambient temperature
- Single board computer software watchdog design and reliable operating
Specification:
- LCD : 4 x 16 characters big screen (valid visual field 61.6 x 25.2 mm)
- Type of Tester Cable : STP / UTP twin twisted cable, coaxial cable, telephone line
- - Tester Port : Tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R).
- - The extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line
- Length Measurement of Twin Twisted Cable: Scope : 1350M (31,200 FT)
- - Calibration accuracy : 3% (± 0.5m or ± 1.5 ft) (calibrating cable > 5 M)
- - Shipment accuracy : 5% (± 0.5m or ± 1.5 ft) (AMP, AT&T Class 5 cable)
- - Display : M or FT
- Length Calibration : User can set calibration factor by himself by a given length cable. The length of calibrating cable is more than 5M.
- Wire Sequence and Locating Cable Error : Check errors such as open circuit, short circuit, reverse connection, cross over or cross-talk interference.
- Locating Cable : Included 1 far-end passive test jack
- Working Ambient Temperature : -10°C to 60°C
- Use 4 x AA batteries (Not included)
- Item size : 180 x 80 x 40 mm
Includes:
- SC8108 Network Cable Tester
- Wiremap
- (2) Cat5 Patch Cables
- Hard Copy User Manual
SC8108 SC-8108 Network Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.