Radiodetection RD7000DL+ Locator w/ TX-3
$3,259.00
Availability:
Out of stock
SKU
1CP18
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Request a Quote for
SPX RD7000+ Uitility Cable, Pipe & RF Makrker Locator For Preicison Pipe Loactiing
RD7000+ – delivering fast, accurate, reliable and repeatable locate information for all utilities
Locating specific pipes, cables and markers in large underground networks is becoming increasingly complex. Ground distortion effects, caused by differing soil types and proximity to other conductors, make the operator’s job more difficult and time-consuming. The most important requirements for a locator under these circumstances are ease of use, accuracy and reliability. Radiodetection’s RD7000+ addresses these needs with several groundbreaking features that deliver accurate, reliable and repeatable measurements.
The RD7000+ is a complete range of locators designed to meet specific industry needs. RD7000+ can locate and automatically estimate depth of pipes, cables and most commonly used RF markers, allowing for faster and more accurate surveys, even in areas of high level of electrical interference.
Usability
The RD7000+ is ergonomically designed to deliver a superior performing locator that provides the user with a light weight, energy efficient and exceptionally well balanced tool that is comfortable for extended periods of use. Despite its weight and form, the RD7000+ retains the environmental durability associated with an IP54 rating, meaning you can operate it in almost any environment.
The locator and transmitter both feature large, high contrast, backlit LCD screens that provide the user with clear information in any light conditions. The intuitive and responsive user interface has easily identifiable icons that are consistent across the locator and transmitter range, ensuring straightforward operation.
Centros
RD7000+ units are Centros enabled. Centros is a measurement engine based on more than 30 years of continuous development, combining new and innovative algorithms with established software on a high-performance processor core. Centros improves location accuracy and repeatability and delivers timely responsiveness in the field.
Compass
Allows the operator to quickly and easily follow the target line by visually indicating the relative orientation of the target cable and the locator. By indicating the alignment of the target cable with the locator, Compass helps to improve accuracy when measuring depth.
Dynamic Overload Protection
Extends the RD7000+’s locate capability into areas where other products fail by automatically filtering out large and unwanted signals – aiding accurate location of the target pipe, cable and marker even in electrically noisy conditions, for example near High Voltage overhead cables.
Peak/Null Mode
A tool to identify the effects of field distortion due to ground conditions or nearby utilities. Simultaneous display of Peak bargraph response and proportional Null arrows allow a quick assessment of locate conditions.
Marker Locator
RD7000+ marker locators detect all commonly used RF utilities markers. TruDepth automatic depth estimation, without the need of two-steps measurements, allows for faster and more accurate surveys. Combined mode allows scanning for pipes, cables and markers all at the same time.
Data Logging
On board memory (PLM and TLM models only) allows over a year’s worth of locate history to be stored at one-second intervals. Data can be backed-up to a PC at any time, giving virtually unlimited record keeping for the life of the product. Retrieved data can be analyzed to aid in ensuring compliance and identifying training requirements
Remote Calibration
Using the supporting Windows® compatible software, locators can be checked for correct calibration and operation over the internet, without the need to return the RD7000+ to a service center. Operators can then print, email or save a calibration certificate, or book a service should any issue be detected.
DL/DLM - Water & Pipline Industry
Specifically designed for the water industry, and supported by the wide range of Radiodetection pipe location accessories.
The DL and DLM locators are designed to detect not only active and passive frequencies but also four different sonde signals. This makes the DL range ideal not only for standard pipe, cable and markers (DLM model) location but also for locating deep, underground dirty water pipes and drains where the pipe material does not allow the use of standard locating technology but where sondes can be deployed. The DL and DLM are also capable of locating Cathodic Protection System (CPS) signals applied to pipelines, further extending its versatility.
Four different sonde frequencies allow the DL/DLM to locate pipes made from a wide variety of materials including: cast iron, plastic (PE), clay, fiber, concrete and brick. DLM models allow users to document surveys using SurveyCERT.
The DL range is the ideal partner for the Radiodetection and Pearpoint ranges of inspection equipment. For details of available sondes and accessories see www.radiodetection.com.
Featuring Compass and Dynamic Overload Protection as standard, DL and DLM aid pipe, cable and markers (DLM only) location even in electrically noisy environments.
Radiodetection Transmitters
Based on a fully digital platform, the new family of Radiodetection transmitters support the entire range of Radiodetection RD7000+ and RD8000 cable and pipe locators.
The Tx-1 is a low power transmitter. The Tx-3 has a higher power and induction capability as well as Fault Find. The Tx-10 has the highest power capability with both Fault Find and CD modes as standard.
All models feature a three-stage phase sensitive amplifier that delivers a groundimpedance compensated, constant current across its entire bandwidth in either direct connect, clamp or inductive mode. The transmitters use less power and are ergonomically designed to deliver superior performance in a new light-weight, wellbalanced case.
The transmitters weigh in at just 6lb (less than 2.9kg) yet each is IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information. The interface is intuitive and responsive, allowing the operator to access any feature with ease.
SideStepauto™: allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this information to optimize the active frequency. SideStepauto helps to improve locate accuracy and extends battery life.
All models are compatible with the complete range of RD7000+ and RD8000 frequencies in both inductive and direct connect modes. The transmitters use 8 D-cell batteries and can be powered from a vehicle using a 12V cable plug (it is recommended that an approved Radiodetection isolation transformer is used).
As an additional feature, each model has a multimeter function providing measurement of output voltage, line voltage, current, impedance and power
To support the extended RD8000 iLOC feature set, the Tx-3 and Tx-10 can be ordered with integrated iLOC.
Transmitter features
RD7000+ Model Specfiications
Technical Specifications For Locator & Transmitter
For full SPX Radio Detection RD7000+DL product specifications, please click here: SPX Radio Detection RD7000+DL
RD7000+ – delivering fast, accurate, reliable and repeatable locate information for all utilities
Locating specific pipes, cables and markers in large underground networks is becoming increasingly complex. Ground distortion effects, caused by differing soil types and proximity to other conductors, make the operator’s job more difficult and time-consuming. The most important requirements for a locator under these circumstances are ease of use, accuracy and reliability. Radiodetection’s RD7000+ addresses these needs with several groundbreaking features that deliver accurate, reliable and repeatable measurements.
The RD7000+ is a complete range of locators designed to meet specific industry needs. RD7000+ can locate and automatically estimate depth of pipes, cables and most commonly used RF markers, allowing for faster and more accurate surveys, even in areas of high level of electrical interference.
Usability
The RD7000+ is ergonomically designed to deliver a superior performing locator that provides the user with a light weight, energy efficient and exceptionally well balanced tool that is comfortable for extended periods of use. Despite its weight and form, the RD7000+ retains the environmental durability associated with an IP54 rating, meaning you can operate it in almost any environment.
The locator and transmitter both feature large, high contrast, backlit LCD screens that provide the user with clear information in any light conditions. The intuitive and responsive user interface has easily identifiable icons that are consistent across the locator and transmitter range, ensuring straightforward operation.
Centros
RD7000+ units are Centros enabled. Centros is a measurement engine based on more than 30 years of continuous development, combining new and innovative algorithms with established software on a high-performance processor core. Centros improves location accuracy and repeatability and delivers timely responsiveness in the field.
Compass
Allows the operator to quickly and easily follow the target line by visually indicating the relative orientation of the target cable and the locator. By indicating the alignment of the target cable with the locator, Compass helps to improve accuracy when measuring depth.
Dynamic Overload Protection
Extends the RD7000+’s locate capability into areas where other products fail by automatically filtering out large and unwanted signals – aiding accurate location of the target pipe, cable and marker even in electrically noisy conditions, for example near High Voltage overhead cables.
Peak/Null Mode
A tool to identify the effects of field distortion due to ground conditions or nearby utilities. Simultaneous display of Peak bargraph response and proportional Null arrows allow a quick assessment of locate conditions.
Marker Locator
RD7000+ marker locators detect all commonly used RF utilities markers. TruDepth automatic depth estimation, without the need of two-steps measurements, allows for faster and more accurate surveys. Combined mode allows scanning for pipes, cables and markers all at the same time.
Data Logging
On board memory (PLM and TLM models only) allows over a year’s worth of locate history to be stored at one-second intervals. Data can be backed-up to a PC at any time, giving virtually unlimited record keeping for the life of the product. Retrieved data can be analyzed to aid in ensuring compliance and identifying training requirements
Remote Calibration
Using the supporting Windows® compatible software, locators can be checked for correct calibration and operation over the internet, without the need to return the RD7000+ to a service center. Operators can then print, email or save a calibration certificate, or book a service should any issue be detected.
DL/DLM - Water & Pipline Industry
Specifically designed for the water industry, and supported by the wide range of Radiodetection pipe location accessories.
The DL and DLM locators are designed to detect not only active and passive frequencies but also four different sonde signals. This makes the DL range ideal not only for standard pipe, cable and markers (DLM model) location but also for locating deep, underground dirty water pipes and drains where the pipe material does not allow the use of standard locating technology but where sondes can be deployed. The DL and DLM are also capable of locating Cathodic Protection System (CPS) signals applied to pipelines, further extending its versatility.
Four different sonde frequencies allow the DL/DLM to locate pipes made from a wide variety of materials including: cast iron, plastic (PE), clay, fiber, concrete and brick. DLM models allow users to document surveys using SurveyCERT.
The DL range is the ideal partner for the Radiodetection and Pearpoint ranges of inspection equipment. For details of available sondes and accessories see www.radiodetection.com.
Featuring Compass and Dynamic Overload Protection as standard, DL and DLM aid pipe, cable and markers (DLM only) location even in electrically noisy environments.
Radiodetection Transmitters
Based on a fully digital platform, the new family of Radiodetection transmitters support the entire range of Radiodetection RD7000+ and RD8000 cable and pipe locators.
The Tx-1 is a low power transmitter. The Tx-3 has a higher power and induction capability as well as Fault Find. The Tx-10 has the highest power capability with both Fault Find and CD modes as standard.
All models feature a three-stage phase sensitive amplifier that delivers a groundimpedance compensated, constant current across its entire bandwidth in either direct connect, clamp or inductive mode. The transmitters use less power and are ergonomically designed to deliver superior performance in a new light-weight, wellbalanced case.
The transmitters weigh in at just 6lb (less than 2.9kg) yet each is IP54 rated to cope with demanding environmental conditions. Each model has a removable accessory tray and a weatherproof battery compartment. A large, high contrast, backlit LCD screen provides the user with clear information. The interface is intuitive and responsive, allowing the operator to access any feature with ease.
SideStepauto™: allows the transmitter to calculate the optimum frequency based on ground impedance. The transmitter uses this information to optimize the active frequency. SideStepauto helps to improve locate accuracy and extends battery life.
All models are compatible with the complete range of RD7000+ and RD8000 frequencies in both inductive and direct connect modes. The transmitters use 8 D-cell batteries and can be powered from a vehicle using a 12V cable plug (it is recommended that an approved Radiodetection isolation transformer is used).
As an additional feature, each model has a multimeter function providing measurement of output voltage, line voltage, current, impedance and power
To support the extended RD8000 iLOC feature set, the Tx-3 and Tx-10 can be ordered with integrated iLOC.
Transmitter features
- Three power versions: 1 Watt, 3 Watt and 10 Watt
- 8KFF – locates faults from short circuit up to 2M?
- CDFF – for long distance fault finding
- 5 CD paired low frequencies
- Current delivered at 30V or high voltage mode (90V for high impedance operation)
- The transmitters have 256Hz to 200kHz active frequency range
- Selectable modes support RD7000+ and RD8000 specific model locator frequency ranges
- 8 induction frequencies
- SideStepauto
- Transient overvoltage protection
- Multimeter function
- 8 D-cell battery cassette (rechargeable battery pack option available)
- Accessory tray (for ground stake, direct connect leads and earth reel)
- Plug and play accessories (compatible with RD4000 transmitter accessories)
- External 12V DC operation (using Radiodetection isolation transformer)
- Click-touch splash-proof sealed keypad
- High contrast LCD
| Power (Watt) | 3 |
| Active frequencies | 15 |
| Induction frequencies | 8 |
| Induction field strength | 0.8 |
| 8KFF | Yes |
| Frequency mode | Manual |
RD7000+ Model Specfiications
| Passive Frequencies: | |
| Power/Radio | Yes |
| CPS | Yes |
| Active Frequencies: | |
| 512Hz | Yes |
| 640Hz | Yes |
| 8kHz | Yes |
| 33kHz | Yes |
| 65kHz | Yes |
| 83kHz | No |
| 131kHz | No |
| 200kHz | No |
| Sonde Frequencies: | |
| 512Hz | Yes |
| 640Hz | Yes |
| 8kHz | Yes |
| 33kHz | Yes |
| Features: | |
| Compass | Yes |
| Dynamic Overload Protection | Yes |
| TruDepth | Yes |
| Depth in power mode | No |
| 8kHz Fault Find | No |
| Peak mode | Yes |
| Null mode | No |
| Peak / Null mode | Yes |
| StrikeAlert | Yes |
| Remote Calibration | Yes |
| Marker Models: | |
| Marker mode | Yes |
| Combined mode | Yes |
| SurveyCERT | Yes |
| Data Logging | No |
| CALSafe (Service reminder) | No |
Technical Specifications For Locator & Transmitter
| Features are model dependant | |
| Sensitivity | 5µA at 1 meter (33kHz) |
| Dynamic range | 140dB rms/√Hz |
| Selectivity | 120dB/Hz |
| Maximum depth | Line: 20' / 6m Sonde: 50' / 15m RF Markers: Near Surface: 2' / 60cm Ball Marker: 4.9' / 1.5m Mid-Range: 5.9' / 1.8m Full Range: 7.9' / 2.4m |
| Depth accuracy | Line: ± 5% tolerance 4" / 0.1m to 10' / 3m Sonde: ± 5% tolerance 4" / 0.1m to 23' / 7m RF Markers: ± 15% ± 2" / 5cm up to the maximum depth |
| Locate accuracy | ± 5% of depth |
| Fault-Finding (FF) | Diagnose cable sheath faults from short circuit to 2M? using the A-frame |
| Max Transmitter Power output | 1W (Tx-1), 5W (Tx-5 and Tx-5B), 10W (Tx-10 and Tx-10B) |
| Dynamic overload protection | 30dB (automatic) |
| Batteries | Cable and Pipe Locator:2 x D-cells (LR20) or optional Li-Ion battery pack Marker locator: Li-Ion battery pack or 3 x D-cells (LR20) Transmitter: 8 x D-cells (LR20) or optional Li-Ion battery pack |
| Battery Life (continuous usage) | Cable and Pipe Locator:Alkaline up to 13 hours Marker Locator: Li-Ion or Alkaline up to 25 hours Transmitter: Alkaline up to 23 hours |
| Compliance | FCC, RSS 310 RoHS, Weee, CE, Bluetooth |
| Weight | Cable and Pipe Locator:4.2lbs / 1.9kg (including alkaline batteries) Marker Locator: 4.6lbs / 2.1kg (including Li-Ion battery pack) Transmitter: 6.2lbs / 2.8kg (including alkaline batteries) 9.3lbs / 4.2kg (including accessories) |
| Dimension (H x D x W) | Cable and Pipe Locator: 25.5" x 11.3" x 4.9" / 648 x 286 x 125mm Marker Locator: 25.5" x 11.3" x 7" / 648 x 286 x 177mm Transmitter: 14" x 8.9" x 8.1" / 356 x 227 x 207mm |
| Construction | Injection Molded ABS Plastic |
| Ingress Protection | IP54 |
| Operating Temperature | 14 to 122°F / -10 to 50°C |
For full SPX Radio Detection RD7000+DL product specifications, please click here: SPX Radio Detection RD7000+DL
SPX RD7000+ DL Cable Pipe Locator w/
SPX TX-3 3 Watt Transmitter
Designed to detect not only active and passive frequencies but also four different sonde signals.
RD 7000 DL RD7000 RD-7000DL + TX 3 plus
BC# 28108-L/T* 28109-L/T*
- SPX Radio Detection RD7000+ DL Precision Cable Pipe Locator (BC# 28108-L/T*)
- SPX Radio Detection TX-3 3 Watt Transmitter (BC# 28109-L/T*)
- User Manual On CD-ROM