Sadelco DisplayMax 800 Signal Level CATV Meter
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Features
- ±1.0 dB Accuracy On board noise source provides precision calibration. Accuracy is guaranteed over time and temperature at all frequencies and power levels.
- Pass-Fail Installation Check Check your entire system or just your favorite channels. On screen report summarizes results.
- Digital Channel Measurement Check average power of digital channels. View flatness across the entire channel. Measures QAM, QPSK, VSB & QPR.
- Ingress Analysis Automatically searches reverse band for ingress. Peak hold function catches intermittent problems.
- Data Recording One button recording makes documentation easy. Automatically performs 24 HR FCC testing. Downloads directly to printer or to a computer.
- Self Calibrating No need for costly calibrations Unit is self calibrating
- Made in USA
Specifications Technical Frequency Range: 5-872 MHz
Accuracy: ±20 KHz
Resolution: 125KHz
IF Bandwidth: 280KHz
Level Measurement
Range: -30 ± 60 dBmV
Accuracy: ± 1.0 dB at 77° F ± 2.0 dB Total (0° - 120° F)
Resolution: 0.1 dB
Ingress Sweep: Sweeps Sub Band in 250 KHz steps.
Digital Channel Measurement
Average Power: ± 1.8 dB at 77° F
Accuracy: ± 2.8 dB Total (0° - 120° F)
Type: QAM, QPSK, VSN and QPR
Auto Calibration
Noise Source Stability: 0.2 dB 0° - 120° F Measurements corrected for power level, frequency and temperature.
Automated Testing
Scan Rate: 6 Carriers/sec
Storage: >40 Scans of 135 Channels each.
Range: 50dB
Accuracy: ± 2.0 dB at 77° F (± 3.0 dB 0° - 120° F)
HUM
Range: 0 - 5%
Filter: 20 - 200 Hz
Tilt: Automatically calculated from user selected carriers.
Audio: Adjustable volume, waterproof mylar speaker.
General
Physical Dimensions: 4.25" x 10" x 2.75"/ 11 cm x 25.5 cm x 7cm
Weight: 3 lbs (1.4Kg) including case & batteries.
Operating Temp: 0° - 120° F (-18° to 49°C)
Storage Temp: -4° to 140° F (-20° to 60° C)
Battery: Type 6 Sub C Cells
Charge Time: 4 Hours
Battery Life: 4 hours Continuous (backlight off)
Electronic Shut-Off: Saves power extends operating time
Standard Channel Plans: NTSC, HRC, IRC, AIR (VHF,UHF), PAL, Custom plans available on request.
For full Sadelco Displaymax 800 product specifications, please click here: Sadelco Displaymax 800
Sadelco DisplayMax 800 Signal Level CATV Meter
Frequency Range: 5 - 872 MHz, Self Calibrating, Data Recording, Ingress Analysis, Digital Channel Measurement
Includes Carrying Case & Accessories As Listed
Sadelco DisplayMax 800 CATV Meter DisplayMax-800 CATV Meter Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 27074
- Sadelco DisplayMax 800 (BC# 27074)
- Coax Cable
- AC Adapter/Charger
- RS232 PC Interface Cable
- User Manual on CD-ROM
- Carrying Case w/ Strap