Sumitomo Type-45S SM MM Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
The Type 45S Micro-Single is an economical means for creating automatic, low-loss optical fiber fusion splices offering superb splicing portability. The front-to-back workflow is ideal for splicing in confined areas such as aerial or taut-sheath applications.
The Type-45S typically requires less than 20 seconds to make an automatic fusion splice, and the average splice loss for identical single mode fibers is 0.05 decibels (dB). The Type-45S is equipped with an on-board splice protection heater that is used to heat shrink a fiber protection sleeve over a completed splice. A 60mm fiber protection sleeve can be fully shrunk in less than 75 seconds.
Features:
- Both power sources, AC adapter and battery, are available.
- The portable capability of the T-45S has been improvedusing the slot-in AC adapter/battery.
- Fiber loading without fiber holder.
- Newly developed FFES optical system provides highspeed splicing and clear fiber image, which allows visualcheck. (FFES-Full fiber in Focus in Equal Size)
- Newly developed heater is capable of high speed heatingoperation.
- 40 consecutive splicing/heating operation with one fullycharge battery.
- The mounting of a large wind protector enables splicingoperation in 15m/s strong wind.
- 5.6 inch large TFT color monitor provides clear fiber imageeven in direct sunlight.
- Protection glass attached to mirror gives you much easiercleaning and maintenance.
- White LED illumination enables identification of a ribboncolor and fiber loading even at dark places.
- Automatic arc test insures an optimum arc is achievedfor various environmental conditions, as well as splicingdifferent manufactures fiber.
Specifications
Alignment Method | Fixed V-Groove |
Fiber Requirement | Silica Glass |
Profile Type | SMF, MMF and NZ-DSF |
Cladding Diameter | 125µm |
Coating Diameter | 250 to 900µm |
Typical Splice Loss, Identical Fibers | SMF: 0.05dB MMF: 0.03dB NZ-DSF: 0.07dB |
Number of Fusion Condition Settings | 48 Programs |
Splice Parameters | 7 Adjustable Parameters |
Arc Test Compensation | Automatic |
Number of Heater Condition Settings | 10 |
Typical Splice Cycle Time | 20 Seconds (Set to Loss Estimation) |
Proof Test | Standard, 200 Grams (0.44 lb) |
Splice Data Storage | 500 Splices |
On-board Splice Protection Heater
5.6ヤ Color LCD Monitor
User Friendly Software With Help Features
Operation by AC Power or 12V Li-ion Battery
Tool-free Maintenance for Changing Electrodes
For full Sumitomo Type-45S product specifications, please click here: Sumitomo Type-45S
Sumitomo Type-45S Singlemode & Multimode Fusion Splicer
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes Sumitomo FC-6S High Precision Fiber Optic Cleaver, Hard Carrying Case & Accessories As Listed
Sumitomo Type-45S Type45S Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 15107
- Sumitomo Type-45S Fusion Splicer (BC# 15107)
- Sumitomo FC-6S High Precision Fiber Optic Cleaver w/ Case
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Sumitomo PS-65 AC Adapter
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Hard Carrying Case (G)