JDSU DSAM-2500B kit with accessories

JDSU Acterna DSAM-2500B Digital Service CATV Meter (w/ OPT: Browser, Close-Out, VoIP, VoIP Check, Secure Sync, BPI+Cert3, Home Cert, Docsis1.1)

JDSU T-BERD 5800 kit with accessories

JDSU T-BERD 5800 V2 1G Ethernet 10G WAN LAN Network Tester 5822P

Sunrise Telecom SunSet MTT w/ SSMTT-41V VDSL VTU-R & SSxDSL-8 Dual T1 Modules

$1,295.00
Availability: In stock
SKU
5Z28

Condition: Refurbished / Calibrated

Warranty: 1 YEAR WARRANTY

The SunSet MTT (Modular Test Toolkit) helps ensure timely delivery of a variety of access network services. With more than 35 test modules now shipping, the handheld SunSet MTT provides field technicians the industry's broadest selection of test options needed to install, verify, and troubleshoot a wide variety of service technologies.

The SunSet MTT family is comprised of various chassis configurations allowing you to match your testing needs and budget. The SunSet MTT ACM (Advanced Cable Maintenance) chassis offers a powerful combination of cable maintenance and service verification testing, along with a high resolution color display. The SunSet MTT Basic Colour chassis is the economic choice for those who need service verification testing without the cable maintenance features.

Metropolitan ethernet Increased broadband deployment to homes and businesses, along with faster core technologies, are driving demand for Metropoliltan Ethernet and storage services. There's a serious need to deploy and optimize metro networks, quickly and inexpensively. The SunSet MTT meets that need. With test modules for Ethernet, Gigabit Ethernet, and Fibre Channel, the SunSet MTT provides a cost-effective platform for testing in the metro.

Multi-tasking The huge range of plug-in interface modules allows an engineer with an MTT unit to tackle a wide range of test applications - and troubleshoot at multiple levels - from physical to IP. Follow the links in the table below for more details and helpful application diagrams

 

Key Features

  • Color display
  • Easy-to-use interface
  • Fast and easy one-button auto test
  • Dual trace TDR for in-depth fault location
  • RFL to locate resistance faults
  • Spectrum analyzer - 30 MHz PSD background noise
  • 30 MHz insertion loss
  • Voice frequency features
  • Longitudinal balance
  • Circuit noise and power influence
  • Power harmonics analysis
  • Detaptor (patented) to determine lengths of bridge taps
  • Supports many SSMTT/SSxDSL test modules

SSxDSL-8 Dual T1 Module

The SSxDSL-8 Dual T1 Module, part of the SunSet Modular Test Toolkit (MTT) family of products, is a rugged, battery-operated handheld test solution for comprehensive T1 testing. The MTT product family features the SunSet MTT as the industry?s premium handheld platform for access network service installation, verification, and troubleshooting applications. The Dual T1 Module, suited for everything from cable installation and maintenance to protocol monitoring, offers a full suite of tools for testing T1 circuits including pulse mask analysis, frequency and signal level measurement, error detection, alarm monitoring, voice frequency, and loopback control.

Features

  • Full duplex T1 testing - bidirectional monitoring
  • Frequency and signal level measurement
  • CSU and NIU emulation and loopback control
  • HDSL span control
  • Intelligent repeater control
  • ESF facility data link
  • Voice frequency monitoring
  • Pulse mask analysis
  • MF/DTMF/DP dialing and analysis
  • ISDN PRI call setup and analysis
  • GR-303 analysis
  • SS7 protocol analysis
  • Frame relay testing
  • DDS testing

Benefits

  • Lightweight
  • Flexible modular design
  • Eliminates the need for multiple instruments
  • Leverages existing MTT platform
  • Cost-effective and future-proof

Applications

  • Accept a new T1 span (out-of-service testing)
  • Monitor an in-service circuit (in-service testing)
  • Loop a CSU or NIU on a T1 line
  • Check frame slip and frame synchronization
  • Measure a T1 signal level and pulse shape
  • Talk and listen on a voice channel on a T1 line
  • Fractional T1 testing
  • Place/receive an ISDN call
  • Troubleshoot an ISDN PRI problem with protocol trace monitoring and decoding
  • Monitor the TMC/CSC control channel in a GR-303 system
  • Bidirectional monitoring of SS7 signaling links
  • Verify frame relay services over a T1 line

Specifications

Connectors
DS1 L1 Tx/Rx: Bantam (f)
DS1 L2 Tx/Rx: Bantam (f)
Handset: RJ-9 (f)

DS1 Interface
Frame structure: ESF, SF-D4, SLC-96, Unframed
Line code: AMI, B8ZS
Transmitter
Clock: Internal, looped, external
Receiver
Frequency range: 1542 to 1546 kHz

Test Rates
Full and Fractional T1

Test Patterns
Fixed and Pseudo random patterns

Error Injection

Measurements
Simplex current measurements (in SSMTT-C, SSMTT-ACM+, SSMTT-ACM only)
Signal measurements
Alarm statistics
Error measurements
Measurement record
Frequency measurements
Event and Record printing
View received data

CSU and NIU Loopback Control

HDSL Span Contro

Westell & Teltrend Looping Device Control

ESF Facility Data Link
Monitor and send T1.403 PRM and BPM on FDL
Supports automatic HDLC protocol handling.

SLC-96 Data Link
Send and receive message
WP1, WP1B, NOTE formats
Alarms, switch-to-protect, far end loop
To TR-TSY-000008 specifications
SLC-96 FEND loop

CSU and NIU Emulation
Bidirectional
Responds to loopback commands
Graphic indication of incoming signal status
Simultaneous display of T1 line measurements
Automatic generation of AIS and Yellow alarm
Loopbacks

Voice Frequency Capabilities
Drop and Insert DS0 audio testing
Voice insert & monitoring
VF tone generation
VF level and frequency measurements
Signaling monitor

VF Dialing and Analysis (SWxDSL-8VF)
Dialing
MF/DTMF/DP dialing up to 32 digits
Trunk type: E&M, ground/loop start, FXO/FXS
Call analysis

ISDN PRI Call Setup and Monitor (SWxDSL-8PR)
Bidirectional monitoring and call analysis
National ISDN-2, AT&T 5ESS, and Northern Telecom DMS-100 compatible
NT and TE emulation
Voice and data call setup and receive
Built-in microphone and speaker for B-channel talk/listen
Supports multirate Nx64k data calls
Bit error rate test with G.821 analysis
User programmable trace filter, view bidirectional real time message flow.
Trace storage

GR-303 Analysis (SWxDSL-8GR)
Bidirectional monitoring of TMC/CSC/EOC channels
Telcordia GR-303-CORE
TMC/CSC monitoring
EOC verification

GR-303 EOC Decode (SWxDSL-8EOC)
Complete decode of embedded operations channel to Layer 7
Supports ASN.1, ROSE, CMISE, GR-303-IMD

SS7 Protocol Analysis (SWxDSL-8SS7)
Supports protocol analysis for SS7 TUP, ISUP, SCCP, SNM, SNT messages
Supports Bellcore TR-NWT-000246, ITU-T Q.700 series (General, Message Transfer Part, SCCP, TUP, ISUP, TCAP), Chinese (14 and 24 bits) standards
Capture and store messages for decoding and protocol analysis
Capture Layer 1 events
Filters: PRE & POST
Message storage

SS7 TCAP Analysis (SWxDSL-8TCAP)
ANSI T1.114
TCAP filter and decode

Frame Relay Basic (SWxDSL-8FR)
LMI standards: ITU-T Q.933, ANSI T1.617, LMI (DLCI 1023, GOF Vendors), NO LMI
Modes: UNI DTE, UNI DCE

LMI Analysis
Results: Link OK Total, Link Errored Total, Timeout Error, Response Sequence Number, Wrong Message
PVC Status

PING Test
Results: Number of PINGs, Number of PINGs sent, PING status (Received, Unreached, Errored), Round Trip Time (Current, Average, Maximum, Minimum)
InARP support
Echo PING
IP encapsulation conforms to RFC1490 specification

FOX Test
Results: PVC Status, Current Rate, Errored Frames, RSN Error, SSN Error, Frame Check Sequence (FCS) Error, Count of Frame Received with FECN, with BECN, with DE, Count of transmit frames, Count of received frames

Statistics Analysis
T1 monitoring
Frame relay performance and statistics
DLCI analysis and statistics

Frame Relay NNI (SWxDSL-8NR)
LMI standards: ITU-T Q.933, ANSI T1.617, LMI (DLCI 1023, GOF Vendors), NO LMI
Modes: NNI USER, NNI NETWORK

LMI Analysis, PING Test, FOX Test, Statistic Analysis - as described in Frame Relay Basic section

DDS Testing (SWxDSL-8DDS)
Choose receive and transmit timeslots independently
Loopbacks: Latching, interleaved; CSU, DSU, OCU, DS0-DP, 8-bit user
Measurements: Bit errors, Bit error rate
Control code send/receive: Abnormal, mux out-of-sync, idle

Pulse Mask Analysis

Sunrise Telecom SunSet MTT With
Sunrise Telecom SSxDSL-8 Dual T1 Module
&
Sunrise Telecom SSMTT-41V Conexant VDSL VTU-R Module

Installed Options:
- AA2: SSxDSL-L/Coil
- AY1: Chassis Type 1

Includes Carrying Case & Accessories As Listed

Sunset-MTT SunsetMTT

Sunrise Telecom SunSet MTT SSMTT-41V SSxDSL-8 SunSet-MTT SSMTT-41V SSxDSL-8 Telecom Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 24273

  • Sunrise Telecom SunSet MTT w/ Options: (BC# 24273-L/T*)
    • AA2: SSxDSL-L/Coil
    • AY1: Chassis Type 1
  • Sunrise Telecom SSxDSL-8 Dual T1 Module (BC# 24290-L/T*)
  • Sunrise Telecom SSMTT-41V Conexant VDSL VTU-R Module (BC# 24289-L/T*)
  • (2) Ethernet Cables
  • SA265 Cross Over Cable
  • RS232 Cable P/N: 140-11950-001
  • (2) Dual Bantam Cables
  • (2) Bantam To Bantam Cables
  • RJ45 To Dual Bantam Cables
  • RJ11 To 3-Clip Cable
  • DC Car Charger
  • AC Adapter/Charger
  • Power Cord
  • Hard Copy User Manual
  • Case For Unit
  • Carrying Case

 

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!