Fluke Networks 990DSL kit with accessories

Fluke Networks 990DSL CopperPro Loop Tester w/ WB TDR Options

Fluke 190-204 kit with accessories

Fluke 190-204 ScopeMeter 200MHz 4CH 2.5GS/s

TTC JDSU Acterna T-BERD 107A T-Carrier Analyzer

$695.00
Availability: In stock
SKU
3X56

Condition: Refurbished / Calibrated

Warranty: 90 Day Exchange

Today?s demanding network testing environment calls for an instrument that is powerful, compact, and easy to use. TTC?s T-BERD? 107A meets all these requirements and more. Ideal for testing from the central office, in the field, and at the customer premises, this TTC® product provides all the testing capability necessary for troubleshooting the entire T1 span. It quickly and easily performs a full range of T-Carrier testing in the convenience of a lightweight, rugged, handheld package.

 

Highlights

 

  • Reduce Setup Time
    The automatic configuration feature immediately determines the proper framing and pattern so the technician can quickly monitor live circuits.
  • Test Full T1 Span
    Error and signal analysis can be performed at any point along a T1 span, including repeater input. This instrument is ideal for full installation and maintenance testing along T-Carrier spans.
  • Reduce Testing Time
    Qualify T1 spans at the touch of a button with the automated BRIDGTAP and MULTIPAT® tests developed by TTC. These automated test patterns eliminate the need for individual tests.
  • Troubleshoot Equipment Problems
    Emulate the customer premises channel service unit (CSU) and network interface unit (NIU) from the span to isolate the toughest problems.
  • Identify Timing Problems
    Quickly identify network synchronization problems between equipment and a reference signal with the timing slip measurement.
  • Monitor VF Channels
    Listen to individual channels and monitor data and ABCD signaling bits on all 24 channels when troubleshooting DSO problems. Measure VF level, frequency, and quality with the channel monitor feature.
  • Decode SLC® Datalinks
    Decode alarms and datalink messages when installing and troubleshooting SLC systems with the SLC Decode Option.
  • Minimize Downtime
    The Smart Loopback/Command Codes Option enables the technician to isolate problems anywhere along the network with minimal circuit downtime. Use intelligent repeater technology to qualify and maintain circuits in the field and non-intrusively query performance data. Span problems can be sectionalized remotely before dispatching maintenance personnel.
  • Maximize Stress Testing
    Transmit and receive pre-programmed, long user-patterns including 55 OCTET and T1 DALY. The Advanced Stress Patterns Option stresses circuits as recommended by the ANSI T1.403 standard.
  • Decode ESF Signal
    Verify remote in-service circuit performance from the decoded ESF broadcast and access performance statistics by monitoring NIUs with the Enhanced ESF Option.
  • Verify Fractional T1 Service
    Use the Fractional T1 Option to perform bit error rate tests on selected channels to verify transmission quality on contiguous and noncontiguous FT1 bandwidths. Insert VF tones on single DSO channels.
  • Combine Convenience with Power
    Flash memory technology enables complete field software upgrades in minutes. Battery operated, rugged, and lightweight (4.5 lb.), this test set is ideal for the field service technician.
 

 

Measurements

 

Errors
    Bit Errors, Bit Errored Seconds, Bit Error Rate, CRC Errors, CRC Errored Seconds, CRC Error Rate, Frame Errors, Frame Errored Seconds, Frame Error Rate, Bipolar Violations, Bipolar Violation Seconds, Bipolar Violation Rate

 

Signal
    Received Frequency (Hz), Receive Signal Level (dBdsx), Received Signal Level (V p-p), Simplex Current, Timing Slips, ABCD Signaling Bits, Data Bits, VF Level, VF Frequency

 

Summary
    Bit Errors, Violations Frame Errors, CRC Errors, Receive Frequency (Hz),     Timing Slips

 

Time
    Signal Loss Seconds, Test Length, Elapsed Time, Test End In, Date, Time,     Battery Charge

 

Datalink
    SLC Alarm Seconds*, SLC Alarm Field Size*

 

*Optional

 

 

Specifications

 

Operating Modes
    Self Test, Automatic Configuration, T1, T1 D4, T1 ESF, T1 SLC,
    SLC-M1*, SLC-M2*, T1 D1D, FT1 D4 Framed*, FT1 ESF
    Framed*, T1 Test Loopback, T1 Line Loopback, SMARTNIU*,
    T1 MBLT

 

Patterns
    All Ones, 1:1, 1:7, 2 IN 8, 3 IN 24, T1-QRSS, BRIDGTAP,
    MULTIPAT, User 1, User 2, User 3, All Zeros, 404 Hz*,
    1004 Hz*, 2804 Hz*, 2713 Hz*, T1 DALY*, T1-2/96*,
    T1-3/54*, T1-4/120*, T1-5/53*, 55 OCTET*, MIN/MAX*

 

Input and Output Connectors
    Bantam and RS-232 (printer operation)

 

Input Impedance
    BRIDGE: =1000 O or greater with ALBO
    TERM: 100 O ±5% with ALBO
    DSX-MON: 100 O ±5% with AGC

 

Receive Level
    BRIDGE or TERM: +6 to -35 dBdsx
    DSX-MON: +6 to -24 dBdsx (of resistive loss)

 

Line Build Out (LBO)
    Range: 0, -7.5, -15.0, -22.5 dB
    Accuracy: ±1 dB at 772 kHz

 

VF Level
    Range: +3.0 to -40 dBm
    Resolution: 0.1 dB
    Accuracy: ±0.5 dBm

 

VF Frequency
    Range: 60 to 3904 Hz (+3.0 to -26.0 dBm)
               60 to 3400 Hz (-26.0 to -40.0 dBm)
    Resolution: 1 Hz
    Accuracy: ±1 Hz

 

Transmit Timing Sources
    Internal Clock, Recovered Clock, External Clock

 

Loopback Codes
    CSU, CSU Line (ESF), CSU Payload (ESF), NIU (FAC1, FAC2,
    FAC3), NIU Network (ESF), Programmable (3 to 8 bit),
    Intelligent Repeaters

 

Line Codes
    AMI, B8ZS

 

Signal Loss
    No pulses detected for 150 ms

 

Frame Loss
    D1D: 2 out of 5 Ft bits in error
    D4: 2 out of 5 Ft bits in error
    ESF: 2 out of 5 frame bits in error
    SLC: 2 out of 5 Ft bits in error

 

Pattern Loss
    Fixed Pattern: 100 errors in =1000 bits
    QRSS: 250 errors in =1000 bits

 

Electrical/Mechanical Specifications
    Size:
        8.5? H x 4.25? W x 3.25? D
        (21.6 cm x 10.8 cm x 8.3 cm)
    Weight:
        4.5 pounds (2.1 kg)
    Operating Temperature:
        32° F to 122° F (0° C to 50° C)
    Storage Temperature:
        -40° F to 167° F (-40° C to 75° C)
    Power:
        AC Adapter: 120 VAC to 12 VDC
        Charging Time: 8 hours (nominal)
        Battery: 12 VDC, lead-acid electrolyte
        Operation: 4 hours (nominal)

 

*Optional

 

    

For full TTC T-BERD 107A product specifications, please click here: TTC T-BERD 107A

TTC JDSU T-BERD 107A T-Carrier Analyzer TBERD T1

Installed Options:
- 107A-2: Advanced Stress Patterns
- 107A-4: Smart Loopback/Command

Provides All The Testing Capability Necessary For Troubleshooting The Entire T1 Span

Includes Carrying Case & Accessories As Listed

TBERD 107A T BERD 107

TTC T-BERD 107A T-BERD107A TestPad Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 21954-L/T*
  • TTC T-BERD 107A T-Carrier Analyzer w/ Options: (BC# 21954-L/T*)
    • 107A-2: Advanced Stress Patterns
    • 107A-4: Smart Loopback/Command
  • (2) BNC To BNC Cables
  • AC Adapter/Charger
  • User Manual On CD-ROM
  • Strap For Unit
  • Carrying Case (G)
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!