Tektronix TekScope THS730A 200MHz Oscilloscope
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Tektronix THS730A oscilloscope
The Tektronix THS730A oscilloscope is a graph-displaying device it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.
The Tektronix THS730A oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the moving partsof a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.
Features & Benefits
- 200 and 100 MHz Bandwidth
- 1 GS/s and 500 MS/s Sampling Rates per Channel
- Two Channels and Dual Digitizers
- External Trigger
- 33/4 Digit DMM with Datalogger
- Roll Mode
- Extra Bright Backlit Display
- 8 ns Glitch Capture
- Independently Floating Isolated Oscilloscope and DMM Channels for Safety
- Full Floating Measurement Capability up to 600 VRMS
- Advanced Trigger Delay, Pulse and Video (Line Count and Field Select)
- 21 Automatic Measurements
- RS-232 Programmability/ Communications
- NiCd Battery and AC Adapter
- Deluxe Soft Carrying Case
Applications
- Field or Bench Electronic Troubleshooting
- Floating (Nongrounded) System Measurements
Oscilloscope Functions
- Bandwidth: 200 MHz
- Sample Rate (each channel): 1 GS/s
- Time/Division Range: 2 ns to 50 s/div
- Channels: Two
- Sensitivity: 5 mV to 50 V/div (to 500 V/div with 10X probe).
- Position Range: ±10 div.
- DC Gain Accuracy: ±2%.
- Vertical Resolution: 8-Bits.
- Record Length: 2500 points.
- Horizontal Accuracy: ±200 ppm.
- Roll Mode: = 0.5 s/div.
- Autorange: User-selectable.
- Trigger Modes: Auto, Normal.
- Trigger Types: Edge, Pulse, Video, External.
- Video Trigger Formats and Field Rates: Odd field, even field and line.
- External Trigger Input: 5 MHz TTL compatible.
- Waveform Processing: Add, Subtract, Multiply, Calculate Watts = V x I.
- Waveform Storage: 10 waveforms.
- Acquisition Modes: Sample, Envelope, Average, Peak Detect.
- Cursor Measurements: delta Volts, ? Time, 1/? Time (Hz), Degree (phase).
- Cursor Types: Horizontal Bars, Vertical Bars, Paired (volts @ time).
- Display System: Interpolation: Sin(x)/x. Format: YT and XY. Mode: Vector, Dot, Vector Accumulate, Dot Accumulate.
DMM Specifications
- DC Voltage Ranges: 400.0 mV to 880 V.
- DC Volts Accuracy: ±(0.5% of reading + 5 counts).
- True RMS AC Voltage Ranges: 400.0 mV to 640 V.
- Maximum Float Voltage: 600 VRMS CAT II, each channel (probe dependent).
- Resolution: 4000 count, 3-3/4 digits.
- AC Volts Accuracy: ±(2% of reading + 5 counts).
- Resistance Ranges: 400.0 O to 40.00 MO.
- Resistance Accuracy: ±(0.5% of reading + 2 counts); 40 MO: ±(2% of reading + 5 counts).
- Diode Test Range: 0 to 2 V.
- Continuity Check: Audible tone when < 50 O.
- Modes: Min, Max, ?, Max-Min, Avg, Hold.
- Nonvolatile Storage: 10 DMM screenshots.
- External Trigger Input: 5 MHz TTL compatible.
- Vertical Zoom Capability: 2X, 5X, 10X.
- dB Scale: Selectable, referenced from 1 mV to 10 V.
- dBm Scale: Selectable, referenced from 50 O to 600 O.
General Specifications
- Setups: 10 front-panel setups.
- Safety: UL3111-1, CSA1010.1, EN61010-1, IEC61010.1.
- EMC: Meets Directive 89/336/EEC.
- Power: NiCd rechargeable battery pack with AC adapter (both included).
- Battery Life: Approx. 2 hours from full charge.
- Display: Backlit LCD.
- Display Resolution: 320 x 240.
Physical Characteristics
- Width: 177 mm
- Height: 217 mm
- Depth: 51 mm
- Weight: Net 1.45 kg
For full Tektronix THS730A product specifications, please click here: Tektronix THS730A
Tektronix TekScope THS730A HandHeld 200MHz Dual-Channel Oscilloscope
200MHz SCOPE / DMM / 1GS/s
Includes Carrying Case & Accessories As Listed
730A THS-730A THS730
Tektronix THS730A THS-730A Handheld Oscilloscope Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 42612-L/T*
- Tektronix TekScope THS730A (BC# 42612-L/T*)
- (2) Voltage Probes
- (2) Hard Point Test Leads
- (2) Hook Clips
- (2) Alligator Clips
- Battery Packs
- AC Adapter/Charger
- RS232 PC Interface Cable
- Hard Copy User Manual
- Carrying Case w/ Strap