Visual Networks X.21 with accessories

Visual Networks X.21 Interface Inline Probe ASE

Net Optics CV-MM/CU ports

Net Optics CV-MM/CU Ethernet Converter

Visual Networks V.35 Interface Inline Probe ASE

$89.95
Availability: In stock
SKU
1H194

Condition: Refurbished

Warranty: 90 Day Exchange

 Visual Networks V.35 Universal Inline Probe

The Visual UpTime® Select? V.35 LinkSafe? inline probe ASE is deployed inline on a T1 access line, typically between a CSU/DSU and customer premises equipment. This ASE supports Multi-Protocol software for deployment in standard frame relay or HDLC networks and IP Transport software for deployment in frame relay or HDLC-based networks that use IP switching.
The V.35 inline probe ASE supports V.35 connectivity through a V.35 Data Terminal Equipment (DTE) interface on the network side and Data Communications Equipment (DCE) interface on the user side. The ASE operates at data rates up to 2.048 Mbps, deriving timing from the network-side and sourcing timing on the user side. It also includes LinkSafe technology to protect circuit integrity in case of an ASE outage, as well as power failure noti?cation.

Features:
  • Inband management capabilities
  • LinkSafe technology
  • Multi-Protocol or IP Transport software 
  • Service Level Agreement (SLA) metrics
  • Voice over IP (VoIP) analysis capability
  • Application analysis capability
  • LMI spoo? ng
  • LAN management port
  • Power loss detection
  • Realtime events

Specifications:
 
General
Dimensions 8.16? (20.7 cm) x 9.0? (22.8 cm) x 1.62?(4.1 cm)
Weight 2.10 lbs.
Data Rate 0 to 2.048 Mbps synchronous
Timing Mode RD: Always synchronous with SCR
SD: Synchronous with SCT or SCTE
Environment
Operating Temperature 0° to +40°C (+32° to +104° F)
Storage Temperature -20° to +55°C (-4° to +131°×F)
Clearance Requirement Minimum of 3? (7.62 cm) space on sides.
Operating and Storage Humidity 10% to 80%, noncondensing
Power Requirements
Input 100 to 240 VAC
Frequency 50/60 Hz
Input Current Rating 0.5 amps
V.35 User Interface (DCE)
Configuration DCE for interfacing with DTE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Connector Female 34-pin V.35 connector
Signaling RTS, DTR
V.35 Network Interface (DTE)
Con?guration DTE for interfacing with DCE
Data and Clock Leads ITU-T V.35
Signaling Leads EIA RS-232 (ITU-T V.28)
Connector Female 34-pin V.35 connector
Signaling CTS, RLSD, DSR
Serial Port Interface
Baud Rate 19200 or 9600 bps
Parity 8 data bits, no parity
Stop Bit 1 stop bit
Electrical Format EIA RS-232, DTE
Connector RJ-45
Ethernet 10/100BaseT Interface
Bite Rate 10 or 100 Mbps
Connector 8-pin modular jack: RJ-48




For full Fluke Networks Visual Uptime Select product specifications, please click here: Fluke Networks Visual Uptime Select

Visual Networks V.35 Interface Universal Inline Probe

The V.35 inline probe ASE is deployed inline on a T1 access line, typically between a CSU/DSU and customer premises equipment

The V.35 inline probe ASE supports V.35 connectivity through a V.35 Data Terminal Equipment (DTE) interface on the network side and Data Communications Equipment (DCE) interface on the user side

Includes Accessories As Listed

Visual Networks V.35 V35 ASE Inline Probe Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

 

BC# 13758

  • Visual Networks V.35 Interface Universal Inline Probe (BC# 13758)
  • Ethernet Cable
  • Power Cord
  • RS232 PC Interface Cable
Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!