AFL Noyes OLS4 OPM4 SM MM Fiber Optic Loss Test Set (OPM4-4D)
Condition: Refurbished
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- AFL Noyes OLS 4 SM MM Fiber Optic Laser Source w/ Wave ID (BC# 9208A-L/T*)
- SM Source:
- 1310nm
- 1550nm
- MM Source:
- 850nm
- 1300nm
- (2) SC Connectors For Source
- SM Source:
- AFL Noyes OPM 4-4D SM MM Power Meter (BC# 9208B-L/T*)
- Power Meter:
- 850nm
- 980nm
- 1310nm
- 1490nm
- 1550nm
- 1625nm
- 2.5mm Connector For Power Meter
- SM SC-SC Fiber Optic Cables
- MM SC-SC Fiber Optic Cables
- (4) Fiber Wipes
- OLS OPM Quick Reference Guide
- Test Results Manager Software CD-ROM V1.4.17
- Carrying Case (G)
Noyes OLS 4 Quad Laser Source
NOYES OLS4 from AFL is a hand-held, rugged, integrated two-port LED and LASER light source designed for performing insertion loss measurements on multimode or single-mode fiber optic links when used with an optical power meter. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements.
Faster Test Times
with WaveID – In WaveID mode, the NOYES OLS4 encodes each wavelength with a unique WaveID code. When used with a NOYES power meter, the pair can send and receive two wavelengths each test – doubling testing efficiency – reducing test time!
Flexible Output Connector Adapter Design
The OLS4 output ports are equipped with UCI based removable adapters to allow the output connectors to be inspected and cleaned, while allowing field change of output style between FC, SC, ST, and LC connector adapters.
Features:
- Encircled Flux Compliant
- Integrated LED and Laser light source
- 2 kHz Tone for use in Fiber tracing / locating
Specifications:
| Wavelength | 850 ±30 nm 1300 +30/-20 nm | 1310 ±20 nm 1550 ±20 nm |
| Spectral Width | 45 nm (typ) 120 nm (typ) | 5 nm (max) 5 nm (max) |
| Emitter Type | LED | Laser |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 | |
| Output Power | >-20 dBm, 62.5 μm multimode | 0 dBm, 9 μm single-mode |
| Output Stability | ±0.1 dB over 8 hours (after 5 minutes warm-up) | ±0.05 dB over 1 hour (after 15 minutes warm-up) ±0.1 dB over 8 hours (after 15 minutes warm-up) |
| Tone Output | N/A | 2 kHz |
| Power | 2 AA batteries, optional AC adapter | |
| Battery Life | SM port: 72 hours typical (40 hours minimum). MM port: 30 hours typical (20 hours minimum) | |
| Operating Temperature | -10 °C to 50 °C, 90 % RH (non-condensing) | |
| Storage Temperature | -30 °C to 60 °C, 90 % RH (non-condensing) | |
| Size (H x W x D) | 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) | |
| Weight | 0.29 kg (0.65 lb) | |
Noyes OLS 4 Quad Laser Source
NOYES OLS4 from AFL is a hand-held, rugged, integrated two-port LED and LASER light source designed for performing insertion loss measurements on multimode or single-mode fiber optic links when used with an optical power meter. The LED and LASER outputs are stabilized to ensure accurate test results per current TIA/EIA requirements.
Faster Test Times
with WaveID – In WaveID mode, the NOYES OLS4 encodes each wavelength with a unique WaveID code. When used with a NOYES power meter, the pair can send and receive two wavelengths each test – doubling testing efficiency – reducing test time!
Flexible Output Connector Adapter Design
The OLS4 output ports are equipped with UCI based removable adapters to allow the output connectors to be inspected and cleaned, while allowing field change of output style between FC, SC, ST, and LC connector adapters.
Features:
- Encircled Flux Compliant
- Integrated LED and Laser light source
- 2 kHz Tone for use in Fiber tracing / locating
Specifications:
| Wavelength | 850 ±30 nm 1300 +30/-20 nm | 1310 ±20 nm 1550 ±20 nm |
| Spectral Width | 45 nm (typ) 120 nm (typ) | 5 nm (max) 5 nm (max) |
| Emitter Type | LED | Laser |
| Safety Class | Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03 | |
| Output Power | >-20 dBm, 62.5 μm multimode | 0 dBm, 9 μm single-mode |
| Output Stability | ±0.1 dB over 8 hours (after 5 minutes warm-up) | ±0.05 dB over 1 hour (after 15 minutes warm-up) ±0.1 dB over 8 hours (after 15 minutes warm-up) |
| Tone Output | N/A | 2 kHz |
| Power | 2 AA batteries, optional AC adapter | |
| Battery Life | SM port: 72 hours typical (40 hours minimum). MM port: 30 hours typical (20 hours minimum) | |
| Operating Temperature | -10 °C to 50 °C, 90 % RH (non-condensing) | |
| Storage Temperature | -30 °C to 60 °C, 90 % RH (non-condensing) | |
| Size (H x W x D) | 14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in) | |
| Weight | 0.29 kg (0.65 lb) | |
OPM 4 Optical Power Meter
The OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables. The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack. The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Multimode or single-mode applications
- Premises (Ge), Telco (InGaAs), and Broadband (+26 dBm) models
- Wave ID - automatic wavelength identification and switching
- Passive Optical Networks (PON) testing
- Dual Wavelength testing
- 270 Hz, 330 Hz, 1 kHz, and 2 kHz Tone detection
- Large LCD with Backlight
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- AA alkaline, optional rechargeable NiMH battery pack
- Battery Gauge
- N.I.S.T traceable
SPECIFICATIONS:
| Calibrated wavelengths (nm) | 850, 980, 1310, 1490, 1550, 1625 |
| Detector type | Filtered InGaAs |
| Measurement range (dBm) | +26 to -50 |
| Tone detect range (dBm) |
+6 to -30 |
| Wavelength ID range (dBm) |
+6 to -30 |
| Accuracy (dB) | ± 0.25 |
| Resolution (dB) | 0.01 |
| Measurement units | dB, dBm, µW |