Agilent HP 83650B 50GHz Synthesized Sweep Signal Generator w/ Opt 001

Agilent 83650B Signal Generator
The Keysight 83650B synthesized sweeper is the standard of excellence for applications requiring the high performance and accuracy of a synthesized source and the speed and versatility of a sweep oscillator. Synthesized broadband frequency coverage is generated by indirect synthesis, enabling the Keysight 83650B to achieve low single-sideband phase noise performance. It also delivers excellent harmonic performance with harmonics at least 50 dB below the carrier from 2.0 to 26.5 GHz, and at least 40 dB below the carrier above 26.5 GHz.

Features:

• +10 dBm calibrated output power
• -50 dBc harmonics <26.5 GHz typical
• SSB phase noise <-80 dBc at 10 GHz and 10 kHz offset
• Complete analog sweeper
• Pulse, amplitude and frequency modulation (8360B Series only)

Specifications:

Frequency range:	10 MHz to 50 GHz
Frequency bands (for CW signals):	Frequency range n 10 MHz to <2 GHz 1 2 GHz to <7 GHz 1 7 GHz to <13.5 GHz 2 13.5 GHz to <20 GHz 3 20 GHz to <26.5 GHz 4 26.5 GHz to <38 GHz1 6 38 GHz to 50 GHz 8
Internal 10 MHz time base	Accuracy = Calibration ± Aging Rate ± Temperature Effects ± Line Voltage Effects Aging Rate: 5 × 10–10/day, 1 × 10–7/year With Temperature: 1 × 10–10/°C, typical With Line Voltage: 5 × 10–10 for line voltage change of 10%, typical
Sweep functions	Control: Start/stop, center/span, marker (M1-M2), alternate sweep Trigger: auto, external, single, or GPIB
Sweep modes	CW and manual modes Accuracy: Same as time base Switching Time: For steps within a frequency band: 15 ms + (step size/1 GHz) × 5 ms step size Maximum, or across band switch points: 50 ms Step or list modes within a frequency band: 5 ms2 + (step size /1 GHz) × 5 ms
Step sweep mode	Accuracy: Same as time base Minimum Step Size: Same as frequency resolution Number of Points: 2 to 801 Switching Time: Same as CW Dwell Time: 100 µs to 3.2 s
List mode	Accuracy: Same as time base Minimum step size: Same as frequency resolution Number of points: 1 to 801 Switching time: Same as CW Dwell time: 100 µs to 3.2 s
Ramp sweep mode	Accuracy (sweep time ≥100 ms and ≤5 s): Sweep widths >n × 10 MHz: (start, stop, and bandedge frequencies are phase-locked corrected during sweep) Lesser of 1% of sweep width or n × 1 MHz + 0.1% of sweep width. Sweep time: 10 ms to 100 s, 300 MHz/ms maximum rate
Minimum settable	Standard: –20 dBm Option 001: –110 dBm
Resolution:	0.02 dB
Switching time	(without attenuator change): 10 ms, typical
Temperature stability	0.01 dB/°C, typical
Accuracy	(dB) Specifications apply in CW, step, list, manual sweep, and ramp sweep modes of operation.
General
Storage temperature range:	–40 °C to 75 °C
Operating temperature range:	0 °C to 55 °C
EMC:	Within limits of CISPR Pub.11/1990 Group 1, Class A, and Mil-Std-461C Part 7 RE02
Operation:	Requires 30-minute warm-up from cold start at 0 °C to 55 °C. Internal temperature equilibrium reached after two-hour warm-up at stable ambient temperature.
Frequency reference:	Reference time base is kept at operating temperature with the instrument connected to AC power. Instruments disconnected from AC power for more than 24 hours require 30 days to achieve time base aging specification. Instruments disconnected from AC power for less than 24 hours require 24 hours to achieve time base aging specification
Power requirements	48 to 66 Hz; 115 volts (+10/–25%) or 230 volts (+10/–15%); 400 VA maximum (30 VA in STANDBY)
Net weight:	27 kg (60 lb)
Shipping weight:	36 kg (80 lb)
Dimensions:	178 H × 425 W × 648 mm D (7.0 × 16.75 × 22.5 inches)

For full Agilent 83650B Signal Generator product specifications, please click here: 83650B

Agilent HP 83650B 50GHz Synthesized Sweep Signal Generator

Installed Options:
- 001: Step Attenuator

Frequency Range: 10 MHz to 50 GHz

Includes Accessories As Listed

BC# -L/T*

Agilent 83650B 83650-B Sweep Signal Generator Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

• Agilent HP 83650B 50GHz Synthesized Sweep Signal Generator w/ Option: (BC# -L/T*)
  • Installed Option:
    • 001: Step Attenuator
      
• Power Cord
• User Manual on CD

Having trouble viewing this file? Click this link to download