Anritsu MS2036A HandHeld VNA Master Vector Network Analyzer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Anritsu MS2036A VNA Master (BC# L/T*)
- Armored Test Port Cable
- Ethernet Cable
- (2) BNC Cables
- 2GB Flash Card
- Battery Pack
- DC Car Charger
- AC Adapter/Charger
- Power Cord
- USB PC Interface Cable
- User Manual On CD-ROM
- Carrying Case w/ Strap
Anritsu MS2036A VNA Vector Network Analyzer
The VNA Master employs vector correction after an open-short-load calibration to ensure accuracy, repeatability, and overall quality of 1-port and 2-port measurements. As an improvement over traditional scalar measurement approaches, the VNA Master removes all the systematic errors associated with the 1-port reflection measurements, including directivity, source match, and reflection tracking. Additionally, the VNA Master removes transmission response errors and transmission source match errors (i.e., a 1-path, 2-port correction) when conducting 2-port transmission measurements. The vector correction of the VNA Master offers superior measurement accuracy for detecting problems or phase matching cables in a convenient handheld product so you can perform VNA measurements anywhere, anytime.
Features:
- Two-port vector network analysis (2MHz to 6 GHz)
- >42 dB directivity
- Smith Charts, Phase, and Group Delay measurements
- Broad spectrum analysis (9 kHz to 7.1 GHz)
- Wide dynamic range 100 dB typical
- Excellent DANL (with preamp): 163dBm in 1 Hz RBW
- Superior Single Side Band (SSB) Phase Noise of < 100dBc/Hz at 10 kHz offsets
- Fast sweep speed of 200 ms in 10 MHz span
Specifications:
| Frequency |
|
| Frequency Range: |
2 MHz to 6 GHz (operational down to 610 kHz) |
| Frequency Accuracy: |
25 ppm |
| Frequency Resolution |
10 Hz |
| Data Points: |
Low, Medium, High (137/275/551) |
| Interference Immunity: |
On-Channel +17dBm On-Frequency 0 dBm (RF Out), +30 dBc (RF In) |
| 1- Port Power: |
High: 0 dBm (typical) |
| 2-Port Power: |
High: 0 dBm (typical) Low: -35 dBm (typical) |
| Corrected Directivity: |
42 dB (2 MHz to 6 GHz) |
|
1-Port Accuracy: |
= <0.44 + |20 log(1 ±10–E∆/20)| dB, typical; E∆ = Directivity – Measured Return Loss |
|
|
70 dB, 2 MHz to 10 MHz |
Return Loss: |
Range: 0 to 60 dB |
VSWR: |
Range: 1 to 65 dB |
Cable Loss: |
Range: 0 to 30 dB |
1-Port Phase: |
Range: –180º to +180º |
| Spectrum Analyzer Specifications |
|
| Frequency Range: |
9 kHz to 7.1 GHz (with MS2036A) |
| Maximum Continuous Input: |
+30 dBm |
| Tuning Resolution: |
1 Hz |
Frequency Reference: |
Aging: ±1 ppm/10 years |
| Frequency Span: |
10 Hz to 7.1 GHz plus 0 Hz (zero span) |
| Sweep Time: |
Minimum 100 ms, 10 μs in zero span |
| Sweep Trigger: |
Free run, Single, Video, External |
| Resolution Bandwidth: |
Bandwidth (–3 dB width) 1 Hz to 3 MHz in 1-3 sequence ±10%; 0-span, 1 Hz to 1 MHz 8 MHz demodulation bandwidth |
Video Bandwidth: |
(–3 dB width) 1 Hz to 3 MHz in 1-3 sequence |
|
SSB Phase Noise: |
–100 dBc/Hz max at 10, 20, and 30 kHz offset from carrier |
|
Amplitude Measurement Range: |
DANL to +30 dBm |
|
Absolute amplitude accuracy |
9 kHz to ≤10 MHz, ±1.5 dB |
| General |
|
| Maximum Continuous Input into Vector Network Analyzer: |
Test Port, Type N: +23 dBm, ±50 VDC |
| Maximum Continuous Input into Spectrum Analyzer: |
10 dB attenuation, +30 dBm, ±50 VDC |
| RF Input VSWR into Spectrum Analyzer: | 2.0:1 maximum, 1.5:1 typical (≥10 dB attenuation) |
| Interfaces: | Type N female RF Connector Type N female RF Out Port and RF In Port (50 Ω) BNC female connectors for external references and external trigger Reverse BNC connector for GPS antenna |
| RF Detector: | Type N(m) 50 Ω |
| Display |
Bright daylight-viewable color transmissive LCD: Full SVGA, 8 in |
| Languages |
Built-in English, Spanish, Italian, French, German, Japanese, Korean, and Chinese. The instrument also has the capability to have two customized languages installed from Master Software Tools. |
| Size and Weight |
|
| Size: |
315 x 211 x 97 mm (12.4 x 8.3 x 3.8 in.) |
| Weight: |
4 kg (9 lbs) |
| Environmental |
|
| Operating: |
–10º C to 55º C, humidity 85% or less |
| Storage: |
–51º C to 71º C |
| Altitude: |
4600 meters, operating and non-operating |