Anritsu MS2724B HandHeld Spectrum Master Analyzer

• Anritsu MS2724B Spectrum Master (BC# 21097)
• TEX-RF-50-ZW Armored Test Port Cable
• (2) Ethernet Cables
• Kingston 4GB USB Drive
• N-Male To SMA-Female Adapter
• N-Male To BNC Adapter
• Spectrum Master Technical Data Sheet
• Anritsu Documentation DVD
• Master Software Tools
• (2) BNC To BNC Cables
• Car Charger
• Battery Pack
• AC Adapter/Charger
• Power Cord
• USB PC Interface Cable
• Hard Copy User Manual
• Strap For Unit
• Case For Unit
• Original Factory Box

 MS2724B
Spectrum Masterﾙ

The Anritsu MS2724B is the most advanced ultra-portable spectrum analyzer  on the market, featuring unparalleled performance at a modest price.

Introduction
Continuous frequency coverage from 9 kHz to 20 GHz gives the wireless professional the performance needed  for the most demanding measurements in harsh RF and physical environments. Whether you need spectrum monitoring, WiFi and WiFi5 installation and testing, RF and microwave signal  measurements or cellular signal measurements, the MS2724B Spectrum Master is the tool to make your job easier  and more productive.

High Performance Highlights
ﾕ 9 kHz to 20 GHz Input
ﾕ 1 Hz to 3 MHz RBW Range
ﾕ Very Low Phase Noise (ﾖ104 dBc/Hz typical at 10 kHz offset at 2 GHz)
ﾕ Built-in AM/FM/SSB Demodulator
ﾕ Built-in Preamplifier
ﾕ 65 dB Step Attenuator
ﾕ True RMS Detection
ﾕ 2+ Hours of Battery Life
ﾕ 3.4 kg (7.5 lb)
ﾕ 3G Modulation options
ﾕ GPS Receiver option
ﾕ Quasi-peak detector and CISPR bandwidths


Features and Options

Functions

• Multiple Marker: Display up to six markers on screen. Eachmarker includes a delta marker, effectively allowing up to 12 markers on screen. The user may also set marker 1 to be the reference for 6 delta markers.
• Marker Table: Display a table of up to six marker frequency and amplitude values plus delta marker frequency offset and amplitude.

Upper/Lower Limit

• Fixed and segmented: Each upper and lower limit can be made up of between one and 40 segments.

Smart Measurements

• Occupied Bandwidth: Measures 99% to 1% power channel of a signal. Channel Power: Measures the total power in a specified bandwidth.
• C/I: Measures carrier to interference ratio.
• ACPR: Measures power levels in the channels immediately above and  below the center channel.
• Field Strength: Uses antenna calibration tables to measure dBm/meter2or dBmV/meter.

SPECIFICATIONS:

 

Frequency
Frequency Range:	9 kHz to 20 GHz
Preamp	100 kHz to 4 GHz
Tuning Resolution:	1 Hz
Frequency Reference:	Aging: ±1 ppm per 10 years Accuracy: ±0.3 ppm (25 ºC ± 25 ºC) + aging
Frequency Span:	10 Hz to 20 GHz plus 0 Hz (zero span)
Span Accuracy:	Same as frequency reference accuracy
Sweep Time:	Zero span: 10 µs to 600s Spans >0 Hz: Sweep time is automatically optimized. Can be manually increased
Sweep Time Accuracy:	±2% in zero span
Sweep Trigger	Free run, Single, Video, External
Resolution Bandwidth:	(ﾖ3 dB) 1 Hz to 3 MHz in 1-3 sequence ±10%, 200 Hz, 9 kHz, 120 kHz when quasi-peak detector selected, 10MHz demodulation bandwidth
Video Bandwidth:	(ﾖ3 dB) 1 Hz to 3 MHz in 1-3 sequence
SSB Phase Noise: Offset from carrier: 10, 20 and 30 kHz 100 kHz 1 MHz 10 MHz	Max Max 9 kHz to 13 GHz              13 GHz to 20 GHz  ﾖ95 dBc/Hz ﾖ91 dBc/Hz  ﾖ97 dBc/Hz ﾖ93 dBc/Hz  ﾖ105 dBc/Hz ﾖ102 dBc/Hz ﾖ120 dBc/Hz ﾖ116 dBc/Hz
Amplitude
Measurement Range	: DANL to +30 dBm
Display Range:	1 to 15 dB/div in 1 dB steps. Ten divisions displayed.
Amplitude Units:	Log Scale Modes: dBm, dBV, dBmv, dBµV Linear Scale Modes: nV, µV, mV, V, kV, nW, µW, mW, W, kW
Attenuator Range	0 to 65 dB
Attenuator Resolution:	5 dB steps

For full Anritsu Spectrum Master MS2724B product specifications, please click here: Anritsu Spectrum Master MS2724B

Having trouble viewing this file? Click this link to download