Anritsu MT1000A Network Master Pro SM Fiber OTDR MU100020A Opt 2/10/20
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Anritsu MT1000A Network Master
Mobile Network I&M
- Mobile Fronthaul and Backhaul - Optical Loss, Reflectance and ORL Measurements
- Hybrid single mode fiber (1310 nm/1550 nm), multimode fiber (850 nm/1300 nm) models
- 3 wavelength single mode fiber model (1310 nm/1550 nm/1625 nm, 1310 nm/1550 nm/1650 nm)
- All-in-one OTDR, light source, optical power meter, visible light source (option)
- Multi-pulse measurement for high-accuracy event detection
- CPRI/OBSAI measurement with simultaneously installed Multi-rate Module MU100010A1/MU100011A
- Optical connector inspection with IEC 61300-3-35 Pass/Fail
- Easy-to-Use, Easy-to-Report
- Graphical summary and Pass/Fail evaluation using Fiber Visualizer function
- Intuitive touchscreen operation
- One button, comprehensive PDF report generation
Core and Metro Network Long Range I&M
- Easily test long fibers 100 km or more
- Three single mode fiber (1310 nm/1550 nm) models: Standard, Enhanced, High-Performance
- 3 wavelength single mode fiber (1310nm/1550nm/1625nm) model: High-Performance
- Automated file naming/file saving and fast data acquisition reduce testing times
- Construction OTDR mode for cable installation: Automated testing of multiple fibers at multiple wavelengths
FTTx and PON I&M
- Easily test PON Networks with up to 1×128 count splitters
- Multi-pulse measurement for high splitter loss measurement and high resolution testing
- Splitter identification by size with individual Pass/Fail
The worldwide spread of mobile devices, such as smartphones and tablets using SNS, video streaming, etc., is causing an explosive increase in data traffic volumes. Mobile network base stations are configured using various methods, but the antenna radio section uses an optical fiber to connect the BBU and RRH passing via a general interface called the CPRI/OBSAI. The need for optical fiber fault finding and transport quality tests increases as the Mobile network environment becomes more advanced.
Installing the 10G Multirate Module MU100010A1/100G Multirate Module MU100011A and OTDR Module MU100020A/21A/22A/23A in the Network Master Pro MT1000A supports all-in-one optical fiber fault finding and transport quality tests.
Using the MU100020A/21A/22A/23A, scratched or dirty connectors at fiber cable connections can be detected as fault locations from the excessive optical reflections to support fault finding and troubleshooting of Mobile optical networks. Additionally, work efficiency is greatly improved using the Fiber Visualizer function supporting Easy-to-Use/Easy-to-Report testing.
OTDR Module Applications
Generally, depending on the optical fiber measurement environment, OTDR measurements require multiple settings such as distance range, pulse width, measurement time, etc., making work difficult for technicians who do not generally use an OTDR. When performing Pass/Fail evaluation of an optical circuit for a report, a simple intuitive GUI is key to improving work efficiency.
The MU100020A/21A/22A/23A emphasizes easy-to-understand operability using three application measurement modes: OTDR Measurement, FTTA Measurement, and OLTS Measurement.
Standard OTDR Measurements
The OTDR measurement results are displayed as a trace showing the optical fiber length, losses, and size of reflections, as well as an easy-to-view summary of the analysis results on the Fiber Visualizer screen.
- Event icons showing characteristics of each connector, splice, and far end
- Pass/Fail evaluations based on user-settable threshold values
The user can set any threshold value for each event. If the Pass/Fail evaluation settings prescribed in the engineering manual are set beforehand, the measured optical fiber loss status can be easily distinguished visually at the same time as measurement ends.
FTTA Measurements
Comparatively short optical fibers of around several hundred meters in length are usually installed at the Mobile fronthaul FTTA. In this type of measurement environment, measurements made by different operators under different conditions commonly have inconsistency problems at later data processing.
At FTTA measurement, the optical fiber installation measurement conditions are fixed previously, so measurements are always made under the same conditions whoever is performing measurement.
Like the OTDR measurement function, each measurement result can be analyzed at the Trace and Fiber Visualizer screens.
Construction Measurements
The Construction mode measurement greatly simplifies through its innovative wizard. In particular, this is very effective function for user when multi-fibers construction is the task at hand. The ability to auto name and save the traces using a wizard, this allows the ability to adjust naming based on test direction, wavelength and fiber number. This minimizes the required user input especially on large fiber count cables which require testing on multiple wavelengths. Ensures no lost data and minimizes required input from the onsite engineers.
OLTS Measurements
At measurement of the optical Physical layer, the first basic measurement is loss measurement using a light source and power meter. With a built-in light source and power meter as standard, the MU100020A/21A/22A/23A can be used as an optical loss test set (OLTS). In addition, measurement results can be managed at the Loss Table for Pass/Fail evaluation of individual data based on set threshold values.
Specifications
OTDR Module MU100020A
|
Options |
MU100020A-020 |
MU100020A-021 |
MU100020A-022 |
|
Wavelength |
1310 nm/1550 nm ±25 nm |
||
|
Fiber Type |
Single Mode Fiber (SMF) |
||
|
Pulse Width |
3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000 ns |
||
|
Dynamic Range |
39 dB/37.5 dB |
42 dB/41 dB |
46 dB/46 dB 25 dB/25 dB (Pulse Width: 100 ns) |
|
Deadzone |
≤80 cm (typ.) |
||
|
Deadzone |
≤3.8 m/4.3 m |
||
OTDR Module MU100021A
|
Options |
MU100021A-021 |
|
|
Wavelength |
1310 nm/1550 nm ±25 nm |
850 nm/1300 nm ±30 nm |
|
Fiber Type |
Single Mode Fiber (SMF) |
GI Fiber |
|
Pulse Width |
3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000 ns |
850 nm: 1310 nm: |
|
Dynamic Range |
42 dB/41 dB |
29 dB/28 dB |
|
Deadzone |
≤80 cm (typ.) |
|
|
Deadzone |
≤3.8 m/4.3 m |
≤4.0 m/5.0 m |
OTDR Module MU100022A
|
Options |
MU100022A-022 |
|
Wavelength |
1310 nm/1550 nm/1625 nm ±25 nm |
|
Fiber Type |
Single Mode Fiber (SMF) |
|
Pulse Width |
3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000 ns |
|
Dynamic Range |
46 dB/46 dB/44 dB |
|
Deadzone |
≤80 cm (typ.) |
|
Deadzone |
≤3.8 m/4.3 m/4.8 m |
OTDR Module MU100023A
|
Options |
MU100023A-021 |
|
Wavelength |
1310 nm/1550 nm ±25 nm |
|
Fiber Type |
Single Mode Fiber (SMF) |
|
Pulse Width |
3, 10, 20, 50, 100, 200, 500, 1000, 2000, 4000, 10000, 20000 ns |
|
Dynamic Range |
42 dB/41 dB/35 dB |
|
Deadzone |
≤80 cm (typ.) |
|
Deadzone |
≤5.0 m/5.5 m/6.5 m |
Anritsu MT1000A Network Master Pro SM Fiber OTDR MU100020A
Options:
- 002 - Visual Fault Locator
- 010 - UPC Polish
- 020 - Standard Dynamic Range
Dynamic Range:
1310 / 1550 nm : 39 / 37.5 dB
Visual Fault Locator
Includes Carrying Case & Accessories As Listed Above
MT 1000A MT1000 A MT 1000 A MT-1000 A MT-1000A
Anritsu MT1000A Access Master MT-1000A OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Anritsu MT1000A Network Master Pro SM Fiber OTDR MU100020A
- Options:
- 002 - Visual Fault Locator
- 010 - UPC Polish
- 020 - Standard Dynamic Range
- SM OTDR Source:
- 1310nm
- 1550nm
- SC Connector For Source
- Options:
- (2) SM SC-SC Fiber Cables
- (4) Fiber Wipes
- AC Adapter/Charger
- Power Cord
- Ethernet Cable
- USB PC interface Cable
- User Manual On CD-ROM
- Hard Carrying Case