Anritsu CellMaster MT8212B Base Station Analyzer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Anritsu CellMaster MT8212B Cable, Antenna and Base Station Analyzer w/ Options: (BC# 34009-L/T*)
- Option 21: Transmission 34009
- Option 50: T1 / E1 Analyzer
- (2) BNC Cables
- DC Car Charger
- AC Adapter/Charger
- Power Cord
- RS232 PC interface Cable
- Hard Copy User Manual
- Carrying Case (G)
Anritsu MT8212B Cell Master - Base Station Test Tool
The Anritsu Cell Master MT8212B is a hand held cable and antenna analyzer power meter and spectrum analyzer that includes a keypad to enter data and a color lcd to provide graphic information of various measurements.
The Cell Master is capable of up to 1.5 hours of continuous operation from a fully charged field-replaceable battery and can be operated from a 12V dc source. Built-in energy conservation features can be used to extend battery life.
The Anritsu MT8212B is designed for measuring SWR, return loss, cable insertion loss and locating faulty RF components in antenna systems, and includes spectrum analysis capabilities with carrier-to-interference analysis.
The displayed trace can be scaled or enhanced with frequency markers or limit lines. A menu option provides for an audible "beep" when the limit value is exceeeded. The LCD brightness can be adjusted for optimum visibility in varying environments.
Anritsu MT8212B Cable and Antenna Analyzer
| Frequency Range | 25MHz to 4GHz | |
| Frequency Accuracy | ± 75ppm @ + 25 °C | |
| Frequency Resolution | 100kHz | |
| Output Power | < 0 dBm (-10 dBm nominal) | |
| Immunity to Interfering Signals | on channel +17 dBm; on frequency -5dBm | |
| Measurement Speed | = 3.5msec / data point (CW ON) | |
| Number of data points | 130, 259, 517 | |
| Return Loss | Range: | 0.00 to 60.00 dB |
| Resolution: | 0.01 dB | |
| VSWR | Range: | 1.00 to 65.00 |
| Resolution: | 0.01 | |
| Cable Loss | Range: | 0.00 to 30.00 dB |
| Resolution: | 0.01 dB | |
| Measurement Accuracy | >42dB corrected directivity after calibration | |
| DISTANCE-TO-FAULT | ||
| Vertical Range | Return Loss: | 0.00 to 60.00 dB |
| VSWR: | 1.00 to 65.00 | |
| Horizontal Range | 0 to (# of data pts ﾖ1) x Resolution to a maximum of 1197 m (3929 ft), # of data pts = 130, 259 or 517 |
|
Anritsu MT8212B Spectrum Analyzer
| Frequency Range | 100 kHz to 3.0 GHz (tuneable to 9 kHz) | |
| Frequency Reference (Internal Timebase) | Aging: | ±1 ppm/yr |
| Accuracy: | ±2 ppm | |
| Frequency Span | 10 Hz to 2.99 GHz in 1, 2, 5 step selections in auto mode, plus zero span | |
| Sweep Time | =1.3 sec full span; =50 µsec to 20 sec zero span | |
| Resolution Bandwidth (ﾖ3 dB) | 100 Hz to 1 MHz in 1-3 sequence ±5% Accuracy | |
| Video Bandwidth (ﾖ3 dB) | 3 Hz to 1 MHz in 1-3 sequence | |
| SSB Phase Noise (1 GHz) @ 30 kHz Offset | =ﾖ75 dBc/Hz | |
| Spurious Responses Input Related | =ﾖ75 dBc/Hz | |
| Spurious Residual Responses | =ﾖ90 dBm, =10 MHz | |
| =ﾖ80 dBm, <10 MHz | ||
| (10 kHz RBW, pre-amp on) | ||
| AMPLITUDE | ||
| Total Level Accuracy | ±1 dB typical (±1.5 dB max), =10 MHz to 3 GHz | |
| ±2 dB typical <10 MHz for input signal levels ﾖ60 dBm, excluding input VSWR mismatch | ||
| Dynamic Range | >65 dB, typical | |
| Display Range | 1 to 15 dB/division, in 1 dB steps, 10 divisions displayed | |
| Scale Units | dBm, dBV, dBmV, dBµV, V, W | |
| RF Input VSWR | (with =20 dB atten.) 1.5:1 typical, (10 MHz to 2.4 GHz) | |
Anritsu MT8212B Power Meter:
| Frequency Range | 4.5 MHz to 3.0 GH |
| Display Range | ﾖ80 dBm to +80 dBm |
| Measurement Range | ﾖ80 dBm to +20 dBm (+80 dBm with external attenuator) |
| Offset Range | 0 to +60 dB |
| Accuracy | ±1 dB typical (±1.5 dB max), =10 MHz to 3 GHz |
| ±2 dB typical <10 MHz | |
| VSWR | 1.5:1 typical (Pin > ﾖ30 dBm, >10 MHz to 2.4 GHz) |
| Maximum Power | +20 dBm (0.1W) without external attenuator |
For full Anritsu Cell Master MT8212B product specifications, please click here: Anritsu Cell Master MT8212B