Anritsu Cell Master MT8213E Base Station Analyzer w/ Opts: 10/19/21/25/27/31/33/34/42/43/62/63/90/431/541/542 MT8213
$22,479.00
Availability:
In stock
SKU
9S143
Condition: Refurbished / Calibrated
Warranty: 1 Year Warranty
Anritsu MT8213E Base Station Analyzer
Anritsu introduces its latest generation compact handheld Base Station Analyzer for installation and maintenance of wireless networks. Designed as a lightweight base station analyzer meeting virtually all the testing needs of an RF technician, the Cell Master features Signal Analyzer options for 2G, 3G, and 4G cellular networks including LTE, WiMAX, and digital broadcast.
Cable and Antenna Analyzer Highlights
- Measurements: RL, VSWR, Cable Loss, DTF, Phase
- 2-port Transmission Measurement: High/Low Power
- Sweep Speed: 1 ms/data point, typical
- Display: Single or Dual Measurement Touchscreen
- Calibration: OSL, InstaCal™, and FlexCal™
- Bias Tee: 32 V internal
Spectrum and Interference Analyzer Highlights
- Measurements: Occupied Bandwidth, Channel Power, ACPR, C/I
- Interference Analyzer: Spectrogram, Signal Strength, RSSI, Interference Mapping
- Dynamic Range: > 102 dB in 1 Hz RBW • DANL: –162 dBm in 1 Hz RBW
- Phase Noise: –100 dBc/Hz max @ 10 kHz offset at 1 GHz
- Frequency Accuracy: ± 50 ppb with GPS On
Capabilities and Functional Highlights
- LTE/LTE-A FDD/TDD; MIMO (2x2, 4x4)
- NB-IoT measurements
- GSM/EDGE
- W-CDMA/HSPA+
- TD-SCDMA/HSPA+
- CDMA, EV-DO
- Fixed, Mobile WiMAX
- EMF Test
- USB Power Sensors up to 50 GHz
- Coverage Mapping
- 3 hour battery operation time
- USB or Ethernet data transfer
- PIM Alert Application
- PIM Hunting
- ISDB-T, ISDB-T SFN
- DVB-T/H, DVB-T/H SFN
- Interference Analyzer
- GPS information on stored traces
- Built-in Bias Tee
- Internal Power Meter
- High Accuracy Power Meter
- Master Software Tools™
- Line Sweep Tools™
- easyTest Tools™
- Web Remote Control with Ethernet
Specifications:
| Cable and Antenna Analyzer | |
| Measurements | VSWR Return Loss Cable Loss Distance-to-Fault (DTF) Return Loss Distance-to-Fault (DTF) VSWR 1-Port Phase Smith Chart (50/75 Ω selectable) |
| Setup Parameters | |
| Measurement display | Single/Dual Measurement Display with independent markers |
| Frequency | Start/Stop, Signal Standard, Start Cal |
| DTF | Start/Stop, DTF Aid, Units (m/ft), Cable Loss, Propagation Velocity, Cable, Windowing |
| Windowing | Rectangular, Normal Side Lobe, Low Side Lobe, Minimum Side Lobe |
| Amplitude | Top, Bottom Auto Scale, Full Scale |
| Sweep | Run/Hold, Single/Continuous, RF Immunity (High/Low), Data Points, Averaging/Smoothing, Output Power (High/Low), RF Pwr When Hold (On/Off) |
| Data Points | 137, 275, 551, 1102, 2204 |
| Markers | Markers 1-6 (On/Off), Delta Makers 1-6 (On/Off), Marker to Peak/Valley, Peak/Valley Auto, Marker Table (On/Off), All Markers Off |
| Traces | Recall, Copy to Display Memory, No Trace Math, Trace ± Memory, (Trace + Memory)/2, and Trace Overlay (On/Off) |
| Limit line | On/Off, Single Limit, Multi-segment Edit, Limit Alarm (On/Off), Pass Fail Message (On/Off), Pass/Fail (Unbounded/Bounded), Warning Limit Offset, Clear Limit |
| Calibration | Start Cal, Cal Type (Standard/FlexCalä), Disp Valid Cal Temp Range |
| Save | Setups (.stp), Measurements (.dat, .vna, .csv*), Screen Shots (.jpg) *Requires V4.00 firmware or higher |
| Recall | Setups (.stp), Measurements (.dat, .vna) |
| Frequency | |
| Frequency range | 2 MHz to 6 GHz |
| Frequency accuracy | ≤ ± 2.5 ppm @ 25 ºC |
| Frequency resolution | 1 kHz (RF immunity low), 100 kHz (RF immunity high) |
| Output power | |
| High | 0 dBm, typical |
| Low | 2 MHz to 1.5 GHz: –40 dBm, typical >1.5 GHz to 6 GHz: –30 dBm, typical |
| Interference immunity | |
| On-Channel | +17 dBm @ > 1.0 MHz from carrier frequency |
| On-Frequency | 0 dBm within ± 10 kHz of the carrier frequency |
| Measurement Speed | |
| Return Loss | ≤ 1.00 ms/data point, RF immunity low, typical |
| Distance-to-fault | < 1.25 ms/data point, RF immunity low, typical |
| Return Loss | |
| Measurement range | 0 dB to 60 dB |
| Resolution | 0.01 dB |
| VSWR | |
| Measurement range | 1:1 to 65:1 |
| Resolution | 0.01 |
| Cable Loss | |
| Measurement range | 0 dB to 30 dB |
| Resolution | 0.01 dB |
| Distance-to-fault | |
| Vertical range return loss | 0 dB to 60 dB |
| Vertical range VSWR | 1:1 to 65:1 |
| Fault resolution (meters) | (1.5 x 108 x vp) / ΔF (vp = velocity propagation constant, ΔF is F2–F1 in Hz) |
| Horizontal range (meters) | 0 to (Data Points–1) x Fault Resolution, to a maximum of 1500 m (4921 ft) |
| 1-Port Phase | |
| Measurement range | –180º to +180º |
| Resolution | 0.01° |
| Measurement accuracy | |
| Corrected directivity | > 42 dB, OSL Calibration > 38 dB, InstaCal™ Calibration |
| Spectrum Analyzer | |
| Measurements | Field Strength (uses antenna calibration tables to measure dBm/m2,
dBmV/m, dBV/m, dBμV/m, Volt/m, Watt/m2, dBW/m2, A/m, dBA/m and Watt/cm2)
Occupied Bandwidth (measures 99 % to 1 % power channel of a signal) Channel Power (measures the total power in a specified bandwidth) ACPR (adjacent channel power ratio) AM/FM/SSB Demodulation (wide/narrow FM, USB and LSB), (audio out only) C/I (carrier-to-interference ratio) Emission Mask Coverage Mapping (requires Option 431) PIM Alert Application (available for download) PIM Hunting |
| Setup Parameters | |
| Frequency | Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #, Channel Increment |
| Amplitude | Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection |
| Span | Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span |
| Bandwidth | RBW, Auto RBW, VBW, Auto VBW, RBW/VBW, Span/RBW |
| File | Save, Save-on-Event, Recall, Copy, Delete |
| Save | Setups, Measurements, Screen Shots (JPEG), Limit Lines, Spurious Emission Mask |
| Save-on-Event | Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All |
| Recall | Setups, Measurements, Limit Lines, Spurious Emission Mask |
| Copy | Selected file or files to internal/external memory (USB) |
| Delete | Selected file or files from internal/external memory (USB) |
| Application options | Bias-Tee (On/Off), Impedance (50 Ω, 75 Ω, Other) |
| Sweep Functions | |
| Sweep | Single/Continuous, Sweep Mode (Fast, Performance, No FFT), Reset, Detection, Minimum Sweep Time, Trigger Type, Gated Sweep (see Option 90) |
| Detection | Peak, RMS, Negative, Sample, Quasi-peak |
| Triggers | Free Run, External, Video, Change Position, Manual |
| Trace Functions | |
| Traces | Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations |
| Trace A Operations | Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace) |
| Trace B Operations | A → B, B ↔ C, Max Hold, Min Hold |
| Trace C Operations | A → C, B ↔ C, Max Hold, Min Hold, A – B → C, B – A → C, Relative Reference (dB), Scale |
| Marker Functions | |
| Markers | Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers, Marker Table (On/Off), All Markers Off |
| Marker types | Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker |
| Marker auto-position | Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel, Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level |
| Marker table | 1-6 markers frequency and amplitude plus delta markers frequency amplitude and offset |
| Limit Line Functions | |
| Limit lines | Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit |
| Limit line edit | Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right |
| Limit line move | To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1 |
| Limit line envelope | Create Envelope, Update Amplitude, Points (41 max), Offset, Shape Square/Slope |
| Limit line advanced | Type (Absolute/Relative), Mirror, Save/Recall |
| Frequency | |
| Frequency range | 9 kHz to 6 GHz |
| Tuning resolution | 1 Hz |
| Frequency reference | Aging: ± 1.0 ppm/year Accuracy: ± 1.5 ppm (25 °C ± 25 °C) + aging, < ± 50 ppb with GPS On |
| Frequency span | 10 Hz to 6 GHz including zero span |
| Sweep time | Minimum 100 ms, 7 µs to 3600 s in zero span |
| Sweep time accuracy | ± 2 % in zero span |
| Bandwidth | |
| Resolution bandwidth (RBW) | 1 Hz to 3 MHz in 1–3 sequence ± 10% (1 MHz max in zero-span) (–3 dB bandwidth) |
| Video bandwidth (VBW) | 1 Hz to 3 MHz in 1–3 sequence (–3 dB bandwidth) |
| RBW with Quasi-peak detection | 200 Hz, 9 kHz, 120 kHz (–6 dB bandwidth) |
| VBW with Quasi-peak detection | Auto VBW is On, RBW/VBW = 1 |
| Spectral Purity | |
| SSB Phase Noise @ 1 GHz | –100 dBc/Hz, –110 dBc/Hz typical @ 10 kHz offset –105 dBc/Hz, –112 dBc/Hz typical @ 100 kHz offset –115 dBc/Hz, –121 dBc/Hz typical @ 1 MHz offset |
| Amplitude Ranges | |
| Dynamic Range | > 102 dB (2.4 GHz), 2/3 (TOI-DANL) in 1 Hz RBW |
| Measurement Range | DANL to +26 dBm (≥ 50 MHz) DANL to 0 dBm (< 50 MHz) |
| Display Range | 1 dB to 15 dB/div in 1 dB steps, ten divisions displayed |
| Reference Level Range | –150 dBm to +30 dBm |
| Maximum Continuous Input Power | +30 dBm |
| Attenuator Range | 0 dB to 55 dB in 5 dB steps |
| Amplitude Units | Log Scale Modes: dBW, dBm, dBμW, dBV, dBmV, dBμV, dBA, dBmA, dBμA Linear Scale Modes: nV, μV, mV, V, kV, nW, μW, mW, W, kW, nA, μA, mA, A |
| Amplitude Accuracy | 9 kHz to 100 kHz ± 2.00 dB typical (Preamp Off) 100 kHz to 4.0 GHz ± 1.25 dB, ± 0.5 dB typical > 4.0 GHz to 6 GHz ± 1.50 dB, ± 0.5 dB typical |
| Displayed Average Noise Level (DANL) | 10 MHz to 2.4 GHz Max: –141 dBm Typical: –146 dBm Preamp off: Max:
–157 dBm Typical: –162 dBm > 2.4 GHz to 4 GHz Max: –137 dBm Typical: –141 dBm Preamp off: Max:–154 dBm Typical: –159 dBm > 4 GHz to 5 GHz Max: –134 dBm Typical: –138 dBm Preamp off: –150 dBm Typical: –155 dBm > 5 GHz to 6 GHz Max: –126 dBm Typical: –131 dBm Preamp off:–143 dBm Typical: –150 dBm |
| Spurs | |
| Residual Spurious | < –90 dBm (RF input terminated, 0 dB input attenuation, > 10 MHz) |
| Input-Related Spurious | < –75 dBc (0 dB attenuation, –30 dBm input, span < 1.7 GHz, carrier offset > 4.5 MHz) |
| Exceptions, typical | < –70 dBc @ < 2.5 GHz, with 2072.5 MHz Input < –68 dBc @ F1 – 280 MHz with F1 Input < –70 dBc @ F1 + 190.5 MHz with F1 Input < –52 dBc @ 7349 – (2F2) MHz, with F2 Input, where F2 < 2437.5 MHz < –55 dBc @ 190.5 ± (F1/2) MHz, where F1 < 1 GHz |
| Third-Order Intercept (TOI) | 800 MHz +16 dBm 2400 MHz +20 dBm 200 MHz to 2200 MHz +25 dBm, typical > 2.2 GHz to 5.0 GHz +28 dBm, typical > 5.0 GHz to 6.0 GHz +33 dBm, typical |
| Second Harmonic Distortion | |
| 50 MHz | –56 dBc |
| > 50 MHz to 200 MHz | –60 dBc, typical |
| > 200 MHz to 3000 MHz | –70 dBc, typical |
| VSWR | 2:1, typical |
Anritsu Cell Master MT8213E Base Station Analyzer
Installed Options:
- Option 10: Bias Tee
- Option 19: Power Meter (Requires External Sensor)
- Option 21: 2-Port Transmission
- Option 25: Interference Analyzer
- Option 27: Channel Scanner
- Option 31: GPS Receiver (Requires P/N: 2000-1528-R GPS Antenna)
- Option 33: OTA CDMA Signal Analyzer
- Option 34: OTA EVDO Signal Analyzer
- Option 42: RF - CDMA
- Option 43: Demodulation - CDMA Signal Analyzers
- Option 62: RF - EVDO
- Option 63: Demodulation - EVDO Signal Analyzers
- Option 90: Gated Sweep
- Option 431: Coverage Mapping
- Option 541: LTE Channel Power Accuracy Tests
- Option 542: LTE Frequency Error Tests
Frequency Range: 9 kHz to 6 GHz
Includes Carrying Case & Accessories As Listed
BC# -L/T*
Anritsu MT8213E MT-8213E Cell Master Base Station Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
- Anritsu Cell Master MT8213E Base Station Analyzer w/ Options: (BC# -L/T*)
- Option 10: Bias Tee
- Option 19: Power Meter (Requires External Sensor)
- Option 21: 2-Port Transmission
- Option 25: Interference Analyzer
- Option 27: Channel Scanner
- Option 31: GPS Receiver (Requires P/N: 2000-1528-R GPS Antenna)
- Option 33: OTA CDMA Signal Analyzer
- Option 34: OTA EVDO Signal Analyzer
- Option 42: RF - CDMA
- Option 43: Demodulation - CDMA Signal Analyzers
- Option 62: RF - EVDO
- Option 63: Demodulation - EVDO Signal Analyzers
- Option 90: Gated Sweep
- Option 431: Coverage Mapping
- Option 541: LTE Channel Power Accuracy Tests
- Option 542: LTE Frequency Error Tests
- User Manual On CD-ROM
- Carrying Case (G)
Request a Quote for