Anritsu S820C Cable Antenna Analyzer 3.3 to 20 GHz
$6,895.00
Availability:
Out of stock
SKU
6C165
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Request a Quote for
Anritsu Site Master S820C Microwave Transmission Line and Antenna Analyzer
The Leading Microwave Transmission Line Tester
Anritsu’s hand held, battery operated Microwave Site Master is the most accurate and convenient tool available for field installation, verification, troubleshooting and repair of microwave communication systems. Difficult test specifications become easy to verify. The S800 “C” Series improves quality and reduces maintenance expenses by providing vector corrected measurements via calibration and a convenient user interface.
Microwave Site Master targets microwave site installers, point-to-point operators, point-to-multipoint operators, radio manufacturers, PCS/Cellular operators, utility companies and private/public networks that support microwave links. These microwave Site Master models test both waveguide and coaxial cables more conveniently than laboratory sized scalar analyzers or microwave test sets.
Vector Error Correction
Vector error correction within the S800 “C” Series improves the quality and convenience of measurements compared to traditional scalar techniques. Accuracy and repeatability are enhanced as errors such as test port match and source match are accounted for.
Waveguide Calibration
The test port connection to the waveguide under test is a small coaxial-to-waveguide adapter rather than a bulky coupler.
The calibration components include two offset shorts, 1 /8 and 3 /8wave-length, and a precision waveguide load. The two offset shorts eliminate reference error suffered by scalar systems where only a single waveguide short is used to determine the 0.0 dB reflection reference level. Site Master’s flange design mates to square, rectangular or circular flanges. For a given waveguide size, only one calibration set is required. Site Master’s waveguide calibration components are built with precision alignment pins that mate the companion coaxial-to-waveguide adapters. As a result, proper alignment to the waveguide is fast and convenient.
Waveguide Dispersion
Vector error correction also improves the quality of Distance-To-Fault data. Not only is the reflection magnitude more accurate, but the waveguide dispersion correction for fault location (different frequencies propagate at different speeds) is more accurate and repeatable. The post-vector corrected data accounts for the non-dispersive length of coaxial cable preceding the input of the waveguide under test. Unlike scalar-based systems, the Microwave Site Master S800 “C” Series does not suffer reflection magnitude errors and length inaccuracies in proportion to the relative lengths of the coaxial input cable and waveguide under test.
Tune Mode
Tune Mode is a fast sweep mode used to quickly tune the waveguide by adjusting the flange connectors quickly at both ends of the waveguide.
There are three levels of resolution available for tune mode; 65, 43, and 33 data points. The higher the number of data points, the greater the measurement resolution.
Easy-to-Use
Site Master’s S800 “C” Series menu driven interface requires little training and simplifies the field engineers’ and technicians’ task of deployment, site-to-site maintenance and trouble-shooting by identifying, recording and solving problems without sacrificing measurement accuracy.
Powerful data analysis software comes with every Site Master unit, providing users with an easy method of analyzing system performance, trends and problems in addition to professional report generation.
Accurate, Repeatable Measurements
Utilizing vector error correction, Site Master delivers accurate, reliable and repeatable Return Loss/VSWR and Fault Location measurements. Site Master’s high immunity to interference allows users to conduct measurements of an active site without loss of accuracy
Measurement Accuracy
Directivity is the largest source of return loss measurement uncertainty. The quality of the load or termination used for calibration determines directivity performance. Loads can be verified using a vector network analyzer calibrated with either sliding load or TRL.
Features:
Specifications:
For full Anritsu Site Master S820C product specifications, please click here: Anritsu Site Master S820C
The Leading Microwave Transmission Line Tester
Anritsu’s hand held, battery operated Microwave Site Master is the most accurate and convenient tool available for field installation, verification, troubleshooting and repair of microwave communication systems. Difficult test specifications become easy to verify. The S800 “C” Series improves quality and reduces maintenance expenses by providing vector corrected measurements via calibration and a convenient user interface.
Microwave Site Master targets microwave site installers, point-to-point operators, point-to-multipoint operators, radio manufacturers, PCS/Cellular operators, utility companies and private/public networks that support microwave links. These microwave Site Master models test both waveguide and coaxial cables more conveniently than laboratory sized scalar analyzers or microwave test sets.
Vector Error Correction
Vector error correction within the S800 “C” Series improves the quality and convenience of measurements compared to traditional scalar techniques. Accuracy and repeatability are enhanced as errors such as test port match and source match are accounted for.
Waveguide Calibration
The test port connection to the waveguide under test is a small coaxial-to-waveguide adapter rather than a bulky coupler.
The calibration components include two offset shorts, 1 /8 and 3 /8wave-length, and a precision waveguide load. The two offset shorts eliminate reference error suffered by scalar systems where only a single waveguide short is used to determine the 0.0 dB reflection reference level. Site Master’s flange design mates to square, rectangular or circular flanges. For a given waveguide size, only one calibration set is required. Site Master’s waveguide calibration components are built with precision alignment pins that mate the companion coaxial-to-waveguide adapters. As a result, proper alignment to the waveguide is fast and convenient.
Waveguide Dispersion
Vector error correction also improves the quality of Distance-To-Fault data. Not only is the reflection magnitude more accurate, but the waveguide dispersion correction for fault location (different frequencies propagate at different speeds) is more accurate and repeatable. The post-vector corrected data accounts for the non-dispersive length of coaxial cable preceding the input of the waveguide under test. Unlike scalar-based systems, the Microwave Site Master S800 “C” Series does not suffer reflection magnitude errors and length inaccuracies in proportion to the relative lengths of the coaxial input cable and waveguide under test.
Tune Mode
Tune Mode is a fast sweep mode used to quickly tune the waveguide by adjusting the flange connectors quickly at both ends of the waveguide.
There are three levels of resolution available for tune mode; 65, 43, and 33 data points. The higher the number of data points, the greater the measurement resolution.
Easy-to-Use
Site Master’s S800 “C” Series menu driven interface requires little training and simplifies the field engineers’ and technicians’ task of deployment, site-to-site maintenance and trouble-shooting by identifying, recording and solving problems without sacrificing measurement accuracy.
- Store ten test setups for fast, repeatable testing
- Store up to 200 measurement traces in nonvolatile memory
- Multilingual user interface features on screen menus and messages in 7 different languages – English, German, French, Spanish, Portuguese, Chinese, and Japanese.
Powerful data analysis software comes with every Site Master unit, providing users with an easy method of analyzing system performance, trends and problems in addition to professional report generation.
Accurate, Repeatable Measurements
Utilizing vector error correction, Site Master delivers accurate, reliable and repeatable Return Loss/VSWR and Fault Location measurements. Site Master’s high immunity to interference allows users to conduct measurements of an active site without loss of accuracy
Measurement Accuracy
Directivity is the largest source of return loss measurement uncertainty. The quality of the load or termination used for calibration determines directivity performance. Loads can be verified using a vector network analyzer calibrated with either sliding load or TRL.
Features:
- Accurately tests coaxial cable/waveguide transmission line and antennas
- Tune mode for waveguide component alignment/testing
- Superior immunity to live site RF interference
- Clearly defined user interface for coaxial cable and waveguide media
- Pop up menus for cable list, waveguide list and compatible flange list
- Quickly select cable/waveguide type and test parameters without setup error
- Large, high resolution display allows for easy viewing and trace interpretation under a variety of conditions
Specifications:
Frequency Range | 3.3 to 20 GHz |
Frequency Accuracy (CW mode) | ±75 ppm @ +25°C |
Display Resolution | 130, 259, 517 data points |
Immunity to interfering signals | –10 dBm |
Return Loss | Range: 0 to 54 dB Resolution: 0.01 dB |
SWR | Range: 1 to 65 Resolution: 0.01 |
Distance-to-Fault | Vertical range: Return loss: 0 to 54 dB Horizontal range (meter): 0 to (data points –1) x resolution to a maximum of 1000 m (3281 ft.) where data points = 130, 259, 517 Horizontal resolution, rectangular windowing for coaxial cble (meter): (1.5 x 108 ) (υρ)/? frequency |
Coax/Waveguide Insertion Loss | Range: 0 to 54 dB Resolution: 0.01 dB |
Test port connector | Precision K(f) or N(f |
RF power monitor, (Option 5) | Display range: –80 to +80 dBm Detector range: –45 to +20 dBm, 30nW to 100 mW Offset range: 0 to +60 dB Resolution: 0.1 dB, 0.1 x W |
Maximum input without damage | K(f) test port: + 27 dBm |
Trace memory | up to 200 traces |
Instrument configuration with calibration memory | 10 states |
Custom cable configuration memory | 50 configurations |
Temperature | Operating: 0 to 50?C Storage: –20?C to 75?C |
Weight | 1.89 kgs (4.2 lbs.) |
Size | 25.4 x 17.8 x 6.10 cm (10 x 7 x 2.4 in.) |
General | Electromagnetic compatibility: Meets European community CE requirements RS232: 9 pin D-sub, three wire serial |
For full Anritsu Site Master S820C product specifications, please click here: Anritsu Site Master S820C
Anritsu Site Master S820C 3.3 GHz to 20 GHz Cable & Antenna Analyzer
Installed Options:
- 5: RF Power Meter
- 11NF: N Female Test Port Connector
Includes Open/Short/Load, Carrying Case & Accessories As Listed
S820 C S-820C
Anritsu S820C S-820C SiteMaster Cable Antenna Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 32289
- Anritsu Site Master S820C Cable & Antenna Analyzer (BC# 32289-L/T*) w/ Options:
- 5: RF Power Meter
- 11NF: N Female Test Port Connector
- N Type To Mini Test Port Cable Grey
- Agilent Open 85052-600009
- Agilent Load 00902-600004
- HP Short 85052-600007
- Male To Male Mini Adapter
- DC Car Charger
- Battery Pack
- AC Adapter/Charger
- Power Cord
- RS232 PC Interface Cable
- User Manual On CD-ROM
- Carrying Case