Anritsu MT1000A Network Master Pro Network Tester w/ 100G Multirate Module
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Anritsu MT1000A Network Master Pro Network Tester (BC# -L/T*)
- Anritsu 100G Multirate Module (BC# -L/T*)
- (MU100011A)
- Ethernet Cable
- AC Adapter/Charger
- Power Cord
- Carrying Case (G)
Anritsu MT1000A Network Master Pro Network Tester w/ 100G Multirate Module
The Anritsu MT1000A Network Master Pro with 100G Multirate Module is a portable communications network tester used to install, verify, and troubleshoot network connections. It combines the MT1000A’s battery-powered platform with the MU100011A 100G Multirate Module, allowing technicians to evaluate supported connections at speeds ranging from 10 Mbps to 100 Gbps. Available capabilities depend on the installed options and transceivers.
The tester generates and analyzes network traffic to check whether a connection delivers its expected performance. Supported Ethernet tests include throughput, frame loss, latency, and bit-error measurements. These measurements help technicians identify problems such as dropped traffic, transmission errors, or insufficient capacity before a service is handed over to a customer.
With the appropriate licenses, the system supports standardized service verification methods such as RFC 2544 and ITU-T Y.1564. These tests evaluate network performance against defined requirements and help confirm that configured services operate correctly. Additional functions, including ping, traceroute, and multistream testing, support troubleshooting and assessment of multiple traffic streams.
The multirate module can also support technologies beyond Ethernet, including Optical Transport Network (OTN), Fibre Channel, and mobile fronthaul interfaces, depending on configuration. This flexibility allows technicians to use one platform across different communications systems. Its modular design also supports expansion with separate measurement modules for other tasks, such as optical fiber testing.
The MT1000A with the 100G module helps network operators and service teams confirm that links are ready for use and investigate faults when performance declines. Its portable design makes it suitable for testing at customer sites, equipment rooms, and network facilities. By combining traffic generation, performance analysis, and service verification, it provides practical evidence of how a connection performs under test.
Features:
- Multirate network testing: Supports connections from 10 Mbps to 100 Gbps.
- High-speed Ethernet testing: Supports 10G, 25G, 40G, and 100G configurations.
- Traffic generation and analysis: Sends test traffic and measures network performance.
- Throughput measurement: Checks how much traffic a connection can carry.
- Frame-loss and latency testing: Measures dropped frames and transmission delay.
- Bit-error-rate testing: Detects transmission errors.
- RFC 2544 benchmarking: Evaluates Ethernet performance.
- ITU-T Y.1564 service testing: Verifies configured Ethernet services.
- Multistream testing: Evaluates multiple traffic streams.
- IP troubleshooting: Supports IPv4/IPv6, ping, and traceroute.
- Transport-network testing: Supports optional OTN, SDH/SONET, and Fibre Channel capabilities.
- Mobile fronthaul testing: Supports optional CPRI, OBSAI, and eCPRI/RoE functions.
- Synchronization testing: Offers optional SyncE and IEEE 1588v2 capabilities.
- Portable, battery-powered operation: Suitable for field installation and maintenance.
- Modular expansion: Accepts additional modules, including a separate OTDR module for fiber testing.
| Specification | Anritsu MT1000A with 100G Multirate Module |
|---|---|
| Brand | Anritsu |
| Main instrument | MT1000A Network Master Pro |
| Measurement module | MU100011A 100G Multirate Module |
| Instrument type | Portable communications network tester |
| Supported network speeds | 10 Mbps to 100 Gbps, depending on options |
| Copper Ethernet rates | 10/100/1000 Mbps |
| Optical Ethernet rates | 1G, 10G, 25G, 40G, 100G |
| Optical transceiver formats | SFP, SFP+, SFP28, QSFP+, QSFP28, CFP4 |
| Copper Ethernet interface | RJ45 |
| Ethernet measurements | Throughput, frame loss, latency, bit-error rate |
| Ethernet service testing | RFC 2544 and ITU-T Y.1564 |
| Traffic testing | Traffic generation, analysis, and multistream testing |
| IP functions | IPv4/IPv6, ping, traceroute |
| Network encapsulation support | VLAN, MPLS, MPLS-TP, PBB |
| OTN testing | Available with appropriate options |
| SDH/SONET testing | Available with appropriate options |
| Fibre Channel testing | Available with appropriate options |
| Mobile fronthaul testing | CPRI, OBSAI, eCPRI/RoE options |
| Synchronization testing | SyncE and IEEE 1588v2 options |
| Display | 9-inch color touchscreen |
| Display resolution | 800 × 480 pixels |
| Power operation | Rechargeable battery or external power |
| Required platform option | MT1000A-006 for MU100011A |
| OTDR functionality | Requires a separate compatible OTDR module |