Corning Siecor iLID SM MM Fusion Splicer CDS LID

iLID Fusion Splicer

With its many features, the iLID splice system meets the maximum requirements and is the top of the line in the Corning splice system families. Equipped with all the technologies currently used in Corning field fusion splicers, the iLID represents the perfect solution for all single-fiber applications with highest demands. Aside from the greatest possible operator friendliness and maximum range of equipment, the fusion splicer also unifies in itself all of the requirements for a high-speed, dependable, compact, rugged and high-precision field fusion splicer. The integrated PC and the integrated GPS system offer a degree of operator friendliness and equipment features previously inconceivable in the field of fusion splicers.

With its many features, the iLID splice system meets the maximum requirements and is the top of the line in the Corning splice system families. Equipped with all the technologies currently used in Corning field fusion splicers, the iLID represents the perfect solution for all single-fiber applications with highest demands. Aside from the greatest possible operator friendliness and maximum range of equipment, the fusion splicer also unifies in itself all of the requirements for a high-speed, dependable, compact, rugged and high-precision field fusion splicer. The integrated PC and the integrated GPS system offer a degree of operator friendliness and equipment features previously inconceivable in the field of fusion splicers.

The new integrated CDSﾙ splice process control system offers an alternative, very rapid system for core-to-core alignment of fibers which are not supposed to be processed with the LID-Systemﾙ. With this system, the speed of the splice process can be reduced to a few seconds. The system achieves splendid splicing results for current fibers with a high core-cladding concentricity.

The familiar L-PASﾙ is employed for quick prealignment, endface evaluation, contamination detection and for fiber position analysis.


Applications
 

• For splicing all common single- and multimode glass fibers as well as special fiber types (titanium coated, LS, DS and NZDS fibers such as TrueWaveﾙ and LEAFﾙ, for example)
• For Telco, CATV, Long-Haul, Enterprise and FTT networks in which extremely low splice losses are required
• Wherever dependable and reproducible splicing results are required, regardless of fiber type, fiber manufacturer, fiber preparation and operator capabilities

Features of iLID Fusion Splicer
 

• First PC-based fusion splicer in the world
• Windows XP Professional operating system
• Graphic menu-driven user interface that can be operated intuitively and easily
• 6.4 inch color touchscreen (VGA resolution; 140x magnification) for simultaneous display of both fiber axes
• Multifunctional softkeys
• Compatible with all common USB accessories
• Compatible with all common software programs
• Special application software for splicing
• Integrated loudspeaker
• NTSC / PAL port for video output to TV set
• VGA port
• Interactive training and help videos as well as operating instructions integrated into the fusion splicer
• Remote service, data exchange and software updates via internet link
• Integrated GPS system with automatic altitude compensation
• Fully automatic splice process with autostart function
• High-precision core-to-core alignment by 1,300nm LID-Systemﾙ
• Fast, precise core-to-core alignment by CDSﾙ
• High-resolution video image evaluation system L-PASﾙ for fast pre-alignment, fiber position evaluation and endface evaluation and contamination detection
• Best possible splice loss due to optimization of each splicing operation with Automatic Fusion-time Control (AFCﾙ)
• Real-time splice loss measurement by LID-Systemﾙ
• Automatic fiber type detection
• Different preconfigured fixed programs for all common fiber types
• Virtually unlimited number of user-defined programs
• Virtually unlimited splice data memory for storing all splicing parameters incl. time, date, GPS coordinates all the way to images or videos of individual splicing sequences
• Long-lived, maintenance-free P&D electrodes
• Attenuation splice function to create high-accuracy attenuators in the range of 0.1dB to 10dB in 0.1dB increment  at 1,310nm and 1,550nm wavelength
• Splice function for erbium-doped fibers
• Tensile test capability with variable tensile force from 0.1N to 4.1N
• Altitude compensation up to 4,500m above sea level
• Serial interface
• USB1.1 and USB2.0 interface
• Ethernet LAN interface 10Mb/s or 100Mb/s
• Microphone input and headphone output
• Connection for pigtail adapter to splice tightbuffered pigtails with LID-Systemﾙ
• Slots for three 2.3Ah batteries
• Two 12V DC ports (Mini DIN) to connect additional accessories

iLID Fusion Splicer Specifications

 

Procedure	3-axis core-to-core alignment with LID-Systemﾙ or CDSﾙ as well as video image evaluation system L-PASﾙ
Suitable fibers	Single- and multimode glass fibers with cladding diameter of 125µm and coating diameters of 250µm to 900µm
Fiber clamping	On 125µm cladding
Splice loss (for identical fibers)	ﾕ Multimode fibers, typically <0.01dB ﾕ Standard single-mode fibers, typically <0.02dB ﾕ Dispersion-shifted fibers, typically <0.04dB ﾕ NZDS fibers, typically <0.03dB
Accuracy of splice loss measurement	Typical deviations in LID mode <0.02dB
Splicing operation	Fully automatic or manual in individual increments
Splice process control system	ﾕ LID-Systemﾙ with core-to-core alignment and automatic fusion-time control AFCﾙ ﾕ CDSﾙ with core-to-core alignment ﾕ L-PASﾙ video mode cladding alignment and pre-alignment / fiber evaluation
Fiber alignment	Pre-alignment in z-direction with stepper motors, three-axis precision alignment with piezo-ceramic actuators
Splice analysis	Splice loss measurement (LID-Systemﾙ) or splice loss estimation (CDSﾙ); Tensile test adjustable between 0.1N and 4.1N
Endface evaluation	Cleave angle detection, endface quality evaluation, fiber position evaluation, core evaluation (CDSﾙ), contamination detection
Fiber display	High-contrast 6.4 inch color TFT touchscreen monitor; magnification approx. 140x; adjustable brightness
Splice cycle time	LID-Systemﾙ: 35s to 40s CDSﾙ: 15s to 25s L-PASﾙ: 10s to 20s
Splice protection	Heat-shrink splice protector or crimp splice protector
PC system	ﾕ 1GHz processor ﾕ 256MB SDRAM main memory ﾕ 20GB hard disk ﾕ Integrated loudspeaker ﾕ Open Windows XP Professional operating system ﾕ 10Mb/s or 100Mb/s Ethernet
Interface	ﾕ VGA output terminal ﾕ USB2.0 or USB1.1 ﾕ 10Mb/s or 100Mb/s Ethernet Cat.5 RJ-45 interface ﾕ Video PAL / NTSC, Cinch socket 75 Ohms ﾕ Microphone input, 3.5mm phone socket ﾕ Headphone output, 3.5mm phone socket ﾕ RS232 / V.24 ﾕ External LID transmitter (pigtail adapter), 3.5mm phone socket
Additional software functions	ﾕ Fixed programs for different common fiber types, one fusion curve splice program and two attenuation splice programs ﾕ The only restriction on user-defined programs is the available memory space on the hard disk (>100,000) ﾕ Database for splice data, images and videos only restricted by the available memory space on the hard disk ﾕ Autostart function ﾕ Automatic selection of suitable splice process control system ﾕ Automatic compensation for poor fiber position ﾕ Automatic compensation for poor cleave angles up to 2.5° ﾕ Selectable splice process mode ﾕ Attenuation splice function for wavelength 1,310nm and 1,550nm in increments of 0.1dB from 0.1dB to 10dB ﾕ Automatic fiber type detection (LID-Systemﾙ) ﾕ Automatic fiber core detection (CDSﾙ) ﾕ Automatic compensation for altitudes up to 4,500m above sea level by GPS ﾕ Energy-saving function selectable in battery mode ﾕ Automatic initial self-test ﾕ Operating hours and total splice counters ﾕ Electrode replacement display in programmable intervals ﾕ Freely selectable electrode cleaning intervals ﾕ Clock and date display ﾕ Service support by special analysis program ﾕ Remote Service
GPS system	ﾕ External magnetic base with 6m connection cable for optimal reception ﾕ Horizontal accuracy: <6m ﾕ Vertical accuracy: <11m ﾕ Speed accuracy: 0.06m/s ﾕ PPS: ±95ns ﾕ Access times:       New access: <2s       Hot start: <14s       Warm start: <38s       Cold start: <90s
Environmental data	ﾕ Operating temperature: -10°C to+50°C ﾕ Storage temperature: -40°C to +80°C ﾕ Relative humidity <93%
Dimensions	200 x 220 x 140mm (L x W x H)
Weight of basic unit	Without batteries: 3.1kg or with three 2.3Ah batteries: 5.1kg
Power supply	ﾕ External 12V DC / 100W desktop power supply; input voltage 90V AC to 264V AC / 47Hz to 63Hz ﾕ DC input 12V ±10% (e.g., from vehicle wiring system via cigarette lighter port) ﾕ Internal 3x 12V 2.3Ah lead-gel batteries, individually exchangeable; approx. 3 hours operating time without heat-shrink oven and approx. 2.5 hours with RapidoShrink fast heat-shrink oven

For full Corning Optisplice iLID product specifications, please click here: Corning Optisplice iLID

Corning Siecor iLID SM MM Core Alignment LID-SYSTEM CDS Fusion Splicer

This Unit Has A Total Arc Count of 2,955!

First PC-based fusion splicer in the world (Windows XP Pro)

High-precision core-to-core alignment by 1300nm LID-System

Fast, precise core-to-core alignment by CDS

Integrated GPS system with automatic altitude compensation

Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs

Includes USFiberOptic USF-21C High Precision Fiber Cleaver, Hard Carrying Case & Accessories As Listed

i-lid i-lidunit2-1

Corning iLID i-LID Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 24925

• Corning i-Lid unit2-1 Fusion Splicer (BC# 24925)
  • Total Splice Count: 2,955
• USFiberOptic USF-21C High Precision Fiber Cleaver
• Clauss CFS-2 Fiber Optic Stripper
• 6 Month Fusion Splicer Care Kit FS6MC:
  • 4oz Flip Jar Of 99% Alcohol
  • (50) Non-Lint Dry Wipes
  • (6) Fiber Optic Wipes w/ 99% Alcohol
  • 2oz Pump Fast Evaporating Mirror Spray
  • (25) Camera Swabs
  • (25) V-Groove Swabs
• Pigtail Adapter
• Trimble GPS Antenna P/N: 39625-52
• USB Work Lamp
• Ethernet Cable
• Corning Cleaver (Blue)
• Stylus
• Assorted Tool Kit
• AC Adapter/Charger
• Power Cord
• RS232 PC Interface Cable
• Hard Carrying Case

Having trouble viewing this file? Click this link to download