Anritsu MU250000A4 MW9076C SM Long Haul Fiber OTDR

The MW9076 mini-OTDR series can perform a measurement three to five times faster than the well received, conventional MW9070B. Three and four-wavelength OTDRs are included among the new product lineup. The four-wavelength OTDR can measure the chromatic dispersion characteristics from one end of an optical fiber. Two types of color displays with high resolution (5cm) and many sampling points (50000 points) are available for indoor and outdoor use. The MW9076 series shows superior basic performance that enables a wide dynamic range and a short dead zone. It supports the construction and maintenance of the optical fiber cables. Moreover, using this OTDR, it is possible not only to quickly charge a lithium-ion battery but also to indicate the remaining battery charge.

High-speed measurement
It takes only 10 seconds to measure and display the waveform and connection loss on one screen. Just one press of the Start key is all that is needed to make measurements

Full automatic mode
Measurement results are displayed by simply pressing the Start key. All complicated settings of distance range, pulse width, attenuator, and maker can be automatically executed. Measurement speed in this mode was significantly increased. When the wavelengths are set to ALL, wavelengths are automatically changed.

Repeated measurement
A series of operations, such as measurement, wavelength switching, data saving, optical channel switching, and next optical fiber measurement, can be executed automatically under preset measurement conditions. This mode is ideal for measuring a multi-core optical fiber.

Waveform comparison function
Measured and saved data can be compared on the same screen. In addition, differences can be displayed as a waveform for simple observation of distance and level differences. This is useful for checking aging changes or comparing several fibers.

Optical fiber	SM
Wavelength	1.31/1.55/1.625 µm
Dynamic range	41.5/39.5/37 dB
Dead zone (Fresnel/back-scattered)	1.6/8 m
Chromatic dispersion	NO
Light Function Source	YES
Visible Light Source	YES
Optical Power Meter	YES
High Power Optical Power Meter	YES
Optical Channel Selector Unit	YES
Features	High performance three wavelength OTDR for testing at both the two standard SM (1310, 1550) window, but also the 1625 nm window used for fiber monitoring.
Automatic measurement	Measurement items: Total loss, total return loss. Each event distance, connection loss, return loss, or reflection amount (displays in table format) Threshold values Connection loss: 0.01 to 9.99 dB (in 0.01 dB steps), Return loss: 20 to 60 dB (in 0.1 dB steps), Fiber-end: 1 to 99 dB (in 1 dB steps) Warning values Splice connection loss: 0.1 to 10 dB (in 0.01 dB steps), Connector connection loss: 0.1 to 10 dB (in 0.01 dB steps),  *8 Return loss: 10 to 50 dB (in 0.1 dB steps), Fiber loss: 0.01 to 10 dB (in 0.01 dB steps), Total loss: 0.1 to 60 dB (in 0.1 dB steps), Total return loss: 10 to 50 dB (in 0.1 dB steps), Average loss: 0.01 to 10 dB (in 0.01 dB steps) Number of detected events: Up to 99 Automatic setting: Distance range, pulse width, averaging count (time) Measurement time: =60 s (in full automatic measurement mode) Connection check: Automatic check of front panel connector connection quality Communication light check: Check for presence of communication light in optical fiber to be measured
Optical loss measurement light source function	Applicable optical fibers: SM optical fiber (ITU-T G.652) Optical connectors: Shared with OTDR (same port) Light-emitting elements: FP-LD Center wavelength: 1310/1550/1625 ±25 nm (MW9076C, CW, 25°C) Spectrum width: =5/10/10 nm (MW9076C, CW, 25°C) Output level accuracy: ?3 ±1.5 dBm (CW, 25°C, SM optical fiber: 2 m) Optical output short term stability: =0.1 dB [CW, at one point from ?10° to +40°C (±1°C), Difference between maximum and minimum values in one min, SM optical fiber cable: 2 m] Output waveform CW, 270 Hz, 1 kHz, 2 kHz (Modulated waves are square waves.) Modulation frequency: 270 Hz/1 kHz/ 2 kHz ±1.5% Laser safety specification: 21CFR Class 1, IEC 60825-1 Class 1

   

For full Anritsu MU250000A MW9076C product specifications, please click here: Anritsu MU250000A MW9076C

Anritsu MU250000A4 MainFrame With MW9076C SingleMode 1310 / 1550 / 1625nm Long Haul Fiber OTDR Module

Dynamic Range:
1310 / 1550 / 1625 nm : 41.5 / 39.5 / 37 dB

Includes Carrying Case & Accessories As Listed

MU250000A

Anritsu MU250000A4 MW9076C MU-250000A4 MW-9076C OTDR Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 26904 26905

• Anritsu MU250000A4 OTDR Mainframe (BC# 26904) 
• Anritsu MW9076C Singlemode Long Haul OTDR Module (BC# 26905)
  • SM OTDR Source:
    • 1310nm
    • 1550nm
    • 1625nm
• EXFO SPSB-B-150-89-101 SM FC-LC Fiber Launch Cable
• Sandisk CF Reader w/ USB Cable
• Kingston PC Card Adapter w/ 128 MB Flash Card
• IBC Brand Cleaner LC
• Senco Smart Cleaner HC
• (2) SM FC-FC Fiber Cables
• Anritsu MX907600A Emulation Software
• (4) Fiber Wipes
• AC Adapter/Charger
• Power Cord
• RS232 PC Interface Cable
• Carrying Case w/ Strap

Having trouble viewing this file? Click this link to download