NOYES MLP 5-2B MM Light Pack MM Fiber Test Kit
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Noyes Multimode Test Set (MLP 5-2B)
The Noyes MLP5-2 fiber optic loss test kit combines the OPM5-2C optical power meter and OLS1-Dual LED light source and is ideally suited for testing multimode fiber optic networks.
The OLS1-Dual features 850 nm and 1300 nm LED output from a single output port and is easy to operate with only a power button and a wavelength select button. The LED output is stabilized to ensure accurate test results per current TIA/EIA requirements. This light source offers 3 modes of operation: Dual wavelengths sending ID, single wavelength sending ID, and CW. [Active Output], [Battery], and [External Power] indicators identify the currently enabled operating mode, battery charge status, and external power presence. The output port is equipped with a removable SC (FC & ST available) adapter to allow the output connector to be inspected and cleaned.
The OPM5-2C offers Wave ID, automatic wavelength identification and switching, when used with the OLS1-Dual light source. The OPM5-2C stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or ¼W] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. Up to 500 records per wavelength of power or insertion loss measurements may be stored in internal non-volatile memory.
Using the supplied Windows® compatible software and USB connection, test records may be transferred to a PC for storage, display, analysis, and printing.
In addition to being powered by two AA alkaline, the OPM5-2C or OLS1-Dual can be powered by optional AC adapter and/or rechargeable NiMH battery pack.
The OPM5-2C optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately.
The OPM5-2C and OLS1-Dual are fully N.I.S.T. traceable.
Features:
- Rugged, handheld, lightweight
- Designed for field use
- Certify multimode fiber links per TIA/EIA standards
- Wave ID - automatic wavelength identification and switching
- Dual Wave ID, single Wave ID, and CW
- Large LCD with Backlight
- Power measurements in dBm or µW; insertion loss in dB
- Reference power level storage
- Up to 500 test records storage per wavelength
- USB port for download of stored records
- AA alkaline, optional rechargeable NiMH battery pack or AC adapter
- Low battery indicator
- Free 50 µm and 62.5 µm mandrels
- Cost-effective, easy to use
- N.I.S.T. traceable
OPM 5-2C
The OPM 5 is used to perform diagnostic and evaluation measurements associated with fiber optic transmission systems and cable plant. Applications for the OPM 5 will be found within the telecommunication, cable television, data network, and industrial control industries.
The OPM 5 measures absolute power (in dBm or µW ) and loss (dB). Absolute power expressed in dBm is the amount of optical power received by the detector as compared to 1mW (0dBm=1mW). Measuring dBm is useful for verifying the output power of a transmitter and determining system losses.
Loss is the difference in optical power from a known input (the reference level) and the output power at the opposite end of the fiber under test. The OPM 5 can display dB loss directly after a reference level has been set. Loss measurements are used to qualify cable plant links and fiber optic jumpers.
Microwatts is also a way to measure absolute power. Some manufacturers specify their transmission equipment in watts instead of dBm. The OPM 5 offers the ability to measure watts for convenience when verifying output power of transmitters. For accurate results, always be sure to set the OPM 5 to measure the same wavelength as the output of the optical light source.
Specifications:
| Calibration Wavelength (nm) | 850, 1300, 1310, 1550nm |
| Tone Detection Range (dBm) | +6 to - 35 |
| Tone Detection Frequency (Hz) | 270 ± 13.5 1000 ± 50 2000 ± 300 |
| Detector Type | Germanium (Ge) |
| Display Range (dBm) | +6 to -60 dBm |
| Accuracy (@ 25°C & -10.0dBm) | ±0.25 dB |
| Resolution | 0.01 dB (.1 dB selectable) |
| Battery Life | >30 hrs. typical operation with 9V Alkaline |
| Adapter Caps | Order Separately (ST, SC, FC and others available) |
| Size (H x W x H) | 5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm) |
| Weight | 0.56 lb (0.26 kg) |
| Operating Temp | 0° to 50° C |
| Storage Temp | 30° to 60° C |
| Relative Humidity | 0 to 95% (non-condensing) |
Optical Light Source OLS 1-Dual
| Emitter Type | LED |
| Emitter Classification | Class 1, IEC 825 |
| Spectral Width | 40, 100 nm |
| Wavelength | 850, 1300 nm |
| Stability (@25° C & 5 min. warm-up) | ±.1 dB/8 hrs. |
| Output Power | |
| Multimode (62.5/125 ìm) | -20 dBm @ 850 nm, -20 dBm @ 1300 nm |
| Singlemode (9/125 ìm) | -40 dBm @ 1300 nm |
| Power | 40 hrs. typical operation with 9V alkaline, AC adapter optional |
| Optical Adaptors | ST or SC |
| Size (H x W x D) | 4.6 x 2.6 x 1.2 in (11.6 x 6.6 x 3.1 cm) |
For full Noyes MLP 5-2B product specifications, please click here: Noyes MLP 5-2B
AFL Noyes MLP5-2B MM Fiber Loss Test Set
OPM 5-2C SM MM Optical Power Meter
&
OLS1D MM 850 / 1300nm Optical Light Source
OPM5-2C Power Meter:
- 850nm
- 1300nm
- 1310nm
- 1550nm
Includes Hard Carrying Case & Accessories As Listed
MLP5-2 OLS-1 OLS 1 OPM5-2 OPM5-2C
Noyes MLP2B MLP-2B MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 16459 16458