Fitel PMX JDSU WaveShifter 300 Optical Circuit WDM
Key Features:
- Double the fiber capacity of metro and access links
- No 1550 nm transmitter to purchase
- <3 dB insertion loss (end to end)
- Save time and money over new fiber
- Utilize fiber more efficiently
- Recover fiber for new services
Compliance
- SONET OC-1, OC-3, OC-12, and OC-48
- CSA - C22.2 and UL 1950
- FCC Class B, part 15
- IEC 825 Parts 1 and 2
- FDA CFR Title 21, Parts 1040.10 and 1040.11
- NEBS 3 compliant
The WaveShifter 300 module conserves fiber by using 1310/1550 nm wavelength division multiplexing (WDM) to combine two signals onto one fiber. Any 1310 nm fiber transmission system can be used with the WaveShifter 300 products.
The WaveShifter 300 works with a passive WDM coupler and the WaveShifter WDM to "shift" the transmission 1310 nm signal to the 1550 nm fiber window, using WDM to combine the 1550 nm signal with the receive 1310 nm signal. The WaveShifter 300/622 works from 6 Mb/s (OC-3) to 622 Mb/s (OC-12) data rates.
The WaveShifter 300 can be installed in any 19-inch/23-inch telecommunication rack using the JDSU FiberShelf. The WaveShifter 300 module is widely accepted for use in metropolitan or access network links.
Specifications| Optical | |
| Wavelength (Tx port) | 1260 to 1580 nm |
| Range (Tx port) | -25 to -3 dBm |
| Fiber type (Tx port) | Single mode or 50 ìm multimode |
| Wavelength (Rx port) | 1290 to 1330 nm |
| Extinction ratio | 8.2 dB |
| Fiber type (Rx port) | Single mode, 50 ìm or 62.5 ìm multimode |
| COM (port) output wavelength | 1530 to 1565 nm |
| COM (port) output power level | -3 to 0 dBm |
| COM (port) output fiber type | Single mode |
| Insertion loss from COM to Rx port | <1.5 dB |
| Isolation from COM to Rx at 1550 nm | >40 dB |
| Spectral width | 1.0 nm (-20 dB) |
| Connectors | SC/PC |
| Transmission | |
| Rate | 6 to 622 Mb/s |
| Format | NRZ |
| Management | |
| Craft interface | TL-1 and menu mode |
| Craft port | DB-9 female connector, RS232 |
| Alarms | One Form B relay, active closed |
| Displays | LED display |
| Physical | |
| Mounting | Shelf, dual, or single configurations |
| Power | 6 W maximum, -48 V DC nominal (-40 to -60 V DC) |
| Dimensions (W x H x D) | 2.54 x 15.24 x 24.77 cm (1 x 6 x 9.75 inches) |
| Environmental | |
| Operating temperature1 | -40 to 65 °C (note1) |
| Storage temperature | -40 to 85 °C |
| Humidity | 95% RH non-condensing |
Includes:
- FiTeL PMX Model Number 504.340.006 WaveShifter 300
- (5) Bulkhead Swabs
- Alcohol Wipe
- Hard Copy User Manual
- Original Factory Box
For full FiTeL WaveShifter 300 specifications, please click here: FiTeL WaveShifter 300
Use with WaveShifter WDM modules to install a two-fiber system on one fiber or a four-fiber system on two fibers.
This unit Is Brand New & In Perfect Working Condition!
FiTeL WaveShifter 300 WaveShifter-300 WDM DWDM Network Analyzer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.