On Sale! Noyes OPM4 SM MM Fiber Loss Test Set Model OPM-4 Noyes 4

Request a Quote

Request a Quote for

Have Questions or doubts? Submit the following request and expect our detailed quote within 24 hours!

we are commited to win your business!

Company

E-mail address

First Name

Phone Number

Last Name

Country

Comment

Description

OLS1 Dual Light Source

OPTICAL	OLS1-DUAL (SINGLE PORT)
Wavelength	850 ±30 nm	1300 +50/-10 nm
Emitter Type	LED,Class I FDA 21 CFR 1040.10 and 1040.11, IEC 60825-1: 2007-03
Spectral Width	40 nm (typ)	120 nm (typ)
Output Power	>-20 dBm b
Output Stability	±0.1 dB over 8 hours (after 5-minute warm-up)
Fiber Size	62.5 µm c
GENERAL
Power	2 AA batteries, optional AC adapter
Battery Life	Typical 30 hours, minimum 20 hours
Available Adapters	SC, FC, ST
Operating Temperature	-10°C to 50°C, 90 % RH (non-condensing)
Storage Temperature	-30°C to 60°C, 90 % RH (non-condensing)
Size (H x W x D)	14.0 x 8.1 x 3.8 cm (5.5 x 3.2 x 1.5 in)
Weight	0.29 kg (0.65 lb)

OLS2 Dual Laser Source

The OLS2-Dual from AFL Telecommunications is a handheld, rugged laser source designed for performing insertion loss measurements on single-mode fiber optic links when used with an optical power meter. When paired with an optical fiber identifier, the OLS2-Dual may be used for fiber identification. The LASER output is stabilized to ensure accurate test results per current TIA/EIA requirements.

The OLS2-Dual features 1310 nm and 1550 nm LASER output from a single output port and offers several modes of operation. Each wavelength may be transmitted individually at CW or with user selectable modulated Tone. Also, each wavelength may be transmitted with Wave ID. When transmitting with Wave ID, the OLS2-Dual supports transmitting pairs of wavelengths in an alternating pattern. Associated with each operating condition, the designated LED indicator will illuminate to identify the currently enabled operating mode and emitted wavelength(s) along with battery charge status and external power presence.

The OLS2-Dual output port is equipped with a UCI based removable adapter to allow the output connector to be inspected and cleaned. The OLS2-Dual offers long battery life from common AA alkaline batteries with external AC adapter available as an option.
The OLS2-Dual is fully N.I.S.T. traceable.

Features:

ﾕ	Handheld, rugged, lightweight
ﾕ	Dual wavelengths from a single port
ﾕ	Dual or single Wave ID, CW, To
ﾕ	270 Hz, 330 Hz, 1 kHz, 2 kHz Tone
ﾕ	Adjustable output
ﾕ	Low battery LED indicator
ﾕ	Long battery life with 2 x AA alkaline, optional AC adapter
ﾕ	Cost-effective, easy to use
ﾕ	N.I.S.T. Traceable

Applications:

ﾕ	Certify SM links per TIA/EIA standards
ﾕ	Fiber identification prior to splicing

Noyes OPM 4 - Adds Wave ID & Set Reference

The Noyes OPM 4 optical power meter may be used to measure optical power in Premises, Telco, or Broadband fiber optic networks. When used with an LED or Laser light source, the OPM 4 also measures insertion loss of multimode or single-mode cables.

The OPM 4 offers Wave ID, automatic wavelength identification and switching, when used with the OLS 1 Dual or OLS 2 Dual or OLS 4 with Wave ID feature. Multiple test Tone detection is provided for fiber identification. The OPM 4 stores optical references for each calibrated wavelength. An easy to read Dual Wavelength LCD display with Backlight shows measured power [dBm or µW] or insertion loss [dB], calibrated wavelengths, tone signal [Hz], wavelength ID, and the battery charge status. In addition to being powered by two AA alkaline, the OPM 4 can be powered by optional AC adapter and/or rechargeable NiMH battery pack.

The OPM 4 optical input port accepts Noyes thread-on style adapter caps. Adapter caps are required for operation and must be ordered separately. The OPM 4 is fully N.I.S.T. traceable.

The OPM 4-4C is calibrated at 850, 980, 1310, 1550, nm and designed for the higher power level requirements of long range, amplified optical spans used in CATV and DWDM networks.

Specifications:

Optical Specifications	OPM 4-4C
Calibrated Wavelengths (nm)	850, 1300, 1310, 1550
Detector Type	Filtered InGaAs
Measurement Range (dBm)	+26 to -50
Accuracy (dB)	+-.25
Measurement Units	dB, dBm, uW
General Specifications
Power	typical 60 hours with 9V battery
Adapter caps	order separately (ST, SC, FC, and others available)
Operating temperature	-10 to 50°C
Relative humidity	0 to 95% (non-condensing)
Storage temperature	-30 to 60°C
Size (H x W x D)	5.5 x 3.2 x 1.5 in (14.0 x 8.1 x 3.8 cm)
Weight	0.58 lb (0.26 kg)

For full Noyes OPM 4 OLS 1D OLS 2D product specifications, please click here: Noyes OPM 4 OLS 1D OLS 2D

Additional Information

AFL NOYES OPM4 Singlemode 1310nm/1550nm & Multimode 850nm/1300nm Loss Test Set

NOYES OPM 4-4C Optical Power Meter
850nm
1300nm
1310nm
1550nm

NOYES OLS2 Dual Laser Source
1310nm
1550nm

Noyes OLS1 Dual Optical Light Source
850nm
1300nm

Includes Carrying Case & Accessories As Listed

OPM4-4 C OLS2-D OLS 1-D 1

Noyes OPM4 OPM-4 SM MM Fiber Loss Test Set Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

BC# 09805 14053 14002

Included

Noyes OPM 4-4C Optical Power Meter (BC# 09805)
- 850nm
- 1300nm
- 1310nm
- 1550nm
- Interchangeable ST Connector
- Interchageable FC Connector
Noyes OLS1 Dual Light Source (BC# 14053)
- 850nm
- 1300nm
- Interchangeable ST Connector
Noyes OLS2 Dual Laser Source (BC# 14002)
- 1310nm
- 1550nm
- Interchangeable FC Connector
Noyes 5400-00-0201 Mandrell w/ Instructions
Noyes 5400-00-0202 Mandrell w/ Instructions
Fiber Cables:
- (2) SM ST-ST
- (2) MM SC-ST
- Interchangeable SC-SC
- Interchangeable ST-ST
Hard Copy User Manual
User Manual On CD-ROM
Carrying Case

Datasheet

Having trouble viewing this file? Click this link to download

Noyes OPM4-2 SM MM Fiber Optic Power Meter

NOYES SLP 4-6D SM 1310/1550nm Fiber Test Kit OPM 4-4D OLS 2D

AFL Noyes OPM4 SM MM Fiber Optic Loss Test Set