Fujikura FSM-18R SM MM Ribbon Fiber Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 90 Day Exchange
Fujikura FSM-18R Ribbon Fusion Splicer
The Fujikura Fusion Splicer ﾖ FSM-18R is a 4-fiber ribbon splicer with similar versatility and robust nature of the Fujikura 12-fiber ribbon splicer. Well-suited for FTTx or LAN applications, the FSM-18R fusion splicer can splice up to 4 fibers, as well as, single fibers. The enhanced robust features provide resistance to shock, dust, and rain to minimize downtime and improve operational performance and withstands a 30ﾔ drop test.
Automated features such as auto-start splicing, auto-start tube heater operation, automatic ribbon fiber identification, and auto-arc calibration reduce operational steps and improve splicing performance. Additional improvements include automatic image orientation when switching the dual position monitor, a large capacity battery option and the ability to charge the battery during splicer operation.
New software included with each splicer provides the ability to download splice data to a PC for splice data reporting, download splicer operating software via the internet to maintain peak performance, and download video images from the splicer to enhance technical support.
Features:
- Highly durable ﾖ designed for tough environments
- Suitable for splicing up to 4-fibre ribbon
- Cladding alignment with fixed V-groove
- Auto-start tube heater
- Splice image capture facility
- Software upgrade via Internet
- Includes multi-function worktable
Specifications:
| Applicable fibres | SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU-T G.653), NZDS (ITU-T G.655) |
| Fibre Count | Single, 2 and 4 |
| Cladding diameter | 125µm |
| Coating diameter | Ribbon fibre thickness 250 and 400µm. Single fibre 250 and 900µm |
| Fibre cleaved length | 10mm using FH-50-xx fibre holders, FH-60-250 and FH-60-900 |
| Actual average splice loss | 0.05dB with SM, 0.02dB with MM, 0.08dB with DS, 0.08dB with NZDS. Measured by cut-back method relevant to ITU-T standards. |
| Splice time | Typical 20sec. with standard SM fibre |
| Return loss | 60dB or greater |
| Splicing modes | Total number available equals 100; for pre-set modes and user programmable modes |
| Splice loss estimate | Cladding axis offset are taken into account for accurate loss estimate |
| Storage of splice result | The last 2000 results to be stored in the internal memory |
| Fibre display | X/Y, or both X and Y simultaneously |
| Magnification | 35x for single X or Y view, or 35x for X and Y view changeable to 90x |
| Viewing method | By two CMOS cameras for fibre viewing and 4.1inches TFT colour LCD monitor |
| Image change over | The fibre image is turned upside down automatically according to the monitor position |
| Operating condition | 0-3660m above sea level, 0-95% RH and -10 to 50°C respectively. |
| Mechanical proof test | 2N (standard) |
| Tube heater | Built-in auto-start tube heater with 10 heating modes and up to 20 for reference |
| Tube heat time | Typical 40sec.with FP-03 protection sleeve. |
| Applicable protection sleeve length | 60mm, 40mm and a series of micro sleeves. |
| No. of splice/heating with battery | 90 cycles with BTR-08. |
| Power supply | Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-13. 13.2Vd.c. with BTR-08 |
| Terminals | USB1.1 (USB-Mini B) for data and video signal transfer to PC |
| Wind protection | Max. wind velocity of 15m/s |
| Dimensions | 136(W) x 161(D) x 143(H) mm |
| Weight | 2.1kg, with ADC-13 AC Adaptor, 2.5kg, with BTR-08 Battery |
For full Fujikura FSM-18R product specifications, please click here: Fujikura FSM-18R
Fujikura FSM-18R Singlemode & Multimode Single & Ribbon Fiber Fusion Splicer
This Unit Has A Very Low Total Splice Count Of Only 2!!
Includes 6 Month Fusion Splicer Care Kit (FS6MC)
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
Includes Fujikura CT-30 High Precision Fiber Cleaver, Fujikura HJS-02 Hot Jacket Stripper, Hard Carrying Case & Accessories As Listed
FSM18R FSM 18R
Fujikura FSM-18R FSM18R Fusion Splicer Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.
BC# 14416
- Fujikura FSM-18R Arc Fusion Splicer (BC# 14416)
- Total Splice Count: 2
- Fujikura CT-30 High Precision Fiber Cleaver w/ Hard Case
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- Fujikura ADC-13 AC Adapter/Battery Charger
- Fujikura BTR-08 Battery Pack
- Fujikura HJS-02 Hot Jacket Stripper
- Fujikura FSM-60R And FSM-18R Quick Reference Guide
- Fujikura Fiber Holder Set FH-50-250
- Fujikura Fiber Holder Set FH-50-4
- Cooling Trays
- DCC-14 Battery Charger Cable
- Spare Electrode Set
- Power Cord
- USB PC Interface Cable
- User Manual On CD-ROM
- Strap For Unit
- Hard Carrying Case w/ Strap
