Corning Siecor MiniMass 5000 Series Fusion Splicer
Condition: Refurbished / Calibrated
Warranty: 1 YEAR WARRANTY
Shipping: USA & Worldwide
- Siecor MiniMass C752 5000 Series Fusion Splicer (BC# 31649)
- Siecor S46999-M9-C12 High Precision Fiber Cleaver (BC# 17280M)
- Clauss CFS-2 Fiber Optic Stripper
- 6 Month Fusion Splicer Care Kit FS6MC:
- 4oz Flip Jar Of 99% Alcohol
- (50) Non-Lint Dry Wipes
- (6) Fiber Optic Wipes w/ 99% Alcohol
- 2oz Pump Fast Evaporating Mirror Spray
- (25) Camera Swabs
- (25) V-Groove Swabs
- 6F Fiber Holder Set
- 125/250 Fiber Holder Set
- 12F Fiber Holder Set
- 125/900 Fiber Holder Set
- Pigtail Adapter
- Battery Charge Cable
- Battery Pack
- Power Cord
- RS232 PC Interface Cable
- Hard Copy User Manual
- Hard Carrying Case
Corning Cable Systemsﾒ miniMASS® micro fusion splicer automatically splices single fibers, as well as ribbons from two to twelve fibers. Because of its small size, the miniMASS fusion splicer is perfect in restricted locations where ribbon splicing has previously been impossible.
The miniMASS can splice standard fibers configured as pigtails, single loose fibers, factory-made ribbons, or field-ribbonized fibers. Aerial splice points, nodes and pedestals, as well as traditional high fiber count locations, are a snap with the miniMASS fusion splicer. With its L-PAS video imaging system, the unit automatically analyzes fiber positions, inspects cleave quality and cleanliness, fuses the fibers, and estimates individual splice loss. All of these steps are completed in 45 seconds. During the fiber inspection, an alarm and on-screen prompt warn the operator of any conditions the splicer interprets as less than ideal for a good splice.
The miniMASS fusion splicer provides 10 user-editable programs for storing splicing parameters. Up to 250 individual or 35 12-fiber ribbon splice loss values are held in memory that may be downloaded. The unit also provides reminders to perform routine electrode cleaning and replacement.
The fibers, prompts, and parameters are viewed on the large active matrix color LCD display that may be adjusted for contrast. The tilt stand also provides improved viewing and operation orientation.
Features / Benefits
- ﾓSnap-inﾔ magnetic handlers provide consistent fiber placement in grooves
- NEW! Large 5.5-inch color LCD improves fiber viewing
- Splices one fiber or ribbons with two to twelve fibers
- AC and camcorder-style battery power options in one case
- Current Optimization Program recommends current setting according to the fiber type, electrode conditions, and environmental influences
- One-button operation, fully automatic splice cycle
- On-screen error message combined with acoustic indicator
- Average lab loss for identical single-mode ribbons = 0.05 dB; typical field splice loss of 0.10 dB Summarized and individual splice loss upon completion of splice
- Active matrix color LCD with adjustable contrast displays all fibers in both x and y views alternately
- Flip-cover activated heat-shrink oven with LED heating indicator
| Principal Operation | Fixed V-groove, automatic Z-axis alignment |
| Fiber Coatings | 250 µm and 900 µm (single fibers), 0.40 mm x 3.15 mm (12-fiber ribbons) |
| Fiber Types | Single-mode, Multimode, Specialty Single-mode (DS, NZDS) |
| Typical Splice Loss | Lab: = 0.05 dB identical single-mode ribbon Field: < 0.10 dB single-mode ribbon |
| Operating Temperatures | -5° to + 45°C |
| Humidity | 95%, Non-condensing |
| Monitor | Black and White LCD, 25x, 5.5-inch diagonal |
| Power | AC: 90-260 V, 100W, 50-60 Hz; automatic voltage range selection DC: 12 V rechargeable battery provides approximately 15 ribbon splices fully charged (two batteries included with splicer) |
| Environmental Compensation | Current optimization program, altitude compensation adjustment |
For full Siecor C752 5000 product specifications, please click here: Siecor C752 5000