Corning CheckPoint Plus Optical Fiber Identifier
$0.00
Availability:
Out of stock
SKU
1D22
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
Request a Quote for
- Corning CheckPoint Plus Fiber Identifier (BC# 30581)
- 250 / RIB Fiber Adapter Head
- 3mm Fiber Adapter Head
- 900 Fiber Adapter Head
- Hard Copy User manual
- Carrying Case
CheckPointﾙ Plus Features:
- Passive detection of traffic: No signal interruption
- Supports multiple sizes for a variety of applications
- Rugged design that can be used anywhere
- 850 nm ﾖ 1700 nm range for Single-mode and multimode applications
Corning Cable Systems CheckPointﾙ Plus Fiber Identifier uses non-destructive, local detection technology to ensure fiber integrity and provide reliable identification. It safely clips onto fibers in midspan to detect the presence of a signal without interrupting traffic with LEDs indicating the type of signal and transmission direction.
The integral power meter simultaneously displays the relative core power, allowing isolation and measurement of faults and in-line components such as splitters, splices and connectors. Due to a wide range detector, the identifier can be used for single-mode and most multimode applications. Simply inserting a fiber and closing the thumb switch provides immediate results.
To distinguish a single fiber from other active or dark fibers, the 2 kHz test signal of a laser source can be transmitted from one end of the fiber and detected midspan by the CheckPoint Plus Fiber Identifier. Designed for use everywhere fiber is placed, interchangeable adapters provide optimized performance on multiple fiber sizes including 250 µm coating, 900 µm tight-buffered, 1.6 mm, 2.0 mm and 2.9 mm/3.0 mm jacketed and ribbon fibers.
Specifications
| Signal Indicators | Traffic presence: ﾕ 2 kHz test signal ﾕ Transmission direction ﾕ Detects 2 kHz, 1 kHz and 20 Hz ﾕ Self-test and low battery indication |
| Detector Sensitivity | -40 dBm at 1310 nm |
| Induced Loss | 0.6 dB at 1310 nm (typical) |
| Spectral Response | 850 nm to 1700 nm |
| Core Power Reading | 5 to -40 dBm ± 2 dB (1 dB resolution) |
| Fiber Slack | 20 mm (0.75) in required |
| Operating Temperature | -20º to +50ºC (-4º to +122ºF) |
| Storage Temperature | -40º to +60ºC (-40º to +140ºF) |
| Humidity | 0 to 90% non-condensing |
| Dimensions (H x W x D) | 190 x 32 x 25 mm (7.50 x 1.25 x 1.00 in) |
| Weight | 8 oz (230 g) with battery |
| Battery | One 9 V alkaline battery, approximately 5,000 readings |
For full Corning CheckPoint Plus product specifications, please click here: Corning Checkpoint Plus