Corning TKT-Anaerobic2 Fiber Connector Tool Kit
$0.00
Availability:
Out of stock
SKU
7D02
Condition: Refurbished
Warranty: 90 Day Exchange
Shipping: USA & Worldwide
Request a Quote for
Corning Cable Systems' Anaerobic Connector installation tool kits are designed with the installer in mind. Conveniently packaged in an easy-to-carry ballistic nylon bag, the tool kits are compact and easy to carry around the job site.
The standard consumable kit, TKT-ANAEROBIC2 (AC 286318), allows to installation and polishin of multimode and singlemode all-ceramic anaerobic connectors as well as the anaerobic GIC connectors. All connectors can be polished with this kit; LC, SC, FC and ST-compatible.
The anaerobic epoxy uses a two-part component process:
* The adhesive is first injected in the ferrule
* The fiber is then dipped into the primer and inserted into the connector. Curing of the epoxy takes one minute without the use of lamps or oven.
Features & Benefits
* Fast cure anaerobic adhesive; does not require electrical power, lamps or oven
* Installs without index matching gel
* Minimal tools required
* Hand polish; doesn't require polishing machine
* Low material cost
* The Glass-In-Ceramic (GIC) ferrule allows easy polishing with high yield reducing the installation time (less than 3 minutes to assemble and polish)
* Average insertion loss of 0.2 dB with physical contact polish
Accessories
* (1) Scissors
* (1) Tweezers
* (2) Anaerobic Adhesive
* (2) Anaerobic Primer
* (1) Compressed Air Can
* (1) Permanant Marker
* (1) Strip Length Card for ST/SC/FC Fiber
* (1) Strip Length Card for LC Fiber
* (1) Fiber Stripping Tool
* (1) 302 um No-Nik Stripper
* (1) Jacket Stripper
* (1) Ruby Fiber Scribe
* (12) Alcohol Pads
* (1) Corning Fiber Scope
* (1) FMA-U12 Universal Fiber Adapter for Fiber Scope
* (1) Soft Case for Fiber Scope
* (2) Work Surfaces
* (2) Precision Rubber Pads (5MM x 5" Disk)
* Assorted Emery Paper
* (1) Package 863X Lapping Film
* Manual for Tool Kit
* Hanging Strap for Carrying Case
* Canvas Carrying Case
For full Corning TKT-Anaerobic2 product specifications, please click here: Corning TKT-Anaerioboic2
The standard consumable kit, TKT-ANAEROBIC2 (AC 286318), allows to installation and polishin of multimode and singlemode all-ceramic anaerobic connectors as well as the anaerobic GIC connectors. All connectors can be polished with this kit; LC, SC, FC and ST-compatible.
The anaerobic epoxy uses a two-part component process:
* The adhesive is first injected in the ferrule
* The fiber is then dipped into the primer and inserted into the connector. Curing of the epoxy takes one minute without the use of lamps or oven.
Features & Benefits
* Fast cure anaerobic adhesive; does not require electrical power, lamps or oven
* Installs without index matching gel
* Minimal tools required
* Hand polish; doesn't require polishing machine
* Low material cost
* The Glass-In-Ceramic (GIC) ferrule allows easy polishing with high yield reducing the installation time (less than 3 minutes to assemble and polish)
* Average insertion loss of 0.2 dB with physical contact polish
Accessories
* (1) Scissors
* (1) Tweezers
* (2) Anaerobic Adhesive
* (2) Anaerobic Primer
* (1) Compressed Air Can
* (1) Permanant Marker
* (1) Strip Length Card for ST/SC/FC Fiber
* (1) Strip Length Card for LC Fiber
* (1) Fiber Stripping Tool
* (1) 302 um No-Nik Stripper
* (1) Jacket Stripper
* (1) Ruby Fiber Scribe
* (12) Alcohol Pads
* (1) Corning Fiber Scope
* (1) FMA-U12 Universal Fiber Adapter for Fiber Scope
* (1) Soft Case for Fiber Scope
* (2) Work Surfaces
* (2) Precision Rubber Pads (5MM x 5" Disk)
* Assorted Emery Paper
* (1) Package 863X Lapping Film
* Manual for Tool Kit
* Hanging Strap for Carrying Case
* Canvas Carrying Case
For full Corning TKT-Anaerobic2 product specifications, please click here: Corning TKT-Anaerioboic2